Download or read book Practical Guide to the Assessment of the Useful Life of Plastics written by R. Brown and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: After price and delivery time, the most frequently asked question about a product is 'How long will it last?' Lifetime expectancy is often many years, the service conditions may be complex, and there is a scarcity of definitive data on durability. The situation is complicated by the fact that there are a vast number of degradation agents, service conditions, properties of importance and different plastics. There are many inherent difficulties in designing durability tests. In many cases, the time scale involved is such that accelerated test conditions are essential. Whilst large amounts of durability data are generated by accelerated methods, much of it is only useful for quality control purposes and relatively little has been validated as being realistically capable of representing service. Most assessments of the lifetime of plastics are made by considering some measure of performance, such as impact strength, and specifying some lower limit for the property, which is taken as the end point. Lifetime is not necessarily measured in time. For example, for some products it will be thought of as the number of cycles of use. The object of this publication is to provide practical guidance on assessing the useful service life of plastics. It describes test procedures and extrapolation techniques together with the inherent limitations and problems. The Guide aims to make available the wealth of information that can be applied to help maximise the effectiveness of a durability-testing programme. This guide seeks to be comprehensive but concentrates on the most common environmental effects causing degradation. The test procedures used are outlined and the relevant textbooks and international standards are well referenced. Examples of lifetime testing studies are cited. The Practical Guide will be useful for anyone responsible for designing, manufacturing or testing plastic components. It will also be of benefit to suppliers and users of end products, as assessment of useful lifetime is critical to the economics and safety aspects of any component. Key features Test methods outlined Accelerated testing discussed Prediction methods described Standards cited Key sources of information listed

Download or read book Practical Guide to the Assessment of the Useful Life of Rubbers written by Roger P. Brown and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The object of this publication is to provide practical guidance on assessing the useful service life of rubbers. It describes test procedures and extrapolation techniques together with the inherent limitations and problems. This Guide seeks to be comprehensive but concentrates on the most common environmental effects causing degradation and the most important mechanical properties of rubbers. The test procedures used are outlined and the relevant d104books and International standards are referenced.

Download or read book A Practical Guide to Plastics Sustainability written by Michel Biron and published by William Andrew. This book was released on 2020-04-18 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Plastics Sustainability: Concept, Solutions, and Implementation is a groundbreaking reference work offering a broad, detailed and highly practical vision of the complex concept of sustainability in plastics. The book's aim is to present a range of potential pathways towards more sustainable plastics parts and products, enabling the reader to further integrate the idea of sustainability into their design process. It begins by introducing the context and concept of sustainability, discussing perceptions, drivers of change, key factors, and environmental issues, before presenting a detailed outline of the current situation with types of plastics, processing, and opportunities for improved sustainability. Subsequent chapters focus on the different possibilities for improved sustainability, offering a step-by-step technical approach to areas including design, properties, renewable plastics, and recycling and re-use. Each of these pillars are supported by data, examples, analysis and best practice guidance. Finally, the latest developments and future possibilities are considered. - Approaches the idea of sustainability from numerous angles, offering practical solutions to improve sustainability in the development of plastic components and products - Explains how sustainability can be applied across plastics design, materials selection, processing, and end of life, all set alongside socioeconomic factors - Considers key areas of innovation, such as eco-design, novel opportunities for recycling or re-use, bio-based polymers and new technologies

Download or read book Sustainable Plastics written by Joseph P. Greene and published by John Wiley & Sons. This book was released on 2014-09-22 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing guidelines for implementing sustainable practices for traditional petroleum based plastics, biobased plastics, and recycled plastics, Sustainable Plastics and the Environment explains what sustainable plastics are, why sustainable plastics are needed, which sustainable plastics to use, and how manufacturing companies can integrate them into their manufacturing operations. A vital resource for practitioners, scientists, researchers, and students, the text includes impacts of plastics including Life Cycle Assessments (LCA) and sustainability strategies related to biobased plastics and petroleum based plastics as well as end-of-life options for petroleum and biobased plastics.

