Download or read book Pre study Indicators on circular economy in the Nordic countries written by Bauer, Bjørn and published by Nordic Council of Ministers. This book was released on 2020-12-21 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: https://pub.norden.org/temanord2020-543/ A systematic and continuously measurement of the progress towards the circular economy can inform decision making and policies, and thus strengthen the circular transition. However, this pre-study, mapping circular economy indicators across the Nordic countries on both national and sub-national level, reveals that as of 2020, data streams and indicators are missing for the inner loops of the circular economy. A monitoring system embracing only selected aspects of the circular economy (where data is readily available) risks exaggerating the focus on these areas and downgrade the importance of other areas where data is unattainable, even though the latter may (in principle) be creating more circular value (such as prolonging products’ lifetimes).
Download or read book Survey of the emergence and use of naturally occurring materials written by Oberender, Anke and published by Nordic Council of Ministers. This book was released on 2021-09-10 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: https://pub.norden.org/temanord2021-535/ Naturally occurring materials, such as soil, mineral masses and rock masses from construction projects and infrastructure projects represent a high resource potential and potential for CO2-savings if used more efficiently. Large amounts of these materials are managed on an annual basis in the Nordic countries, but to enable a more resource efficient management of naturally occurring materials, several regulatory as well as practical challenges must be solved. Existing legislation in the Nordic countries is not a direct barrier that prevents optimal utilization of resources, but there are several untapped opportunities in regulation as well as problem areas that appear as barriers in practice. Efficient utilization of naturally occurring materials in the Nordic countries faces also a wide range of challenges in practice and from different angles.
Download or read book Pre study written by Bjørn Bauer and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Nordic regulatory framework and its effect on waste prevention and recycling in the region written by Papineschi, Joe and published by Nordic Council of Ministers. This book was released on 2019-04-23 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: At an important time in Nordic Waste Policy, as the 2018 Circular Economy Package makes significant updates to key European Union directives, this work looks back at the Nordic regulatory framework for waste from the 1970s and its effect upon waste prevention and recycling.At an important time in Nordic Waste Policy, as the 2018 Circular Economy Package makes significant updates to key European Union directives, this work looks back at the Nordic regulatory framework for waste from the 1970s and its effect upon waste prevention and recycling.
Download or read book Sustainable Development Action the Nordic Way written by Halonen, Mikko and published by Nordic Council of Ministers. This book was released on 2017-05-04 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2030 Agenda, adopted by the UN General Assembly in September 2015, outlines an ambitious and universal plan of action for people, planet and prosperity as it seeks to strengthen universal peace and freedom. This report presents national and Nordic action on Agenda 2030 with the aim to inform and support the Nordic Council of Ministers in formulating a new Nordic Sustainable Development Programme. All Nordic countries are engaged and strongly committed to implementing Agenda 2030 and there is a broad societal interest in joint Nordic action. The existing Nordic Strategy for Sustainable Development and several other key initiatives within Nordic cooperation already contribute to the goals of Agenda 2030. A new Nordic Sustainable Development Programme can build upon a strong foundation and add further value to the national and international work done by the Nordic countries.
Download or read book Nordic Best Practices written by Marika Bröckl and published by Nordic Council of Ministers. This book was released on 2016 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The working group on Sustainable Consumption and Production, under the Nordic Council of Ministers requested consultants from Gaia to identify, write out and publish best practice cases of sustainable consumption and production on the UNEP SCP Clearinghouse. This report presents nineteen initiatives that cover two particular themes: 1) Sustainable Lifestyles and Education and 2) Sustainable Public Procurement. The cases have also been added into the UNEP's 10 Year Frame-work Program (10YFP) information platform, the SCP Clearinghouse which is a concrete result of Rio+20. The objective is to enhance international cooperation in order to accelerate a shift towards sustainable consumption and production in developed and developing countries. The SCP Clearinghouse is a web-based information sharing tool, which can be used by different actors as an inspiration for advancing SCP worldwide.
Download or read book Regeneration of the Built Environment from a Circular Economy Perspective written by Stefano Della Torre and published by Springer Nature. This book was released on 2019-12-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the strategic importance and advantages of adopting multidisciplinary and multiscalar approaches of inquiry and intervention with respect to the built environment, based on principles of sustainability and circular economy strategies. A series of key challenges are considered in depth from a multidisciplinary perspective, spanning engineering, architecture, and regional and urban economics. These challenges include strategies to relaunch socioeconomic development through regenerative processes, the regeneration of urban spaces from the perspective of resilience, the development and deployment of innovative products and processes in the construction sector in order to comply more fully with the principles of sustainability and circularity, and the development of multiscale approaches to enhance the performance of both the existing building stock and new buildings. The book offers a rich selection of conceptual, empirical, methodological, technical, and case study/project-based research. It will be of value for all who have an interest in regeneration of the built environment from a circular economy perspective.
