Download or read book Steel Metallurgy written by S. K. Mandal and published by McGraw Hill Professional. This book was released on 2015-01-22 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated resource covers the characteristics, properties, specifications, heat treatment, and application of steels for engineering students, non-metallurgical engineers, and technicians. There’s a saying that “steel makes the world.” From a tiny pin in a sewing kit to home appliances to cars to bridges, steel is everywhere. While there are numerous books on steel, few, if any, address the true application of steels in a practical manner. This book was written to fill that gap. Divided into four parts, Steel Metallurgy: Properties, Specifications, and Applications covers the basic metallurgical facts and characteristics, properties, standards, and grades of steel. Classifications of steel based on standards and structural engineering are then discussed, followed by heat treatment and welding of steels. The book then focuses on the application of steel and its reliability and failures, and shows, through numerous illustrations and case studies, how it’s processed and used for various purposes. Armed with the information in this book, metallurgical and engineering students will become truly “industry ready.” Case studies and illustrations show steel being used in practical, everyday applications, making the book user friendly yet comprehensive Lays the ground work for steel selection, and discusses the methods of selection Contains appendices with steel grades, compositions, and standards; physical data and conversions; temperature, hardness, and work/energy conversion tables Includes a glossary of important metallurgical terms
Download or read book Steel Metallurgy for the Non Metallurgist written by John D. Verhoeven and published by ASM International. This book was released on 2007-01-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the metallurgy of steel and its heat treatment for non-metallurgists. It starts from simple concepts--beginning at the level of high-school chemistry classes--and building to more complex concepts involved in heat treatment of most all types of steel as well as cast iron. It was inspired by the author when working with practicing bladesmiths for more than 15 years. Most chapters in the book contain a summary at the end. These summaries provide a short review of the contents of each chapter. This book is THE practical primer on steel metallurgy for those who heat, forge, or machine steel.
Download or read book Powder Metallurgy of Iron and Steel written by Randall M. German and published by Wiley-Interscience. This book was released on 1998-03-31 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to current practices Powder metallurgy processes increasingly dominate the production of iron and steel components for a variety of machines, appliances, automobiles, and tools. These processes yield high-quality precision components, recycle scrap metals into useful powders, and consume less energy than traditional manufacturing methods. Despite the tremendous growth in this area, however, until now there has been no guide on practical issues in the field. Powder Metallurgy of Iron and Steel fills the need for a fundamental, nonmathematical treatment of this technology. Focusing on the most useful applications and the advantages of different production techniques, this systematic, self-contained volume provides serious help in tackling production problems on the factory floor. It covers the gamut of practical topics, from injection molding and compaction processes to sintering, full-density processes, heat treatments, finishing operations, and the mechanical properties of many products, including die-compacted steels. Written by a leading authority and designer of educational programs for the industry, Powder Metallurgy of Iron and Steel: Emphasizes current practices and real engineering materials in everyday manufacturing processes Keeps the mathematics simple, boxing the calculations outside the main body of text Includes research articles and trade information from a variety of sources Features numerous pictures and flow diagrams Includes an appendix with an extensive list of definitions This important tutorial for an expanding work force is accessible to scientists and engineers alike, as well as technicians, production supervisors, designers, consultants, and marketing personnel. It is also an excellent textbook for undergraduate and industrial courses.
Download or read book Metallurgy for the Non Metallurgist Second Edition written by Arthur C. Reardon and published by ASM International. This book was released on 2011-01-01 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author's previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. - Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants - Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book - Reviews extraction of multiple metals from the same tropical or arctic ore - Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources
Download or read book Metals and How To Weld Them written by Theodore Brewster Jefferson and published by Colchis Books. This book was released on with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals and How To Weld Them is an indispensable guide for anyone venturing into the world of welding. Whether you’re a novice or an experienced welder, this comprehensive book covers the fundamentals of metallurgy, welding techniques, and safety precautions. From joining metals to understanding their properties, the authors’ expertise shines through, making this a must-read for metalworkers and enthusiasts alike.
Download or read book Metallurgy Fundamentals written by Daniel A. Brandt and published by Goodheart-Wilcox Publisher. This book was released on 1999 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised and expanded edition of Metallurgy Fundamentals provides the student with instruction on the basic properties, characteristics, and production of the major metal families. Clear, concise language and numerous illustrations make this an easy-to-understand text for an introductory course in metallurgy. Over 450 tables, diagrams, and photographs show both the theoretical and practical aspects of metallurgy.
Download or read book Corrosion of Metals written by Helmut Kaesche and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion due to water is one of the most significant and complex causes of damage to metallic products. Written from the viewpoint of physical chemistry, this authoritative and established text deals with the aqueous corrosion of metals. Available for the first time in English, Corrosion of Metal addressing engineers, metallurgists, physicists and chemists. This self-contained, valuable reference comprehensively organizes and makes readily accessible the accumulated wealth of fundamental and applied knowledge. The concentration is on the underlying essentials of corrosion and failure, and the material is consistently presented in relation to practical applications to corrosion protection. The first chapters introducing the physicochemical principles are ideal for students. The following chapters provide an overview of the state of research for those familiar with the fundamentals. An exhaustive bibliography and appendices conclude the volume.
Download or read book PRACTICAL HEAT TREATING written by JON L. DOSSETT and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Metal Forming written by Taylan Altan and published by ASM International(OH). This book was released on 1983 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Briefly reviews the basic principles of metal forming but major emphasis is on the latest developments in the design of metal-forming operations and tooling. Discusses the position of metal forming in manufacturing and considers a metal-forming process as a system consisting of several interacting variables. Includes an overall review and classification of all metal-forming processes. The fundamentals of plastic deformation - metal flow, flow stress of metals and yield criteria - are discussed, as are significant practical variables of metal- forming processes such as friction, temperatures and forming machines and their characteristics. Examines approximate methods of analyzing simple forming operations, then looks at massive forming processes such as closed-die forging, hot extrusion, cold forging/ extrusion, rolling and drawing (discussion includes the prediction of stresses and load in each process and applications of computer-aided techniques). Recent developments in metal-forming technology, including CAD/CAM for die design and manufacture, are discussed, and a review of the latest trends in metal flow analysis and simulations.
Download or read book Modern Physical Metallurgy written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.
Download or read book The Practical Metal worker s Assistant written by Oliver Byrne and published by . This book was released on 1864 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book An Introduction to Metallurgy written by Alan Cottrell and published by . This book was released on 1967 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iron and Steel Production written by K. Bugayev and published by The Minerva Group, Inc.. This book was released on 2001 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides basic information covering every aspect of iron and steel production and was originally a textbook for Soviet vocational schools, as well as a practical aid for workers engaged in the field.
Download or read book Knife Engineering written by Larrin Thomas and published by . This book was released on 2020-07-16 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth exploration of the effects of different steels, heat treatments, and edge geometries on knife performance. This book provides ratings for toughness, edge retention, and corrosion resistance for all of the popular knife steels. Micrographs of over 50 steels. Specific recommended heat treatments for each steel. And answers to questions like: 1) Does a thinner or thicker edge last longer? 2) What heat treatment leads to the best performance? 3) Are there performance benefits to forging blades? 4) Should I use stainless or carbon steel? All of these questions and more are answered by a metallurgist who grew up around the knife industry.