Download or read book Physical Testing of Rubber written by Roger Brown and published by Springer Science & Business Media. This book was released on 2006-03-06 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber is important in many engineering applications because of its unique properties. These properties must be measured with appropriate test methods developed specifically for this class of materials. This book provides, in one volume, comprehensive coverage of the procedures for measuring the whole range of the physical properties of rubber. This new edition presents an up-to-date introduction to the standard methods used for testing, quality control analysis, product evaluation, and production of design data for rubber and elastomers. Factors to be incorporated in the revision include the effects of newer instrumentation, the cutting back of laboratory staff, increased demands for formal accreditation and calibration, trend to product testing, overlap of thermoplastic elastomers with plastics and increased need for design data.

Download or read book Materials World written by and published by . This book was released on 2003 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seymour Carraher s Polymer Chemistry written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2003-04-30 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revolutionary and best-selling resource contains more than 200 pages of additional information and expanded discussions on zeolites, bitumen, conducting polymers, polymerization reactors, dendrites, self-assembling nanomaterials, atomic force microscopy, and polymer processing. This exceptional text offers extensive listings of laboratory exercises and demonstrations, web resources, and new applications for in-depth analysis of synthetic, natural, organometallic, and inorganic polymers. Special sections discuss human genome and protonics, recycling codes and solid waste, optical fibers, self-assembly, combinatorial chemistry, and smart and conductive materials.

Download or read book Rubber Curing and Properties written by Jean-Maurice Vergnaud and published by CRC Press. This book was released on 2016-04-19 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring the work one of the world's foremost authorities on rubber curing, this uniquely comprehensive resource provides valuable data that will allow researchers and engineers to find solutions to their own curing problems. It delves into a variety of current evaluation practices for unvulcanized and vulcanized rubber and curing methods, i

Download or read book International Polymer Science and Technology written by and published by . This book was released on 2004 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Weathering of Polymers and Plastic Materials written by Luís Eduardo Pimentel Real and published by Springer Nature. This book was released on 2023-09-12 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art on the weathering of polymers and plastic materials in outdoor applications, comprising natural weathering, accelerated climatic weathering, laboratory artificial accelerated weathering, and lifetime prediction methodology. It summarizes the most suitable methods of instrumental analysis to access and quantify (when possible) degradation caused by weathering, while also covering the degradation and stabilization of polymers based on environmental and artificially induced factors. Innovative polymer additives and some developments in polymeric materials designed for outdoor applications are also included, emphasizing a few selected cases. the book intends to be an important reference source for those involved in the study of the durability of polymers and plastics, production of plastics for exterior applications, chemists responsible for quality control of plastic products, and researchers and students across plastics engineering, polymer science, polymer chemistry and environmental science.

Download or read book Practical Guide to Single use Technology written by Adriana G Lopes and published by Smithers Rapra. This book was released on 2016-08-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single-use technology (SUT) is now available for all processing operations within the biopharmaceutical industry. It has the potential to reduce capital costs, improve plant throughput and reduce the risk of cross-contamination. However, there are no clear guidelines to aid the end-user on implementation of these technologies into a validated, good manufacturing practice (GMP) environment. This book is the first comprehensive publication of practical considerations for each stage of the implementation process of SUT, and covers the selection, specification, design and qualification of systems to meet end-user requirements.Serving as an introduction and practical reference to this growing area of application within the biopharmaceutical industry, this handbook presents:An approach for SUT implementation within an end-users facility with examples for bioreactors, tangential-flow filtration and fill-finish systems;SUT within the context of regulatory guidance, such as ICH Q8, Q9, Q10 and GMP;Strategy for standardisation of single-use bag systems and assessment of extractables and leachables;Specifications of user requirements and design of specific SUT alongside process descriptions and flow diagrams;Strategies and tools to evaluate risk with examples of risk assessments applicable to design, processing and product quality; andQualification approach for different SUT types.With the information presented in this book, engineers, researchers and professionals involved in biopharmaceuticals will be better prepared to plan and make effective decisions to design and implement SUT.

