Download or read book Practical Balancing of Rotating Machinery written by Derek Norfield and published by Elsevier. This book was released on 2011-04-18 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating machinery (eg pumps, motors, compressors) is normally manufactured to precise measurements but there comes a point when the costs of manufacture mean that further precision is not cost-effective and thus any slight imbalance inherent in the machine will need to be attended to after manufacture. When such machinery is in operation, often at very high speeds of thousands of revs per minute, any imbalance will set up vibration and often noise. In addition, such imbalance will cause extra wear and loss of efficiency in the machine. The answer is to balance the affected parts of the machine so that it operates smoothly and efficiently. This book is a practical account of such balancing techniques e.g how to balance a rotor, how to set up and verify performance of a balancing machine, and procedures for on-site balancing. In addition, other common causes of vibration will be covered e.g. misalignment, bad bearings and looseness. This book is the distillation of a successful course run by the author and developed over 20 years. University engineering departments do not teach balancing techniques beyond the very basic, and there is a need for educators and engineers to have a practical book available on the topic. · A practical book which will help the reader understand the importance of balance in today's high technology world · Outlines the history of dynamic balancing and other vibration reduction techniques · Profusely illustrated throughout

Download or read book Rotating Machinery written by Robert B. McMillan and published by CRC Press. This book was released on 2020-11-26 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A theoretical and practical understanding of unbalance and misalignment in rotating equipment is presented here. These two conditions account for the vast majority of problems with rotating equipment encountered in the real world.;Numerous examples and solutions are included to assist in understanding the various concepts. Included is information on vibration and how it is used to determine the operational integrity of rotating machinery. Also detailed are the relationships between various vibration characteristics which provide an understanding of the forces generated within operating machinery when conditions of unbalance and misalignment are present. Resonance and beat frequencies are detailed along with sources and cures.;Also covered are proper inspection procedures, single plane and dual plane methods of balancing rotating equipment, the three circle method of balancing slow speed fans, advanced rim and face method of precision alignment, and the reverse indicator method of alignment plus much more to fortify the learning experience.

Download or read book Dynamic Balancing of Rotating Machinery written by John Bernard Wilcox and published by . This book was released on 1967 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Balancing of High Speed Machinery written by Mark S. Darlow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern rotating machinery, particularly turbomachinery, is frequently being designed to operate at higher speeds than in the past. Consequently, there is an increased need to balance high-speed rotors. The purpose of this book is to provide the engineering student or practicing engineer with a single, complete reference on high-speed rotor balancing. To this end, a detailed analytical background and practical application procedures are presented for each of the principal high-speed rotor balancing methods, i.e. modal balancing, influence coefficient balancing and the Unified Balancing Approach. This information is supplemented and supported through a presentation of the theoretical development of synchronous rotor vibration and a brief overview of rigid rotor balancing techniques and machines. This is the first time this material is available in a single, concise volume, together with detailed descriptions of application procedures.

Download or read book Dynamic and Static Balancing written by Edward K. Hammond and published by . This book was released on 1921 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Machinery Vibration Measurement and Analysis written by Victor Wowk and published by McGraw Hill Professional. This book was released on 1991-07-22 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how to use state-of-the-art instrumentation - transducers and fast fourier transform (FFT) specturm analyzers - to monitor machine conditions using the vibration signature.

Download or read book Vibrations of Rotating Machinery written by Osami Matsushita and published by Springer. This book was released on 2017-05-22 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book opens with an explanation of the vibrations of a single degree-of-freedom (dof) system for all beginners. Subsequently, vibration analysis of multi-dof systems is explained by modal analysis. Mode synthesis modeling is then introduced for system reduction, which aids understanding in a simplified manner of how complicated rotors behave. Rotor balancing techniques are offered for rigid and flexible rotors through several examples. Consideration of gyroscopic influences on the rotordynamics is then provided and vibration evaluation of a rotor-bearing system is emphasized in terms of forward and backward whirl rotor motions through eigenvalue (natural frequency and damping ratio) analysis. In addition to these rotordynamics concerning rotating shaft vibration measured in a stationary reference frame, blade vibrations are analyzed with Coriolis forces expressed in a rotating reference frame. Other phenomena that may be assessed in stationary and rotating reference frames include stability characteristics due to rotor internal damping and instabilities due to asymmetric shaft stiffness and thermal unbalance behavior.

