Download or read book Practical Industrial Safety Risk Assessment and Shutdown Systems written by Dave Macdonald and published by Elsevier. This book was released on 2003-11-25 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for engineers that covers the hardware and software aspects of high-reliability safety systems, safety instrumentation and shutdown systems as well as risk assessment techniques and the wider spectrum of industrial safety. Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering. This highly practical book focuses on efficiently implementing and assessing hazard studies, designing and applying international safety practices and techniques, and ensuring high reliability in the safety and emergency shutdown of systems in your plant.This book will provide the reader with the most up-to-date standards for and information on each stage of the safety life cycle from the initial evaluation of hazards through to the detailed engineering and maintenance of safety instrumented systems. It will help them develop the ability to plan hazard and risk assessment studies, then design and implement and operate the safety systems and maintain and evaluate them to ensure high reliability. Finally it will give the reader the knowledge to help prevent the massive devastation and destruction that can be caused by today's highly technical computer controlled industrial environments.* Helps readers develop the ability to plan hazard and risk assessment studies, then design, implement and operate the safety systems and maintain and evaluate them to ensure high reliability* Gives the reader the knowledge to help prevent the massive devastation that can be caused by today's highly technical computer controlled industrial environments* Rather than another book on the discipline of safety engineering, this is a thoroughly practical guide to the procedures and technology of safety in control and plant engineering

Download or read book Practical Industrial Data Communications written by Deon Reynders and published by Elsevier. This book was released on 2004-11-10 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to outline the best practice in designing, installing, commissioning and troubleshooting industrial data communications systems. In any given plant, factory or installation there are a myriad of different industrial communications standards used and the key to successful implementation is the degree to which the entire system integrates and works together. With so many different standards on the market today, the debate is not about what is the best - be it Foundation Fieldbus, Profibus, Devicenet or Industrial Ethernet but rather about selecting the most appropriate technologies and standards for a given application and then ensuring that best practice is followed in designing, installing and commissioning the data communications links to ensure they run fault-free. The industrial data communications systems in your plant underpin your entire operation. It is critical that you apply best practice in designing, installing and fixing any problems that may occur. This book distills all the tips and tricks with the benefit of many years of experience and gives the best proven practices to follow. The main steps in using today's communications technologies involve selecting the correct technology and standards for your plant based on your requirements; doing the design of the overall system; installing the cabling and then commissioning the system. Fiber Optic cabling is generally accepted as the best approach for physical communications but there are obviously areas where you will be forced to use copper wiring and, indeed, wireless communications. This book outlines the critical rules followed in installing the data communications physical transport media and then ensuring that the installation will be trouble-free for years to come. The important point to make is that with today's wide range of protocols available, you only need to know how to select, install and maintain them in the most cost-effective manner for your plant or factory - knowledge of the minute details of the protocols is not necessary. - An engineer's guide to communications systems using fiber optic cabling, copper cabling and wireless technology - Covers: selection of technology and standards - system design - installation of equipment and cabling - commissioning and maintenance - Crammed with practical techniques and know how - written by engineers for engineers

Download or read book Recent Developments on Industrial Control Systems Resilience written by Emil Pricop and published by Springer Nature. This book was released on 2019-10-05 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides profound insights into industrial control system resilience, exploring fundamental and advanced topics and including practical examples and scenarios to support the theoretical approaches. It examines issues related to the safe operation of control systems, risk analysis and assessment, use of attack graphs to evaluate the resiliency of control systems, preventive maintenance, and malware detection and analysis. The book also discusses sensor networks and Internet of Things devices. Moreover, it covers timely responses to malicious attacks and hazardous situations, helping readers select the best approaches to handle such unwanted situations. The book is essential reading for engineers, researchers, and specialists addressing security and safety issues related to the implementation of modern industrial control systems. It is also a valuable resource for students interested in this area.

Download or read book Industrial Safety Management written by J Maiti and published by Springer. This book was released on 2017-10-30 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume focuses on research conducted in the areas of industrial safety. Chapters are extensions of works presented at the International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems. The book addresses issues such as occupational safety, safety by design, safety analytics and safety management. It is a useful resource for students, researchers, industrial professionals and engineers.

