Download or read book Precision Temperature Sensors in CMOS Technology written by Micheal A.P. Pertijs and published by Springer Science & Business Media. This book was released on 2006-12-06 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the analysis and design of precision temperature sensors in CMOS IC technology, focusing on so-called smart temperature sensors, which provide a digital output signal that can be readily interpreted by a computer. The text shows how temperature characteristics can be used to obtain an accurate digital temperature reading. The book ends with a detailed description of three prototypes, one of which achieves the best performance reported to date.
Download or read book Precision Temperature Sensors in CMOS Technology written by Michiel Pertijs and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Accuracy CMOS Smart Temperature Sensors written by Anton Bakker and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the theory and design of high-accuracy CMOS smart temperature sensors. The major topic of the work is the realization of a smart temperature sensor that has an accuracy that is so high that it can be applied without any form of calibration. Integrated in a low-cost CMOS technology, this yields at the publication date of this book one of the most inexpensive intelligent general purpose temperature sensors in the world. The first thermometers could only be read by the human eye. The industrial revolution and the following computerization asked for more intelligent sensors, which could easily communicate to digital computers. This led to· the development of integrated temperature sensors that combine a bipolar temperature sensor and an A-to-D converter on the same chip. The implementation in CMOS technology reduces the processing costs to a minimum while having the best-suited technology to increase the (digital) intelligence. The accuracy of conventional CMOS smart temperature sensors is degraded by the offset of the read-out electronics. Calibration of these errors is quite expensive, however, dynamic offset-cancellation techniques can reduce the offset of amplifiers by a factor 100 to 1000 and do not need trimming. Chapter two gives an elaborate description of the different kinds of dynamic offset-cancellation techniques. Also a new technique is introduced called the nested chopper technique. An implementation of a CMOS nested-chopper instrumentation amplifier shows a residual offset of less than lOOn V, which is the best result reported to date.
Download or read book Resistor based Temperature Sensors in CMOS Technology written by Sining Pan and published by Springer Nature. This book was released on 2022-04-04 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the background, principles, implementations, characterization, and future trends of temperature sensors made from silicon resistors in CMOS technology, including their readout circuits. Readers will benefit from the latest research of CMOS temperature sensors, and could learn about various precision analog techniques such as phase detection, continuous-time ΔΣ ADC, zoom ADC, FIR-DAC, dynamic element matching, OTA linearization, etc.
Download or read book Energy Efficient Smart Temperature Sensors in CMOS Technology written by Kamran Souri and published by Springer. This book was released on 2017-10-05 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design and implementation of energy-efficient smart (digital output) temperature sensors in CMOS technology. To accomplish this, a new readout topology, namely the zoom-ADC, is presented. It combines a coarse SAR-ADC with a fine Sigma-Delta (SD) ADC. The digital result obtained from the coarse ADC is used to set the reference levels of the SD-ADC, thereby zooming its full-scale range into a small region around the input signal. This technique considerably reduces the SD-ADC’s full-scale range, and notably relaxes the number of clock cycles needed for a given resolution, as well as the DC-gain and swing of the loop-filter. Both conversion time and power-efficiency can be improved, which results in a substantial improvement in energy-efficiency. Two BJT-based sensor prototypes based on 1st-order and 2nd-order zoom-ADCs are presented. They both achieve inaccuracies of less than ±0.2°C over the military temperature range (-55°C to 125°C). A prototype capable of sensing temperatures up to 200°C is also presented. As an alternative to BJTs, sensors based on dynamic threshold MOSTs (DTMOSTs) are also presented. It is shown that DTMOSTs are capable of achieving low inaccuracy (±0.4°C over the military temperature range) as well as sub-1V operation, making them well suited for use in modern CMOS processes.
Download or read book Thermal Sensors written by Gerard C. M. Meijer and published by CRC Press. This book was released on 1994-10-27 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Sensors is intended as a comprehensive and accessible reference for designers and users of thermal sensors. Many different physical quantities can be converted easily and accurately into temperature differences using thermal techniques. These temperature differences can be detected with temperature and temperature-difference sensors. In a thermal sensor the thermal converter and the temperature sensor are combined in a single accurate device. This book gives an overview and deals with the design aspects of thermal and temperature sensors, with an emphasis on sensors based on silicon technology. The temperature sensors described are based on the use of various types of sensitive elements, such as platinum resistors, thermistors and special integrated circuits. The thermal sensors described include flow, conductivity, infrared, vacuum, humidity and calorimetric sensors, and ac-dc converters, thus providing a comprehensive overview of all thermal sensors, with practical examples of each type.
