Download or read book Mechanics of Fretting Fatigue written by D.A. Hills and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failures of many mechanical components in service result from fatigue. The cracks which grow may either originate from some pre-existing macroscopic defect, or, if the component is of high integrity but highly stressed, a region of localized stress concentration. In turn, such concentrators may be caused by some minute defect, such as a tiny inclusion, or inadvertent machining damage. Another source of surface damage which may exist between notionally 'bonded' components is associated with minute relative motion along the interface, brought about usually be cyclic tangential loading. Such fretting damage is quite insidious, and may lead to many kinds of problems such as wear, but it is its influence on the promotion of embryo cracks with which we are concerned here. When the presence of fretting is associated with decreased fatigue performance the effect is known as fretting fatigue. Fretting fatigue is a subject drawing equally on materials science and applied mechanics, but it is the intention in this book to concentrate attention entirely on the latter aspects, in a search for the quantification of the influence of fretting on both crack nucleation and propagation. There have been very few previous texts in this area, and the present volume seeks to cover five principal areas; (a) The modelling of contact problems including partial slip under tangentialloading, which produces the surface damage. (b) The modelling of short cracks by rigorous methods which deal effectively with steep stress gradients, kinking and closure. (c) The experimental simulation of fretting fatigue.

Download or read book Fretting Fatigue written by David W. Hoeppner and published by ASTM International. This book was released on 2000 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 36 of the 40 papers presented at the symposium, and a collection of six keynote papers providing background on the subject. Topics covered include parameter effects, environmental effects, crack nucleation, material and microstructural effects, damage analysis, fracture mechanic

Download or read book Fretting Wear and Fretting Fatigue written by Tomasz Liskiewicz and published by Elsevier. This book was released on 2022-12-07 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fretting Wear and Fretting Fatigue: Fundamental Principles and Applications takes a combined mechanics and materials approach, providing readers with a fundamental understanding of fretting phenomena, related modeling and experimentation techniques, methods for mitigation, and robust examples of practical applications across an array of engineering disciplines. Sections cover the underpinning theories of fretting wear and fretting fatigue, delve into experimentation and modeling methods, and cover a broad array of applications of fretting fatigue and fretting wear, looking at its impacts in medical implants, suspension ropes, bearings, heating exchangers, electrical connectors, and more. - Covers theoretical fundamentals, modeling and experimentation techniques, and applications of fretting wear and fatigue - Takes a combined mechanics and materials approach - Discusses the differences and similarities between fretting wear and fretting fatigue as well as combined experimental and modeling methods - Covers applications including medical implants, heat exchangers, bearings, automotive components, gas turbines, and more

Download or read book Proceedings of the 9th International Conference on Fracture Fatigue and Wear written by Magd Abdel Wahab and published by Springer Nature. This book was released on 2022-03-11 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings gather a selection of peer-reviewed papers presented at the 9th International Conference on Fracture Fatigue and Wear (FFW 2021), held in the city of Ghent, Belgium on 2–3 August 2021. The contributions, prepared by international scientists and engineers, cover the latest advances in and innovative applications of fracture mechanics, fatigue of materials, tribology, and wear of materials. In addition, they discuss industrial applications and cover theoretical and analytical methods, numerical simulations and experimental techniques. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of fracture fatigue and wear.

Download or read book Failure of Materials in Mechanical Design written by Jack A. Collins and published by John Wiley & Sons. This book was released on 1993-10-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, 2nd Edition, covers the basic principles of failure of metallic and non-metallic materials in mechanical design applications. Updated to include new developments on fracture mechanics, including both linear-elastic and elastic-plastic mechanics. Contains new material on strain and crack development and behavior. Emphasizes the potential for mechanical failure brought about by the stresses, strains and energy transfers in machine parts that result from the forces, deflections and energy inputs applied.