Download or read book Practical Hydraulic Systems Operation and Troubleshooting for Engineers and Technicians written by Ravi Doddannavar and published by Elsevier. This book was released on 2005-02-07 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whatever your hydraulic applications, Practical Hydraulic Systems: Operation & Troubleshooting For Engineers & Technicians will help you to increase your knowledge of the fundamentals, improve your maintenance programs and become an excellent troubleshooter of problems in this area. Cutaways of all major components are included in the book to visually demonstrate the components' construction and operation. Developing an understanding of how it works leads to an understanding of how and why it fails. Multimedia views of the equipment are shown, to give as realistic a view of hydraulic systems as possible. The book is highly practical, comprehensive and interactive. It discusses Hydraulic Systems construction, design applications, operations, maintenance, and management issues and provides you with the most up-to-date information and Best Practice in dealing with the subject.* A focus on maintenance and troubleshooting makes this book essential reading for practising engineers.* Written to cover the requirements of mechanical / industrial and civil engineering.* Cutaway diagrams demonstrate the construction and operation of key equipment.

Download or read book Practical Power System Protection written by Leslie Hewitson and published by Newnes. This book was released on 2005-02-28 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to increase understanding on a practical and theoretical basis, this invaluable resource provides engineers, plant operators, electricians and technicians with a thorough grounding in the principles and practicalities behind power system protection. Coverage of the fundamental knowledge needed to specify, use and maintain power protection systems is included, helping readers to increase plant efficiency, performance and safety. Consideration is also given to the practical techniques and engineering challenges encountered on a day-to-day basis, making this an essential resource for all.

Download or read book Practical Machinery Safety written by David Macdonald and published by Elsevier. This book was released on 2004-07-16 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Machinery Safety aims to provide you with the knowledge to tackle machinery safety control problems at a practical level whilst achieving compliance with national and international standards. The book highlights the major international standards that are used to support compliance with EU regulations and uses these standards as a basis for the design procedures. It looks at the risk assessment processes used to identify hazards and to quantify the risks inherent in a machine. It introduces the concepts of safety categories as defined by standard EN954-1 (Safety of Machinery) and illustrates the principles of failsafe design, fault tolerance and self-testing. It also provides an introduction to machinery protection devices such as guards, enclosures with interlocks and guard-monitoring relays, locking systems, safety mats, photo-electric and electro-sensitive principles and the application of light curtains, a study of Safety Control System techniques, and introduces the principles of safety-certified PLCs. - Plan and implement safety systems that deliver a safe working environment and compliance with national and international standards - Apply simple risk assessments and hazard design methods to your own projects - Identify hazards that occur with machinery and know how to deal with them

Download or read book Practical Batch Process Management written by Mike Barker and published by Elsevier. This book was released on 2004-11-18 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historically batch control systems were designed individually to match a specific arrangement of plant equipment. They lacked the ability to convert to new products without having to modify the control systems, and did not lend themselves to integration with manufacturing management systems. Practical Batch Management Systems explains how to utilize the building blocks and arrange the structures of modern batch management systems to produce flexible schemes suitable for automated batch management, with the capability to be reconfigured to use the same plant equipment in different combinations. It introduces current best practice in the automation of batch processes, including the drive for integration with MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) products from major IT vendors. References and examples are drawn from DCS / PLC batch control products currently on the market.- Implement modern batch management systems that are flexible and easily reconfigured - Integrate batch management with other manufacturing systems including MES and ERP - Increase productivity through industry best practice

Download or read book Practical Industrial Data Networks written by Steve Mackay and published by Elsevier. This book was released on 2004-02-27 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many data communications titles covering design, installation, etc, but almost none that specifically focus on industrial networks, which are an essential part of the day-to-day work of industrial control systems engineers, and the main focus of an increasingly large group of network specialists.The focus of this book makes it uniquely relevant to control engineers and network designers working in this area. The industrial application of networking is explored in terms of design, installation and troubleshooting, building the skills required to identify, prevent and fix common industrial data communications problems - both at the design stage and in the maintenance phase.The focus of this book is 'outside the box'. The emphasis goes beyond typical communications issues and theory to provide the necessary toolkit of knowledge to solve industrial communications problems covering RS-232, RS-485, Modbus, Fieldbus, DeviceNet, Ethernet and TCP/IP. The idea of the book is that in reading it you should be able to walk onto your plant, or facility, and troubleshoot and fix communications problems as quickly as possible. This book is the only title that addresses the nuts-and-bolts issues involved in design, installation and troubleshooting that are the day-to-day concern of engineers and network specialists working in industry.* Provides a unique focus on the industrial application of data networks * Emphasis goes beyond typical communications issues and theory to provide the necessary toolkit of knowledge to solve industrial communications problems* Provides the tools to allow engineers in various plants or facilities to troubleshoot and fix communications problems as quickly as possible