Download or read book Food Packaging and Shelf Life written by Gordon L. Robertson and published by CRC Press. This book was released on 2009-12-21 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of food packaging hardly needs emphasizing since only a handful of foods are sold in an unpackaged state. With an increasing focus on sustainability and cost-effectiveness, responsible companies no longer want to over-package their food products, yet many remain unsure just where reductions can effectively be made. Food Packaging and

Download or read book Plastics to Energy written by Sultan Al-Salem and published by William Andrew. This book was released on 2018-11-05 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics to Energy: Fuel, Chemicals, and Sustainability Implications covers important trends in the science and technology of polymer recovery, such as the thermo-chemical treatment of plastics, the impact of environmental degradation on mechanical recycling, incineration and thermal unit design, and new options in biodegradable plastics. The book also introduces product development opportunities from waste materials and discusses the main processes and pathways of the conversion of polymeric materials to energy, fuel and chemicals. A particular focus is placed on industrial case studies and academic reviews, providing a practical emphasis that enables plastics practitioners involved in end-of-life aspects to employ these processes. Final sections examine lifecycle and cost analysis of different plastic waste management processes, exploring the potential of various techniques in modelling, optimization and simulation of waste management options. - Introduces new pathways for the end-of-life treatment of plastics and polymers, including conversion to energy, fuel and other chemicals - Compares different options to assist materials scientists, engineers and waste management practitioners to choose the most effective and sustainable option - Covers the latest trends in the science and technology of polymer energy recovery

Download or read book Geosynthetics written by David I. Cook and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geosynthetics often play critical roles in civil engineering and it is important that the materials in use can withstand the physical and chemical pressures of the environment. These range from resistance to leachates from landfill to resistance to root damage in soil liners, as well as standard properties such as resistance to creep, oxidation and UV light, and tensile strength. This Rapra Review Report discusses the polymers used in each category of geosynthetics, production methods, test methods and applications. The review is accompanied by around 400 abstracts from papers and books in the Rapra Polymer Library database, to facilitate further reading on this subject.

Download or read book Plastics and Microplastics written by David E. Newton and published by Bloomsbury Publishing USA. This book was released on 2021-07-19 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic plays a vital role in today's world but has become increasingly problematic. Plastics and Microplastics: A Reference Handbook discusses the history and evolution of plastic and its many uses, both in the United States and around the world. Beginning with a history of plastic—from the first scientific discovery of the material to its diversity of forms and uses in the present day—Plastics and Microplastics: A Reference Handbook discusses the history and evolution of plastic and its many uses, both in the United States and around the world. Importantly, it delves into the problems and controversies concerning plastic and microplastics, such as the pollution of oceans, rivers, and streams; its exceptionally long shelf life; its contribution to air pollution; and ingestion of microplastics by marine life. One of the most valuable aspects of the book is its survey of the history of plastics and microplastics conducted in a manner that helps readers to identify key issues to address. Moreover, it discusses both implemented and proposed solutions. A perspectives chapter includes a broad range of voices, allowing crucial, diverse perspectives to round out the author's expertise.

Download or read book Plastics and Environmental Sustainability written by Anthony L. Andrady and published by John Wiley & Sons. This book was released on 2015-02-11 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Survey’s the issues typically raised in discussions of sustainability and plastics Discusses current issues not covered in detail previously such as ocean litter, migration of additives into food products and the recovery of plastics Covers post-consumer fate of plastics on land and in the oceans, highlighting the environmental impacts of disposal methods Details toxicity of plastics, particularly as it applies to human health Presents a clear analysis of the key plastic-related issues including numerous citations of the research base that supports and contradicts the popularly held notions

Download or read book Coated and Laminated Textiles for Aerostats and Airships written by Mangala Joshi and published by CRC Press. This book was released on 2022-03-28 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers material challenges and technology innovation in coated and laminated textiles for aerostats and airships. Aerostats/airships are lighter-than-air (LTA) aircraft which are generally used in defence applications and face many harsh environmental conditions. For sustaining such conditions, there are special requirements for the material to be used in aerostats/airships which generally include a multi-layered coated/laminated textile using a textile fabric in base layer and different polymers for coating/lamination. Therefore, this book covers typical materials developed by different countries, challenges for developing material for aerostat/airship envelope and the future scope. Features: Exclusive title on materials used for LTA envelopes. Discusses material challenges such as selection of suitable fibre, polymer, additive, coating/lamination techniques, joint type and sealing techniques. Includes typical materials developed by different companies and researchers worldwide. Clearly explains technical concepts using figures, schemes and tabulated data. Includes case studies on material developed for aerostats/airships by different countries including NASA, Lockheed Martin, JAXA, ADRDE and DRDO. This book is aimed at graduate students, researchers and professionals in textiles engineering and aerospace engineering.