Download or read book Practical Guide to Diagnosing Structural Movement in Buildings written by Malcolm Holland and published by John Wiley & Sons. This book was released on 2012-05-04 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: "What's the Crack?" When cracking is observed in a building the most common reaction is that it must be the foundations and that it must be serious. Many surveyors are nervous about diagnosing cracks. This is understandable, as the interpretation of cracks can be difficult to teach, with university courses providing little or no time for field experience. Yet by understanding one straightforward principle the majority of cracks can be diagnosed in just a few minutes. Linking this with a good knowledge of construction techniques, the factors that distort cracking patterns and the key features of common causes of cracking, almost all cracks can be diagnosed quickly and with confidence. Practical Guide to Diagnosing Structural Movement in Buildings provides a methodology by which cracks and movement in buildings can be diagnosed. Written in four parts, part one describes the key principles of movement and cracking. Parts two and three describe the main features of common forms of movement and the associated crack patterns. Part two covers causes other than ground or foundation movement and part three covers movement caused by ground or foundation problems. Part four briefly describes the techniques used to arrest further movement or repair damage cause by movement. Primarily intended for the relatively inexperienced surveyor or engineer and undergraduate students of surveying as a practical guide for use on site, it focuses on identification and diagnosis. It will not only help in correctly diagnosing the problem but it will also demonstrate a methodical approach to show and record how the diagnosis was reached – critical when giving advice to third parties. "What's the crack?" - In the vast majority of cases it's not foundation related and in most cases it's not indicating a serious defect.
Download or read book Practical Guide to Diagnosing Structural Movementin Buildings written by Malcolm Holland and published by John Wiley & Sons. This book was released on 2023-04-10 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise and readable practitioner focused guide to diagnosing the causes of cracks and movement in buildings The expanded and updated Second Edition of Practical Guide to Diagnosing Structural Movement in Buildings shows how movement can manifest as cracking in the building fabric and provides a rigorous, structured approach to understanding the evidence to ensure the surveyor can confidently diagnose the cause and impact of any structural movement they encounter. The book is written in four parts, with part one describing the key principles of movement and cracking. Parts two and three describe the main features of common forms of movement and the associated crack patterns, with part two covering causes other than ground or foundation movement and part three covering movement caused by ground or foundations. Part four briefly describes the techniques used to arrest further movement or repair damage caused by movement. Topics covered in Practical Guide to Diagnosing Structural Movement in Buildings include: First principles, including crack patterns and cracks, rotational movement, weak routes, load distribution, and movement and orientation Expansion cracking, cavity wall tie corrosion, roof spread, springing from deflected beams, and overloaded floors and beams Clay heave, uneven loading, eccentric loading on foundations, drains and drain trenches, differential foundation movement, and load concentrations on foundations Repair methods, including stitching in brickwork, reinforcing brick mortar joints, tie bars, restraint straps, underpinning, grouting, and root barriers Primarily intended for the relatively inexperienced surveyor or engineer, as well as undergraduate students, Practical Guide to Diagnosing Structural Movement in Buildings focuses on identification and diagnosis, helping to correctly diagnose problems while also demonstrating a methodical approach to show and record how the diagnosis was reached, which is critical in client satisfaction.
Download or read book Defects and Deterioration in Buildings written by Barry Richardson and published by Routledge. This book was released on 2002-01-04 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: A professional reference designed to assist surveyors, engineers, architects and contractors in diagnosing existing problems and avoiding them in new buildings. Fully revised and updated, this edition, in new clearer format, covers developments in building defects, and problems such as sick building syndrome. Well liked for its mixture of theory and practice the new edition will complement Hinks and Cook's student textbook on defects at the practitioner level.
Download or read book Structural Condition Assessment written by Robert T. Ratay and published by John Wiley & Sons. This book was released on 2005-01-17 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Structural Condition Assessment, editor-in-chief Robert T. Ratay gathers together the leading people in the field to produce the first unified resource on all aspects of structural condition assessment for strength, serviceability, restoration, adaptive reuse, code compliance, and vulnerability. Organized by the four main stages of a structural evaluation, this book provides an introduction to structural deterioration and its consequences, the business and legal aspects of conducting an evaluation, initial survey and evaluation techniques for various structures, and specific tests for five of the most common structural materials (concrete, steel, masonry, timber and fabric.)
Download or read book Building Failures written by W.H. Ransom and published by Routledge. This book was released on 2002-11-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years building failures and the resulting lawsuits and awards for damages have frequently been in the news. The biggest headlines may have been reserved for structural failures and complete collapses, but we should not forget the less newsworthy failures such as leaky roofs, damp walls, dropped foundations and rotted timber. This book gives practical guidance on the prevention of failure by describing the nature and cause of the most common defects in buildings, and then shows how they should be avoided in design and construction.