Download or read book Practical E Manufacturing and Supply Chain Management written by Gerhard Greeff and published by Elsevier. This book was released on 2004-08-11 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies are revolutionising the way manufacturing and supply chain management are implemented. These changes are delivering manufacturing firms the competitive advantage of a highly flexible and responsive supply chain and manufacturing system to ensure that they meet the high expectations of their customers, who, in today's economy, demand absolutely the best service, price, delivery time and product quality.To make e-manufacturing and supply chain technologies effective, integration is needed between various, often disparate systems. To understand why this is such an issue, one needs to understand what the different systems or system components do, their objectives, their specific focus areas and how they interact with other systems. It is also required to understand how these systems evolved to their current state, as the concepts used during the early development of systems and technology tend to remain in place throughout the life-cycle of the systems/technology. This book explores various standards, concepts and techniques used over the years to model systems and hierarchies in order to understand where they fit into the organization and supply chain. It looks at the specific system components and the ways in which they can be designed and graphically depicted for easy understanding by both information technology (IT) and non-IT personnel.Without a good implementation philosophy, very few systems add any real benefit to an organization, and for this reason the ways in which systems are implemented and installation projects managed are also explored and recommendations are made as to possible methods that have proven successful in the past. The human factor and how that impacts on system success are also addressed, as is the motivation for system investment and subsequent benefit measurement processes.Finally, the vendor/user supply/demand within the e-manufacturing domain is explored and a method is put forward that enables the reduction of vendor bias during the vendor selection process.The objective of this book is to provide the reader with a good understanding regarding the four critical factors (business/physical processes, systems supporting the processes, company personnel and company/personal performance measures) that influence the success of any e-manufacturing implementation, and the synchronization required between these factors.· Discover how to implement the flexible and responsive supply chain and manufacturing execution systems required for competitive and customer-focused manufacturing· Build a working knowledge of the latest plant automation, manufacturing execution systems (MES) and supply chain management (SCM) design techniques· Gain a fuller understanding of the four critical factors (business and physical processes, systems supporting the processes, company personnel, performance measurement) that influence the success of any e-manufacturing implementation, and how to evaluate and optimize all four factors

Download or read book Reliability of Safety Critical Systems written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2014-03-03 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the theory and methodology for reliability assessments of safety-critical functions through examples from a wide range of applications Reliability of Safety-Critical Systems: Theory and Applications provides a comprehensive introduction to reliability assessments of safety-related systems based on electrical, electronic, and programmable electronic (E/E/PE) technology. With a focus on the design and development phases of safety-critical systems, the book presents theory and methods required to document compliance with IEC 61508 and the associated sector-specific standards. Combining theory and practical applications, Reliability of Safety-Critical Systems: Theory and Applications implements key safety-related strategies and methods to meet quantitative safety integrity requirements. In addition, the book details a variety of reliability analysis methods that are needed during all stages of a safety-critical system, beginning with specification and design and advancing to operations, maintenance, and modification control. The key categories of safety life-cycle phases are featured, including strategies for the allocation of reliability performance requirements; assessment methods in relation to design; and reliability quantification in relation to operation and maintenance. Issues and benefits that arise from complex modern technology developments are featured, as well as: Real-world examples from large industry facilities with major accident potential and products owned by the general public such as cars and tools Plentiful worked examples throughout that provide readers with a deeper understanding of the core concepts and aid in the analysis and solution of common issues when assessing all facets of safety-critical systems Approaches that work on a wide scope of applications and can be applied to the analysis of any safety-critical system A brief appendix of probability theory for reference With an emphasis on how safety-critical functions are introduced into systems and facilities to prevent or mitigate the impact of an accident, this book is an excellent guide for professionals, consultants, and operators of safety-critical systems who carry out practical, risk, and reliability assessments of safety-critical systems. Reliability of Safety-Critical Systems: Theory and Applications is also a useful textbook for courses in reliability assessment of safety-critical systems and reliability engineering at the graduate-level, as well as for consulting companies offering short courses in reliability assessment of safety-critical systems.

Download or read book Practical Electrical Equipment and Installations in Hazardous Areas written by Geoffrey Bottrill and published by Elsevier. This book was released on 2005-02-15 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with an understanding of the hazards involved in using electrical equipment in Potentially Explosive Atmospheres. It is based on the newly adopted international IEC79 Series of Standards that are now harmonizing and replacing older national Standards. Explosion-proof installations can be expensive to design, install and operate. The strategies and techniques described in this book can significantly reduce costs whilst maintaining plant safety. The book explains the associated terminology and its correct use - from Area Classification through to the selection of explosion-protected electrical apparatus, describing how protection is achieved and maintained in line with these international requirements. The IEC standards require that engineering staff and their management are trained effectively and safely in Hazardous Areas, and this book is designed to help fulfill that need. A basic understanding of instrumentation and electrical theory would be of benefit to the reader, but no previous knowledge of hazardous area installation is required.*An engineer's guide to the hazards and best practice for using electrical equipment in Potentially Explosive Atmospheres.*Fully in line with the newly adopted international standards, the IEC79 series.*Clear explanations of terminology and background information make this the most accessible book on this subject.