Download or read book Circular Economy in the Construction Industry written by Sadhan Kumar Ghosh and published by CRC Press. This book was released on 2021-12-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular Economy in the Construction Industry is an invaluable resource for researchers, policymakers, implementers and PhD and Masters-level students in universities analyzing the present status of Construction and Demolition Wastes (C&DW) management, materials development utilizing slag, fly ash, HDPE fibre, geo-wastes, and other wastes, green concrete, soil stabilization, resource circulation in construction sectors, success in experimentation & commercial production, future needs, and future research areas. While huge C&DW is wasted by dumping, there is potential of recycling preventing greenhouse gas (GHG) emissions and environmental pollution as well as creating business opportunities. Circularity of resources in the construction industry can contribute to a more secure, sustainable, and economically sound future through proper policy instruments, management systems, and recycling by selecting the following: Supply chain sustainability and collection of C&D Wastes, Appropriate separation and recycling technology, Enforcement of policy instruments, Productivity, quality control of recycled products and intended end use, Economic feasibility as business case, commercialization, generating employment. This book addresses most of the above issues in a lucid manner by experts in the field from different countries, which are helpful for the related stakeholders, edited by experts in the field.
Download or read book The Circular Economy in Europe written by Roger Strand and published by . This book was released on 2019-12-12 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Circular Economy in Europe presents an overview and a critical discussion on how circularity is conceived, imagined and enacted in current EU policy-making. In 2013, the idea of a circular economy entered the stage of European policy-making in the efforts to reconcile environmental and economic policy objectives. In 2019 the European Commission declared in a press release that the Circular Economy Action Plan has been delivered. The level of circularity in the European economy, however, has remained the same. Bringing together perspectives from social sciences, environmental economics and policy analysis, The Circular Economy in Europe provides a critical analysis of policies and promises of the next panacea for growth and sustainability. The authors provide a theoretical and empirical basis to discuss how contemporary societies conceive their need to re-organise production and consumption and explores the messy assemblage of institutions, actors, waste streams, biophysical flows, policy objectives, scientific disciplines, values, expectations, promises and aspirations involved. This book is essential reading for all those interested in understanding how ideas about the circular economy emerged historically, how they gained traction and are used in policy processes, and what the practical challenges in implementing this policy are"--
Download or read book State of the Nordic Region 2020 written by Jokinen, Johanna and published by Nordic Council of Ministers. This book was released on 2020-02-03 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: https://pub.norden.org/nord2020-001/ Abstract [en] State of the Nordic Region 2020 gives you a unique look behind the scenes of the world’s most integrated region, comprised of Denmark, Finland, Iceland, Norway and Sweden, along with the Faroe Islands, Greenland and Åland. The report presents a series of facts and figures showing the current state of play within core socioeconomic sectors, including demography, labour market and economy. In addition, you can read about wellbeing and energy pathways towards a carbon neutral Nordic Region. State of the Nordic Region 2020 is published by the Nordic Council of Ministers and produced by Nordregio, an international research center for regional development and planning established by the Nordic Council of Ministers.
Download or read book Economic Policy Instruments for Plastic Waste written by Magnus Hennlock and published by Nordic Council of Ministers. This book was released on 2015-03-18 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieving a high quality of waste plastic materials and recycling processes is a key challenge in closing the resource loops for plastics. This report reviews the status and trends for plastic waste flows and treatment in Denmark, Finland, Norway and Sweden. Furthermore, it gives an overview of existing policy instruments and the main challenges for designing policy instruments for improved recycling of plastic waste in these Nordic countries. The report identifies potential market failures associated with closing the resource loops for plastics. It reviews the economics research literature on policy instrument design for achieving optimal recycling rates and makes policy recommendations from the Nordic perspective. Finally, it presents results from a survey on market conditions to managers in the recycling and plastic manufacturing industry in Sweden.