Download or read book The Theory of Critical Distances written by David Taylor and published by Elsevier. This book was released on 2010-07-07 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critical distance methods are extremely useful for predicting fracture and fatigue in engineering components. They also represent an important development in the theory of fracture mechanics. Despite being in use for over fifty years in some fields, there has never been a book about these methods – until now. So why now? Because the increasing use of computer-aided stress analysis (by FEA and other techniques) has made these methods extremely easy to use in practical situations. This is turn has prompted researchers to re-examine the underlying theory with renewed interest. The Theory of Critical Distances begins with a general introduction to the phenomena of mechanical failure in materials: a basic understanding of solid mechanics and materials engineering is assumed, though appropriate introductory references are provided where necessary. After a simple explanation of how to use critical distance methods, and a more detailed exposition of the methods including their history and classification, the book continues by showing examples of how critical distance approaches can be applied to predict fracture and fatigue in different classes of materials. Subsequent chapters include some more complex theoretical areas, such as multiaxial loading and contact problems, and a range of practical examples using case studies of real engineering components taken from the author's own consultancy work. The Theory of Critical Distances will be of interest to a range of readers, from academic researchers concerned with the theoretical basis of the subject, to industrial engineers who wish to incorporate the method into modern computer-aided design and analysis. - Comprehensive collection of published data, plus new data from the author's own laboratories - A simple 'how-to-do-it' exposition of the method, plus examples and case studies - Detailed theoretical treatment - Covers all classes of materials: metals, polymers, ceramics and composites - Includes fracture, fatigue, fretting, size effects and multiaxial loading

Download or read book Standardization of Fretting Fatigue Test Methods and Equipment written by Mahmoud Helmi Attia and published by ASTM International. This book was released on 1992 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fretting Fatigue written by Steven E. Kinyon and published by ASTM International. This book was released on 2003 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 29 contributions drawn from the Third International Symposium on Fretting Fatigue held in Nagaoka, Japan in May 2001. Sections of the volume address fretting wear and crack initiation; fretting fatigue crack and damage; life prediction; fretting fatigue parameter effects; loading condition

Download or read book Tribocorrosion of Passive Metals and Coatings written by D Landolt and published by Elsevier. This book was released on 2011-10-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribocorrosion causes the degradation or alteration of materials through the combined action of corrosion and wear. It limits the performance and life-time of installations, machines and devices with moving parts, and controls certain manufacturing processes such as chemical–mechanical polishing. The effects of tribocorrosion are most pronounced on passive metals which owe their corrosion resistance to a thin protecting oxide film. Most corrosion-resistant engineering alloys belong to this category.This book provides an introduction to the developing field of tribocorrosion and an overview of the latest research. Part one reviews basic notions of corrosion and tribology, before presenting the most recent results on the growth and structure of passive oxide films. Tribocorrosion mechanisms under fretting, sliding and erosion conditions, respectively, are then discussed. Part two focuses on methods for measuring and preventing tribocorrosion. It includes chapters on electrochemical techniques, the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems. Part three presents a selection of tribocorrosion problems in engineering and medicine. Three chapters address the tribocorrosion of medical implants including test methods and clinical implications. Other chapters examine tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits, elevated-temperature metal working and chemical–mechanical polishing.With its distinguished editors and international team of expert contributors Tribocorrosion of passive metals and coatings is an invaluable reference tool for engineers and researchers in industry and academia confronted with tribocorrosion problems. - Comprehensively reviews current research on the tribocorrosion of passive metals and coatings, with particular reference to the design of tribocorrosion test equipment, data evaluation and the optimisation of materials' properties for tribocorrosion systems - Chapters discuss tribocorrosion mechanisms under fretting, sliding and erosion conditions before focussing on methods for measuring and preventing tribocorrosion - Includes a comprehensive selection of tribocorrosion problems in engineering and medicine, such as the tribocorrosion of medical implants, and tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits and elevated-temperature metal working

Download or read book Fatigue of Materials written by Subra Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.

Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

Download or read book Fretting Wear Fretting Fatigue and Damping of Structures written by Toshio Hattori and published by Springer Nature. This book was released on 2023-12-26 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the mechanical distinctions between fretting damage under axial or bending external forces and fretting damage under a torsional load. It emphasizes the importance of studying practical accident cases to efficiently acquire technical skills. The book is structured around the fundamental technologies of material science, tribology, and mechanics, which are vital for understanding and addressing technical issues. The author has incorporated all fretting countermeasure technologies, which were previously often sensory and empirical in nature, and repositioned them as technologies grounded in fundamental principles. The book proposes an economical approach to product operation that maintains reliability by integrating not only design technology but also maintenance practices. It delves into specific materials, such as titanium alloys and aluminum alloys, which have seen increased use for weight reduction in industries like aerospace. In this book, “Critical Distance Stress Theory” that can easily derive the fatigue limit and fatigue life of the stress singular field at the contact edge was presented. As a result, the fretting fatigue strength and life can be predicted from the same FEM stress analysis as the normal stress concentration part. And finally, introducing a novel fretting mechanical model, the book focuses on scenarios where pressure force (N) and repeated tangential force (F) are applied to two planar objects, with the tangential force being transmitted solely through friction at the contact surface. This model finds relevance in turbine blade connection structures, among other applications. The author references Asai's research example, which encompasses fretting mechanical analysis, fretting wear evaluation, fatigue assessment, and structural damping evaluation using this model.