Download or read book Concrete Repair written by Michael G. Grantham and published by CRC Press. This book was released on 2011-04-04 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is an inherently complex material to produce and an even more complex material to repair. With growing pressure to maintain the built environment, and not simply to demolish and rebuild, the need to repair concrete buildings and other structures is increasing and is expected to become of greater importance in the future.This straightforwar
Download or read book Structural Analysis of Historic Buildings written by J. Stanley Rabun and published by John Wiley & Sons. This book was released on 2000-02-21 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mit Hilfe der Statikanalyse wird der Zustand der Bausubstanz und Konstruktionssysteme eines Bauwerkes untersucht. Wenn Probleme am Bauwerk entstehen, führen Statiker eine solche Analyse durch, um die am besten geeigneten Korrekturmöglichkeiten zu bestimmen. Auch Architekten müssen über Grundkenntnisse in der Baustatik verfügen, um Gebäude entwerfen zu können, die ihre Funktion optimal erfüllen und um mit anderen Kollegen des Bauteams effektiv zusammenzuarbeiten. Außerdem müssen Architekten in der Lage sein, selbst eine Statikanalyse durchzuführen, wenn sie ein vorhandenes Gebäude umbauen wollen. Dieses Buch ist ein wichtiges Nachschlagewerk für jeden, der historische Bauten umbauen und verändern will. Es ist darüber hinaus ein nützlicher Leitfaden zu technischen Daten und Berechnungsmethoden, die den Architekten und Statikern damals zur Verfügung standen, als das Baumaterial oder Konstruktionssystem eingesetzt wurde. Mit einer Fülle praktischer Informationen bietet es die Grundlage für moderne Zertifizierung durch den Experten.
Download or read book Repair of Concrete Structures written by R T L Allen and published by CRC Press. This book was released on 1992-12-10 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical and comprehensive book enables the engineer to diagnose the cause of a fault, choose the appropriate remedial technique and ensure that the repair work is completed satisfactorily. It will be of value to all those who need to commission, supervise or carry out repairs to concrete structures.
Download or read book Building Failures written by W.H. Ransom and published by Routledge. This book was released on 2002-11-01 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years building failures and the resulting lawsuits and awards for damages have frequently been in the news. The biggest headlines may have been reserved for structural failures and complete collapses, but we should not forget the less newsworthy failures such as leaky roofs, damp walls, dropped foundations and rotted timber. This book gives practical guidance on the prevention of failure by describing the nature and cause of the most common defects in buildings, and then shows how they should be avoided in design and construction.
Download or read book Practical Guide to Structural Robustness and Disproportionate Collapse in Buildings written by and published by . This book was released on 2010 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Observers in Control Systems written by George Ellis and published by Elsevier. This book was released on 2002-10-16 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Observers are digital algorithms that combine sensor outputs with knowledge of the system to provide results superior to traditional structures, which rely wholly on sensors. Observers have been used in selected industries for years, but most books explain them with complex mathematics. Observers in Control Systems uses intuitive discussion, software experiments, and supporting analysis to explain the advantages and disadvantages of observers. If you are working in controls and want to improve your control systems, observers could be the technology you need and this book will give you a clear, thorough explanation of how they work and how to use them. Control systems and devices have become the most essential part of nearly all mechanical systems, machines, devices and manufacturing systems throughout the world. Increasingly the efficiency of production, the reliability of output and increased energy savings are a direct result of the quality and deployment of the control system. A modern and essential tool within the engineer's kit is the Observer which helps improve the performance and reduce the cost of these systems. George Ellis is the author of the highly successful Control System Design Guide (Second Edition). Unlike most controls books, which are written by control theorists and academics, Ellis is a leading engineer, designer, author and lecturer working in industry directly with the users of industrial motion control systems. Observers in Control Systems is written for all professional engineers and is designed to be utilized without an in-depth background in control theory. This is a "real-world" book which will demonstrate how observers work and how they can improve your control system. It also shows how observers operate when conditions are not ideal and teaches the reader how to quickly tune an observer in a working system. Software Available online: A free updated and enhanced version of the author's popular Visual ModelQ allows the reader to practice the concepts with Visual ModelQ models on a PC. Based on a virtual laboratory, all key topics are demonstrated with more than twenty control system models. The models are written in Visual ModelQ ,and are available on the Internet to every reader with a PC. Teaches observers and Kalman filters from an intuitive perspective Explains how to reduce control system susceptibility to noise Shows how to design an adaptive controller based on estimating parameter variation using observers Shows how to improve a control system's ability to reject disturbances Key topics are demonstrated with PC-based models of control systems. The models are written in both MatLab® and ModelQ; models are available free of charge
Download or read book Structural Renovation of Buildings Methods Details Design Examples written by Alexander Newman and published by McGraw Hill Professional. This book was released on 2001 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make any renovation job go smoother. Building renovation, conservation and reuse represents more than half of all construction work - and is projected to increase to 80% by 2004. Structural Renovation of Buildings, by Alexander Newman, puts a single, convenient source of information about all aspects of structural renovation and strengthening of buildings at your fingertips. While its focus is largely on low and midrise buildings, you can apply the principles it clarifies to buildings of any size - steel-framed, masonry, or wood. Whether you're repairing deteriorated concrete...rehabilitating slabs on grade...strengthening lateral-load resisting systems...renovating a building facade...handling seismic upgrades or fire damage, you'll find this time-and-trouble-saving guide loaded with practical tips, methods, and design examples. It's also heavily illustrated with autoCAD generated details, supplier illustrations of materials, procedural techniques, and much, much more.
