Download or read book Prediction of Transport and other physical Properties of Fluids 11 written by S. Bretsznajder and published by . This book was released on 1971 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prediction of Transport and Other Physical Properties of Fluids written by S. Bretsznajder and published by Elsevier. This book was released on 2013-10-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prediction of Transport and Other Physical Properties of Fluids reviews general methods for predicting the transport and other physical properties of fluids such as gases and liquids. Topics covered range from the theory of corresponding states and methods for estimating the surface tension of liquids to some basic concepts of the kinetic theory of gases. Methods of estimating liquid viscosity based on the principle of additivity are also described. This volume is comprised of eight chapters and opens by presenting basic information on gases and liquids as well as intermolecular forces and constitutive and additive properties of chemical compounds. The reader is then introduced to practical methods for computing the values of physico-chemical quantities necessary for designing technological processe. Subsequent chapters focus on the surface tension of liquids and its dependence on molecular properties; the phenomenon of internal friction (viscosity) in fluids; graphical interpolation and extrapolation of liquid viscosity data; and the thermal conductivity of gases and liquids. The final two chapters examine diffusion in gases and liquids, with emphasis on the methods used for estimating the coefficients of diffusion. This book will be of interest to chemists and students and research workers in chemistry.
Download or read book Thermophysical Properties of Fluids written by Marc J. Assael and published by World Scientific. This book was released on 1996 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the prediction of thermodynamic and transport properties of gases and liquids. The prediction of such properties is essential for the solution of many problems encountered in chemical and process engineering as well as in other areas of science and technology. The book aims to present the best of those modern methods which are capable of practical application. It begins with basic scientific principles and formal results which are subsequently developed into practical methods of prediction. Numerous examples, supported by a suite of computer programmes, illustrate applications of the methods. The book is aimed primarily at the student market (for both undergraduate and taught postgraduate courses) but it will also be useful for those engaged in research and for chemical and process engineering professionals.
Download or read book Transport Properties of Fluids written by Jürgen Millat and published by Cambridge University Press. This book was released on 2005-11-17 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most reliable methods for evaluating the transport properties of pure gases and fluid mixtures, such as viscosity, thermal conductivity and diffusion. The authors place particular emphasis on recent theoretical advances in our understanding of fluid transport properties in all the different regions of temperature and pressure. In addition to the important theoretical tools, the authors cover the different methods of data representation, and they follow this with a section that demonstrates the application of selected models in a range of circumstances. They then offer case studies of transport property analysis for real fluids, and the book concludes with a discussion of various international data banks and prediction packages. Advanced students of kinetic theory, as well as engineers and scientists involved with the design of process equipment or the interpretation of measurements of fluid transport properties, will find this book indispensable.
Download or read book Transport Properties of Fluids written by Jürgen Millat and published by Cambridge University Press. This book was released on 1996-06-13 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most reliable methods for evaluating the transport properties of pure gases and fluid mixtures, such as viscosity, thermal conductivity and diffusion. The authors place particular emphasis on recent theoretical advances in our understanding of fluid transport properties in all the different regions of temperature and pressure. In addition to the important theoretical tools, the authors cover the different methods of data representation, and they follow this with a section that demonstrates the application of selected models in a range of circumstances. They then offer case studies of transport property analysis for real fluids, and the book concludes with a discussion of various international data banks and prediction packages. Advanced students of kinetic theory, as well as engineers and scientists involved with the design of process equipment or the interpretation of measurements of fluid transport properties, will find this book indispensable.
Download or read book Advances in Transport Properties of Fluids written by Marc J. Assael and published by Royal Society of Chemistry. This book was released on 2014 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in the field, this book will provide a valuable, current account of the advances in the measurement and prediction of transport properties that have occurred over the last twenty years. Critical to industry, these properties are fundamental to, for example, the development of fossil fuels, carbon sequestration and alternative energy sources. This unique and comprehensive account will provide the experimental and theoretical background of near-equilibrium transport properties which provide the background when investigating industrial applications. Coverage includes new experimental techniques and how existing techniques have developed, new fluids eg molten metals, dense fluids, and critical enhancements of transport properties of pure substances. Practitioners and researchers in chemistry and engineering will benefit from this state of the art record of recent advances in the field of transport properties.