Download or read book 2017 International Conference on Computer Systems Electronics and Control ICCSEC written by IEEE Staff and published by . This book was released on 2017-12-25 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ICCSEC 2017 provides a forum for researchers and practitioners involved in different but related domains to confront research results and discuss key problems The scope of ICCSEC 2017 includes the research and development fields of collaboration technologies and their applications to Computer Systems, Electronics and Control in industries and societies Application domains include, but are not limited to, computer systems, electronics, energy, transportation, communication, network, and many others Prospective authors are invited to submit high quality original research and technical contributions for presentations and posters in conference
Download or read book 3D and Circuit Integration of MEMS written by Masayoshi Esashi and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D and Circuit Integration of MEMS Explore heterogeneous circuit integration and the packaging needed for practical applications of microsystems MEMS and system integration are important building blocks for the “More-Than-Moore” paradigm described in the International Technology Roadmap for Semiconductors. And, in 3D and Circuit Integration of MEMS, distinguished editor Dr. Masayoshi Esashi delivers a comprehensive and systematic exploration of the technologies for microsystem packaging and heterogeneous integration. The book focuses on the silicon MEMS that have been used extensively and the technologies surrounding system integration. You’ll learn about topics as varied as bulk micromachining, surface micromachining, CMOS-MEMS, wafer interconnection, wafer bonding, and sealing. Highly relevant for researchers involved in microsystem technologies, the book is also ideal for anyone working in the microsystems industry. It demonstrates the key technologies that will assist researchers and professionals deal with current and future application bottlenecks. Readers will also benefit from the inclusion of: A thorough introduction to enhanced bulk micromachining on MIS process, including pressure sensor fabrication and the extension of MIS process for various advanced MEMS devices An exploration of epitaxial poly Si surface micromachining, including process condition of epi-poly Si, and MEMS devices using epi-poly Si Practical discussions of Poly SiGe surface micromachining, including SiGe deposition and LP CVD polycrystalline SiGe A concise treatment of heterogeneously integrated aluminum nitride MEMS resonators and filters Perfect for materials scientists, electronics engineers, and electrical and mechanical engineers, 3D and Circuit Integration of MEMS will also earn a place in the libraries of semiconductor physicists seeking a one-stop reference for circuit integration and the practical application of microsystems.
Download or read book Mobility based Time References for Wireless Sensor Networks written by Fabio Sebastiano and published by Springer Science & Business Media. This book was released on 2012-08-09 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the use of low-power low-cost and extremely small radios to provide essential time reference for wireless sensor networks. The authors explain how to integrate such radios in a standard CMOS process to reduce both cost and size, while focusing on the challenge of designing a fully integrated time reference for such radios. To enable the integration of the time reference, system techniques are proposed and analyzed, several kinds of integrated time references are reviewed, and mobility-based references are identified as viable candidates to provide the required accuracy at low-power consumption. Practical implementations of a mobility-based oscillator and a temperature sensor are also presented, which demonstrate the required accuracy over a wide temperature range, while drawing 51-uW from a 1.2-V supply in a 65-nm CMOS process.
Download or read book High accuracy CMOS Smart Temperature Sensors written by Anthonius Bakker and published by . This book was released on 2000 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of CMOS MEMS NEMS Devices written by Jaume Verd and published by MDPI. This book was released on 2019-06-25 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and nano-electro-mechanical system (M/NEMS) devices constitute key technological building blocks to enable increased additional functionalities within Integrated Circuits (ICs) in the More-Than-Moore era, as described in the International Technology Roadmap for Semiconductors. The CMOS ICs and M/NEMS dies can be combined in the same package (SiP), or integrated within a single chip (SoC). In the SoC approach the M/NEMS devices are monolithically integrated together with CMOS circuitry allowing the development of compact and low-cost CMOS-M/NEMS devices for multiple applications (physical sensors, chemical sensors, biosensors, actuators, energy actuators, filters, mechanical relays, and others). On-chip CMOS electronics integration can overcome limitations related to the extremely low-level signals in sub-micrometer and nanometer scale electromechanical transducers enabling novel breakthrough applications. This Special Issue aims to gather high quality research contributions dealing with MEMS and NEMS devices monolithically integrated with CMOS, independently of the final application and fabrication approach adopted (MEMS-first, interleaved MEMS, MEMS-last or others).]
Download or read book Sensors Handbook written by Sabrie Soloman and published by McGraw Hill Professional. This book was released on 2009-08-05 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete, State-of-the-Art Coverage of Sensor Technologies and Applications Fully revised with the latest breakthroughs in integrated sensors and control systems, Sensors Handbook, Second Edition provides all of the information needed to select the optimum sensor for any type of application, including engineering, semiconductor manufacturing, medical, military, agricultural, geographical, and environmental implementations. This definitive volume discusses a wide array of sensors, including MEMS, nano, microfabricated, CMOS, smart, NIR, SpectRx(tm), remote-sensing, fiber-optic, light, ceramic, and silicon sensors. Several in-depth application examples from a variety of industries are included. The comprehensive details in this authoritative resource enable you to accurately verify the specifications for any required component. This is the most through, up-to-date reference on sensing technologies available.