Download or read book Proceedings of the 7th International Conference on Fracture Fatigue and Wear written by Magd Abdel Wahab and published by Springer. This book was released on 2018-07-14 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather a selection of peer-reviewed papers presented at the 7th International Conference on Fracture Fatigue and Wear (FFW 2018), held at Ghent University, Belgium on 9–10 July 2018. The contributions, prepared by international scientists and engineers, cover the latest advances in and innovative applications of fracture mechanics, fatigue of materials, tribology and wear of materials. The book is intended for academics, including graduate students and researchers, as well as industrial practitioners working in the areas of fracture fatigue and wear.

Download or read book High Cycle Fatigue written by Theodore Nicholas and published by Elsevier. This book was released on 2006-07-07 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr Theodore Nicholas ran the High Cycle Fatigue Program for the US Air Force between 1995 and 2003 at Wright-Patterson Air Force Base, and is one of the world's leading authorities on the subject, having authored over 250 papers in leading archival journals and books. Bringing his plethora of expertise to this book, Dr Nicholas discusses the subject of high cycle fatigue (HCF) from an engineering viewpoint in response to a series of HCF failures in the USAF and the concurrent realization that HCF failures in general were taking place universally in both civilian and military engines. Topic covered include: - Constant life diagrams - Fatigue limits under combined LCF and HCF - Notch fatigue under HCF conditions - Foreign object damage (FOD) - Brings years of the Author's US Air Force experience in high cycle fatigue together in one text - Discusses HCF in the context of recent international military and civilian engine failures

Download or read book Metals for Biomedical Devices written by Mitsuo Niinomi and published by Elsevier. This book was released on 2010-03-31 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite recent advances in medical devices using other materials, metallic implants are still one of the most commercially significant sectors of the industry. Given the widespread use of metals in medical devices, it is vital that the fundamentals and behaviour of this material are understood. Metals in biomedical devices reviews the latest techniques in metal processing methods and the behaviour of this important material.Initial chapters review the current status and selection of metals for biomedical devices. Chapters in part two discuss the mechanical behaviour, degradation and testing of metals with specific chapters on corrosion, wear testing and biocompatibility of biomaterials. Part three covers the processing of metals for biomedical applications with chapters on such topics as forging metals and alloys, surface treatment, coatings and sterilisation. Chapters in the final section discuss clinical applications of metals such as cardiovascular, orthopaedic and new generation biomaterials.With its distinguished editor and team of expert contributors, Metals for biomedical devices is a standard reference for materials scientists, researchers and engineers working in the medical devices industry and academia. - Reviews the latest techniques in metal processing methods including surface treatment and sterilisation - Examines metal selection for biomedical devices considering biocompatibility of various metals - Assesses mechanical behaviour and testing of metals featuring corrosion, fatigue and wear

Download or read book Continuum Damage Mechanics Theory and Application written by Dusan Krajcinovic and published by Springer. This book was released on 2014-05-04 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Teaching Essay on Residual Stresses and Eigenstrains written by Alexander M. Korsunsky and published by Butterworth-Heinemann. This book was released on 2017-06-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are an important subject in materials science and engineering that has implications across disciplines, from quantum dots to human teeth, from aeroengines to automotive surface finishing. Although a number of monographs exist, no resource is available in the form of a book to serve as a good basis for teaching the fundamentals. A Teaching Essay on Residual Stresses and Eigenstrains introduces eigenstrain methods as a powerful unified approach to residual stress modeling, measurement, and management. Starting with simple residual stress states, the key relationships are elucidated between deformation processes, inelastic strains (eigenstrains) these may introduce, and the resulting residual stress states. This book is written not only for the materials scientist, mechanical engineer, and student seeking to appreciate the origins of residual stress, but also for the more mature researcher and industrial engineer looking to improve their understanding of the eigenstrain approach to describing residual stress. - Provides a unified basis for understanding the fundamentals of residual stress origins and consequences - Introduces a classification of the most important residual stress states and their efficient description, as well as discussing measurement approaches, their limitations, and uses - Approaches the nature and application of eigenstrain methods in a systematic way to describe residual stress fields