Download or read book Transport Properties of Organic Liquids written by G. Latini and published by WIT Press. This book was released on 2006 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: The liquid state is possibly the most difficult and intriguing state of matter to model. Organic liquids are required, mainly as working fluids, in almost all industrial activities and in most appliances (e.g. in air conditioning). Transport properties (namely dynamic viscosity and thermal conductivity) are possibly the most important properties for the design of devices and appliances. Most theoretical studies on the liquid state date back to the Fifties however huge advances in experimental studies and applied research on heat and mass transfer in liquids have been achieved during past decades. Most of the models cannot rely on theory alone and are empirical, while for most organic liquids, only a few experimental points and empirical correlations are available in literature.The aim of this book is to present both theoretical approaches and the latest experimental advances on the issue, and to merge them into a wider approach. The book is organised into five chapters. The first chapter presents our theoretical knowledge of the liquid state. The second presents the tentative models for the evaluation of the thermal conductivity of organic liquids and confronts their results with the experimental data available in literature. The third presents the tentative models for the evaluation of the dynamic viscosity of organic liquids and confronts their results with the experimental data available in literature. The fourth presents a deeper review of the choice methods for thermal conductivity and their applications to mixtures of organic liquids and the fifth chapter presents a deeper review of the choice methods for dynamic viscosity and their applications to mixtures of organic liquids.
Download or read book Symposium on Transport Properties of Fluids Fluid Mixtures Their Measurement Estimation Correlation Use 10 11 April 1979 written by and published by . This book was released on 1979 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1980 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical Properties of Chemicals and Hydrocarbons written by Carl L. Yaws and published by William Andrew. This book was released on 2014-06-20 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiled by an expert in the field, the book provides an engineer with data they can trust. Spanning gases, liquids, and solids, all critical properties (including viscosity, thermal conductivity, and diffusion coefficient) are covered. From C1 to C100 organics and Ac to Zr inorganics, the data in this handbook is a perfect quick reference for field, lab or classroom usage. By collecting a large – but relevant – amount of information in one source, the handbook enables engineers to spend more time developing new designs and processes, and less time collecting vital properties data. This is not a theoretical treatise, but an aid to the practicing engineer in the field, on day-to-day operations and long range projects. Simplifies research and significantly reduces the amount of time spent collecting properties data Compiled by an expert in the field, the book provides an engineer with data they can trust in design, research, development and manufacturing A single, easy reference for critical temperature dependent properties for a wide range of hydrocarbons, including C1 to ClOO organics and Ac to Zr inorganics
Download or read book The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals written by Carl L. Yaws and published by Gulf Professional Publishing. This book was released on 2015-01-06 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refineries and petrochemical engineers today are accepting more unconventional feedstocks such as heavy oil and shale, causing unique challenges on the processing side of the business. To create more reliable engineering design of process equipment for the petrochemical industry, petroleum engineers and process managers are forced to study the physical properties and compounds of these particular hydrocarbons. Instead of looking up each compound’s information, The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals, Second Edition presents an easy-to-use format with rapid access to search for the particular compound and understand all the complex calculations in one tabular format. Understanding the composition of hydrocarbons is not easy to calculate quickly or accurately, but this must-have reference leads the engineer to better estimated properties and fractions from easily measured components. Expanded to cover more total compounds and relevant functions, The Yaws Handbook of Physical Properties for Hydrocarbons and Chemicals, Second Edition remains a necessary reference tool for every petrochemical and petroleum engineers’ library. Coverage added on elements for hydrocarbons and chemicals with more than 200 real-world cases included for practicality Increased compound coverage from 41,000 to 54,000 total compounds to quickly access for everyday use New functions added such as testing boiling point temperature and new data on density and refractory index
Download or read book The Technological Importance of Accurate Thermophysical Property Information written by J. V. Sengers and published by . This book was released on 1980 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preliminary Chemical Engineering Plant Design written by W.D. Baasal and published by Springer Science & Business Media. This book was released on 1989-11-30 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference covers both conventional and advanced methods for automatically controlling dynamic industrial processes.
Download or read book Viscosity of Liquids written by Dabir S. Viswanath and published by Springer Science & Business Media. This book was released on 2007-03-31 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in that it brings together published viscosity data, experimental methods, theoretical, correlation and predictive procedures in a single volume. The readers will get a better understanding of why various methods are used for measuring viscosity of different types of liquids and why an experimental method is dependent on fluid characteristics, such as Newtonian or non-Newtonian fluids.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1986 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermophysical Properties of Fluids Argon ethylene parahydrogen nitrogen nitrogen trifluoride and oxygen written by Ben Younglove and published by American Institute of Physics. This book was released on 1982 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Properties of Fluids written by Joseph Kestin and published by . This book was released on 1988 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Band 1.