Download or read book Circular Economy Global Perspective written by Sadhan Kumar Ghosh and published by Springer Nature. This book was released on 2019-11-01 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: A circular economy is an alternative to a traditional linear economy (make, use, dispose) in which we keep resources in use for as long as possible, extract the maximum value from them whilst in use, then recover and regenerate products and materials at the end of each service life. Circular economy (CE) is important towards sustainable development, resources circulation and conservation, involving closing of material loops and cascading used resources, to prevent waste occurrence, and transforming the resulting residual streams into new (secondary) resources. Strategies and legislative framework for waste management are important steps for development of a more CE where resource efficiency becomes the key driver for both economic growth and environmental protections. A few countries achieved good results implementing CE as a replacement of the linear economy. Resource managers and planners should thoroughly identify factors to implement CE for societal benefits. This book presents how resource consumption is minimized with rational use based on 3Rs, legislative framework and government supports towards implementing CE initiatives, example of best practices, future plans and targets in different countries those are helpful for researchers, planners and implementers.
Download or read book Circular Economy in Textiles and Apparel written by Subramanian Senthilkannan Muthu and published by Woodhead Publishing. This book was released on 2018-11-05 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular Economy in Textiles and Apparel: Processing, Manufacturing, and Design is the first book to provide guidance on this subject, presenting the tools for implementing this paradigm and their impact on textile production methods. Sustainable business strategies are also covered, as are new design methods that can help in the reduction of waste. Drawing on contributions from leading experts in industry and academia, this book covers every aspect of this increasingly important subject and speculates on future developments. - Provides case studies on the circular economy in operation in the textiles industry - Identifies challenges to implementation and areas where more research is needed - Draws on both industrial innovation and academic research to explain an emerging topic with the potential to entirely change the way we make and use clothing
Download or read book Circular Economy and Sustainability written by Alexandros Stefanakis and published by Elsevier. This book was released on 2021-09-14 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of circular economy is based on strategies, practices, policies, and technologies to achieve principles related to reusing, recycling, redesigning, repurposing, remanufacturing, refurbishing, and recovering water, waste materials, and nutrients to preserve natural resources. It provides the necessary conditions to encourage economic and social actors to adopt strategies toward sustainability. However, the increasing complexity of sustainability aspects means that traditional engineering and management/economics alone cannot face the new challenes and reach the appropriate solutions. Thus, this book highlights the role of engineering and management in building a sustainable society by developing a circular economy that establishes and protects strong social and cultural structures based on cross-disciplinary knowledge and diverse skills. It includes theoretical justification, research studies, and case studies to provide researchers, practitioners, professionals, and policymakers the appropriate context to work together in promoting sustainability and circular economy thinking. Volume 1, Circular Economy and Sustainability: Management and Policy, discusses the content of circular economy principles and how they can be realized in the fields of economy, management, and policy. It gives an outline of the current status and perception of circular economy at the micro-, meso-, and macro-levels to provide a better understanding of its role to achieve sustainability. Volume 2, Circular Economy and Sustainability: Environmental Engineering, presents various technological and developmental tolls that emphasize the implementation of these principles in practice (micro-level). It demonstrates the necessity to establish a fundamental connection between sustainable engineering and circular economy. - Presents a novel approach linking circular economy concept to environmental engineering and management to promote sustainability goals in modern societies - Approaches the topic of production and consumption at both the micro- and macro-levels, integrating principles with practice - Offers a range of theoretical and foundational knowledge in addition to case studies that demonstrate the potential impact of circular economy principles on economic and societal progress
Download or read book Advances in Production Management Systems Production Management Systems for Volatile Uncertain Complex and Ambiguous Environments written by Matthias Thürer and published by Springer Nature. This book was released on with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Circular Public Procurement in the Nordic Countries written by Alhola, Katriina and published by Nordic Council of Ministers. This book was released on 2017-05-04 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides a framework for circular procurement and discusses its possibilities to promote circular economy. Several best practice examples in Denmark, Finland, Sweden and Norway illustrate how and in which sectors and product groups circular procurement could be applicable. Different approaches to circular procurement and tendering criteria supporting circular aspects are also illustrated.The study was carried out in Nordic co-operation by Finnish Environment Institute, IVL Swedish Environmental Research Institute and Copenhagen Resource Institute. The project was financed by the Nordic Council of Ministers (NCM), administrated by the NCM Sustainable Consumption and Production Working Group and guided by a steering group consisting representatives from Denmark, Finland, Iceland, Norway and Sweden.
Download or read book Repair Do It Yourself and Circular Economy written by Michael Jonas and published by Springer Nature. This book was released on 2023-07-15 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Repair & Do-It-Yourself activities on the one hand and discussions about the circular economy on the other hand are currently regarded as promising examples of how current modes of consumption and production can be reorganized and redesigned in the sense of a sustainable society. This volume discusses the relevance, the interactions as well as the possibilities and limits of the aforementioned phenomena of repairing, do-it-yourself and longer use on the one hand and the circular economy on the other, from both a scientific and a practical perspective.