Download or read book Essential Principles of Image Sensors written by Takao Kuroda and published by CRC Press. This book was released on 2017-12-19 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a succinct introduction to the systemization, noise sources, and signal processes of image sensor technology, Essential Principles of Image Sensors discusses image information and its four factors: space, light intensity, wavelength, and time. Featuring clarifying and insightful illustrations, this must-have text: Explains how image sensors convert optical image information into image signals Treats space, wavelength, and time as digitized built-in coordinate points in image sensors and systems Details the operational principles, pixel technology, and evolution of CCD, MOS, and CMOS sensors with updated technology Describes sampling theory, presenting unique figures demonstrating the importance of phase Explores causes for the decline of image information quality In a straightforward manner suitable for beginners and experts alike, Essential Principles of Image Sensors covers key topics related to digital imaging including semiconductor physics, component elements necessary for image sensors, silicon as a sensitive material, noises in sensors, and more.
Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.
Download or read book CMOS Cantilever Sensor Systems written by D. Lange and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for scientists and engineers in the field of micro- and nano electro-mechanical systems (MEMS and NEMS) and introduces the development of cantilever-based sensor systems using CMOS-compatible micromachining from the design concepts and simulations to the prototype. It is also a useful resource for researchers on cantilever sensors and resonant sensors in general The reader will become familiar with the potential of the combination of two technological approaches: IC fabrication technology, notably CMOS technology, and silicon micromachining and the resulting microstructures such as cantilever beams. It was recognized early that these two technologies should be merged in order to make the microstructures smart and devise integrated microsystems with on-chip driving and signal conditioning circuitry - now known as CMOS MEMS or, with the arrival of nanostructures, CMOS NEMS. One way to achieve the merger is the post-processing micro- or nano- machining of finished CMOS wafers, some of which is described in this book. The book introduces this approach based on work carried out at the Physical Electronics Laboratory of ETH Zurich on arrays of cantilever transducers with on-chip driving and signal conditioning circuitry. These cantilevers are familiar from Scanning Probe Microscopy (SPM) and allow the sensitive detection of phys ical quantities such as forces and mass changes. The book is divided into three parts. First, general aspects of cantilever resona tors are introduced, e. g. their resonant behavior and possible driving and sensing mechanisms.
Download or read book Smart Sensor Systems written by Gerard Meijer and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from an internationally-renowned group of experts, this book uses a multidisciplinary approach to review recent developments in the field of smart sensor systems, covering important system and design aspects. It examines topics over the whole range of sensor technology from the theory and constraints of basic elements, physics and electronics, up to the level of application-orientated issues. Developed as a complementary volume to ‘Smart Sensor Systems’ (Wiley 2008), which introduces the basics of smart sensor systems, this volume focuses on emerging sensing technologies and applications, including: State-of-the-art techniques for designing smart sensors and smart sensor systems, including measurement techniques at system level, such as dynamic error correction, calibration, self-calibration and trimming. Circuit design for sensor systems, such as the design of precision instrumentation amplifiers. Impedance sensors, and the associated measurement techniques and electronics, that measure electrical characteristics to derive physical and biomedical parameters, such as blood viscosity or growth of micro-organisms. Complete sensor systems-on-a-chip, such as CMOS optical imagers and microarrays for DNA detection, and the associated circuit and micro-fabrication techniques. Vibratory gyroscopes and the associated electronics, employing mechanical and electrical signal amplification to enable low-power angular-rate sensing. Implantable smart sensors for neural interfacing in bio-medical applications. Smart combinations of energy harvesters and energy-storage devices for autonomous wireless sensors. Smart Sensor Systems: Emerging Technologies and Applications will greatly benefit final-year undergraduate and postgraduate students in the areas of electrical, mechanical and chemical engineering, and physics. Professional engineers and researchers in the microelectronics industry, including microsystem developers, will also find this a thorough and useful volume.
Download or read book Technologies for Smart Sensors and Sensor Fusion written by Kevin Yallup and published by CRC Press. This book was released on 2017-12-19 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exciting new developments are enabling sensors to go beyond the realm of simple sensing of movement or capture of images to deliver information such as location in a built environment, the sense of touch, and the presence of chemicals. These sensors unlock the potential for smarter systems, allowing machines to interact with the world around them in more intelligent and sophisticated ways. Featuring contributions from authors working at the leading edge of sensor technology, Technologies for Smart Sensors and Sensor Fusion showcases the latest advancements in sensors with biotechnology, medical science, chemical detection, environmental monitoring, automotive, and industrial applications. This valuable reference describes the increasingly varied number of sensors that can be integrated into arrays, and examines the growing availability and computational power of communication devices that support the algorithms needed to reduce the raw sensor data from multiple sensors and convert it into the information needed by the sensor array to enable rapid transmission of the results to the required point. Using both SI and US units, the text: Provides a fundamental and analytical understanding of the underlying technology for smart sensors Discusses groundbreaking software and sensor systems as well as key issues surrounding sensor fusion Exemplifies the richness and diversity of development work in the world of smart sensors and sensor fusion Offering fresh insight into the sensors of the future, Technologies for Smart Sensors and Sensor Fusion not only exposes readers to trends but also inspires innovation in smart sensor and sensor system development.