Download or read book Practical Centrifugal Pumps written by Paresh Girdhar and published by Elsevier. This book was released on 2011-04-18 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Centrifugal Pumps is a comprehensive guide to pump construction, application, operation, maintenance and management issues. Coverage includes pump classifications, types and criteria for selection, as well as practical information on the use of pumps, such as how to read pump curves and cross reference. Throughout the book the focus is on best practice and developing the skills and knowledge required to recognise and solve pump problems in a structured and confident manner. Case studies provide real-world scenarios covering the design, set up, troubleshooting and maintenance of pumps.· A comprehensive guide to pump construction, design, installation, operation, troubleshooting and maintenance.· Develop real-world knowhow and practical skills through seven real-world case studies· Coverage includes pump classifications, types and criteria for selection, as well as practical information on the use of pumps

Download or read book Practical Telecommunications and Wireless Communications written by Edwin Wright and published by Elsevier. This book was released on 2004-10-16 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technololgy and structure of telecommunications networks has changed dramatically over the past few years. These developments have changed the equipment you purchase, the services you use, the providers you can choose, and the methods available for transporting data. Practical Telecommunications and Wireless Communications for Engineers and Technicians will be of particular benefit to those who want to take full advantage of the latest and most effective telecommunications technology and services.This book provides a grounding in the fundamentals of modern telecommunications systems in use in industrial, engineering and business settings. From networking for control systems to the use of Wireless LANs for enhanced on-site communications systems.This is a cutting-edge book on the fundamentals of telecommunications for anyone looking for a complete understanding of the essentials of the terms, jargon and technologies used. It has been designed for those who require a basic grounding in telecommunications for industrial, engineering and business applications.· Gain an understanding of the fundamentals of modern industrial, engineering and business telecommunications systems, from networking for industrial control to the use of Wireless LANs for enhanced on-site communications systems· Learn to take full advantage of the latest and most effective telecommunications technology and services· Provides a thorough grounding in the terms, jargon and technologies involved in data communications

Download or read book Practical Machinery Vibration Analysis and Predictive Maintenance written by Cornelius Scheffer and published by Elsevier. This book was released on 2004-07-16 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinery Vibration Analysis and Predictive Maintenance provides a detailed examination of the detection, location and diagnosis of faults in rotating and reciprocating machinery using vibration analysis. The basics and underlying physics of vibration signals are first examined. The acquisition and processing of signals is then reviewed followed by a discussion of machinery fault diagnosis using vibration analysis. Hereafter the important issue of rectifying faults that have been identified using vibration analysis is covered. The book also covers the other techniques of predictive maintenance such as oil and particle analysis, ultrasound and infrared thermography. The latest approaches and equipment used together with the latest techniques in vibration analysis emerging from current research are also highlighted. - Understand the basics of vibration measurement - Apply vibration analysis for different machinery faults - Diagnose machinery-related problems with vibration analysis techniques

Download or read book Practical Electrical Network Automation and Communication Systems written by Cobus Strauss and published by Newnes. This book was released on 2003-12-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: A professional engineer's guide to communications technology applications in electricity transmission and distribution.

Download or read book Practical Data Acquisition for Instrumentation and Control Systems written by John Park and published by Elsevier. This book was released on 2003-06-10 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Covers all aspects of the data acquisition system from design and specification to programming, installation and configuration * Gives both the novice and experienced user a solid understanding of interfacing the PC and standalone instruments to real-world signals from the laboratory to the industrial plant * Provides a thorough grasp of PC data acquisition systems and the ability to design, specify, install and configure and program data acquisition systems quickly and effectivelyThis book focuses on data acquisition and control using the PC and standalone instruments. The PC has made a dramatic impact in the ease with which the technician, scientist and engineer today can set up their own test and measurement system at a remarkably low cost. And this book aims to show you how easy it is with plenty of carefully researched information. The popular IEEE 488 interface is also covered. All aspects of the data acquisition system are included from design and specification to programming, installation and configuration. This book gives both the novice and experienced user a solid grasp of the principles and practical implementation of interfacing the PC and standalone instruments to real-world signals from the laboratory to the industrial plant. Once you have read the book, you will have a thorough grasp of PC data acquisition systems and will be able to design, specify, install and configure and program data acquisition systems quickly and effectively. * Covers all aspects of the data acquisition system from design and specification to programming, installation and configuration* Gives both the novice and experienced user a solid understanding of interfacing the PC and standalone instruments to real-world signals from the laboratory to the industrial plant* Provides a thorough grasp of PC data acquisition systems and the ability to design, specify, install and configure and program data acquisition systems quickly and effectively