Download or read book Sustainable Steel Buildings written by Milan Veljkovic and published by John Wiley & Sons. This book was released on 2016-10-31 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Steel Buildings betrachtet Stahl und seine Einsatzmöglichkeiten als nachhaltigen Konstruktionswerkstoff. Es bietet einen umfassenden Überblick hinsichtlich Nachhaltigkeit und zeigt auf, wie Stahl mit einem hohen Maß an Nachhaltigkeit für Gebäude genutzt werden kann. Das Buch konzentriert sich auf die Vor- und Nachteile von Stahl und wie diese Eigenschaften im Rahmen internationaler Zertifizierungssysteme eingesetzt werden können (DGNB, LEED, BREEAM, openhouse etc). Um ein möglichst umfassendes Spektrum abzudecken, behandelt das Buch die folgenden Themen: * Der Hintergrund nachhaltigen Bauens * Grundlagen einer ressourcenschonenden Bauweise * Methoden und Gestaltungsmittel für die Bereitstellung nachhaltiger Gebäude * Stahl und sein Abschneiden in Zertifizierungssystemen, sowohl Kriterien als auch werkstoffspezifische Antworten * Informationen und Daten hinsichtlich relevanter Stahlbauprodukte * Beispiele nachhaltiger Gebäude in Stahlbauweise.
Download or read book Building Pathology written by David S. Watt and published by John Wiley & Sons. This book was released on 2009-05-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building pathology provides an interdisciplinary approach to the study of defects and performance in order to develop appropriate remedial and management solutions. It considers how the structure and materials of a building relate to its environment, its occupants and the way the building is used, so as to develop a better understanding of building failures. This book provides a well illustrated introduction to the discipline of building pathology, bridging the gap between current approaches to the surveying of buildings and the detailed study of defect diagnosis, prognosis and remediation. It features a number of case studies and a detailed set of references and further reading. This second edition has been updated to reflect changes in legislation, guidance and construction, and provides new case studies that demonstrate the breadth and depth of the subject.
Download or read book Has Your House Got Cracks written by Tim Freeman and published by Thomas Telford. This book was released on 2002 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing practical guidance for homeowners whose properties have been affected by subsidence, or heave, or who are concerned by the potential risk of damage, this second edition has been expanded to include sections on other types of subsidence and causes of damage that are unrelated to foundation movement.
Download or read book Constructing Frames of Reference written by Lewis R. Binford and published by University of California Press. This book was released on 2019-05-07 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many consider Lewis Binford to be the single most influential figure in archaeology in the last half-century. His contributions to the "New Archaeology" changed the course of the field, as he argued for the development of a scientifically rigorous framework to guide the excavation and interpretation of the archaeological record. This book, the culmination of Binford's intellectual legacy thus far, presents a detailed description of his methodology and its significance for understanding hunter-gatherer cultures on a global basis. This landmark publication will be an important step in understanding the great process of cultural evolution and will change the way archaeology proceeds as a scientific enterprise. This work provides a major synthesis of an enormous body of cultural and environmental information and offers many original insights into the past. Binford helped pioneer what is now called "ethnoarchaeology"—the study of living societies to help explain cultural patterns in the archaeological record—and this book is grounded on a detailed analysis of ethnographic data from about 340 historically known hunter-gatherer populations. The methodological framework based on this data will reshape the paradigms through which we understand human culture for years to come.
Download or read book Concrete Repair and Maintenance Illustrated written by Peter H. Emmons and published by John Wiley & Sons. This book was released on 1992-12-28 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: From parking garages to roads and bridges, to structural concrete, this comprehensive book describes the causes, effects and remedies for concrete wear and failure. Hundreds of clear illustrations show users how to analyze, repair, clean and maintain concrete structures for optimal performance and cost effectiveness. This book is an invaluable reference for planning jobs, selecting materials, and training employees. With information organized in all-inclusive units for easy reference, this book is ideal for concrete specialists, general contractors, facility managers, civil and structural engineers, and architects.