Download or read book Fundamentals of Rotating Machinery Diagnostics written by Donald E. Bently and published by American Society of Mechanical Engineers. This book was released on 2002 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical course in the fundamentals of machinery diagnostics for anyone who works with rotating machinery, from operator to manager, from design engineer to machinery diagnostician. This comprehensive book thoroughly explains and demystifies important concepts needed for effective machinery malfunction diagnosis: (A) Vibration fundamentals: vibration, phase, and vibration vectors. (B) Data plots: timebase, average shaft centerline, polar, Bode, APHT, spectrum, trend XY, and the orbit. (C) Rotor dynamics: the rotor model, dynamic stiffness, modes of vibration, anisotropic (asymmetric) stiffness, stability analysis, torsional and axial vibration, and basic balancing. Modern root locus methods (pioneered by Walter R. Evans) are used throughout this book. (D) Malfunctions: unbalance, rotor bow, high radial loads, misalignment, rub and looseness, fluid-induced instability, and shaft cracks. Hundreds of full-color illustrations explain key concepts, and several detailed case studies show how these concepts were used to solve real machinery problems. A comprehensive glossary of diagnostic terms is included.

Download or read book Dynamics of Rotating Machines written by M. I. Friswell and published by Cambridge University Press. This book was released on 2010-03-31 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables engineers to understand the dynamics of rotating machines, from basic explanations to detailed numerical models and analysis.

Download or read book Rotor Dynamics written by J. S. Rao and published by New Age International. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Revised And Enlarged Edition Of The Book Presents An In-Depth Study Of The Dynamic Behaviour Of Rotating And Reciprocating Machinery. It Evolved Out Of Lectures Delivered At Different Universities Over The Last Two Decades. The Book Deals With Torsional And Bending Vibrations Of Rotors, Stability Aspects, Balancing And Condition Monitoring. Closed Form Solutions Are Given Wherever Possible And Parametric Studies Presented To Give A Clear Understanding Of The Subject. Transfer Matrix Methods Is Extensively Used For General Class Of Rotors For Both Bending And Torsional Vibrations.Special Attentions Are Given To Transient Analysis Of The Rotors Which Is Becoming An Essential Part Of The Design Of High Speed Machinery. Systems With Fluid Film Bearings, Cracked Rotors And Two Spool Rotors Are Also Presented.A First Course On Theory Of Vibration Is A Prerequisite To This Study. Analysis Used Is Fairly Simple, But Sufficiently Advanced To The Requisite Level Of Predicting Practical Observations. As Far As Possible, Practical Examples Are Illustrated, So That The Book Is Also Useful To Practising Engineers.A Special Feature Of This Book Is Diagnostics Of Rotating Machinery Using Vibration Signature Analysis And Application Of Expert Systems To A Field Engineer In Trouble Shooting Work.

Download or read book Machinery Vibration written by Victor Wowk and published by McGraw-Hill Professional Publishing. This book was released on 1995 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows you how to implement simple methods to mass balance without expensive instruments, and explores such topics as the vestor mathematics of balancing, mass centering, index balancing, and designs for balance weights. It features several illustrations, real-world case studies, and worked-out problems.

Download or read book Shaft Alignment Handbook written by John Piotrowski and published by CRC Press. This book was released on 2006-11-02 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating machinery is the heart of many industrial operations, but many engineers and technicians perform shaft alignment by guesswork or with limited knowledge of the tools and methods available to accurately and effectively align their machinery. Two decades ago, John Piotrowski conferred upon the field an unprecedented tool: the first edition of

Download or read book Practical Machinery Vibration Analysis and Predictive Maintenance written by Cornelius Scheffer and published by Elsevier. This book was released on 2004-07-16 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machinery Vibration Analysis and Predictive Maintenance provides a detailed examination of the detection, location and diagnosis of faults in rotating and reciprocating machinery using vibration analysis. The basics and underlying physics of vibration signals are first examined. The acquisition and processing of signals is then reviewed followed by a discussion of machinery fault diagnosis using vibration analysis. Hereafter the important issue of rectifying faults that have been identified using vibration analysis is covered. The book also covers the other techniques of predictive maintenance such as oil and particle analysis, ultrasound and infrared thermography. The latest approaches and equipment used together with the latest techniques in vibration analysis emerging from current research are also highlighted. Understand the basics of vibration measurement Apply vibration analysis for different machinery faults Diagnose machinery-related problems with vibration analysis techniques

Download or read book 1 Forsthoffer s Rotating Equipment Handbooks written by William E. Forsthoffer and published by Elsevier. This book was released on 2005-12-16 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Fundamentals of Rotating Equipment' is an overview of the main types of rotating machinery in industry, and covers such aspects as system dynamics, surge control, vibration and balancing, radial bearing design, performance parameters, rotor system design and operation, rotor axial (thrust) forces, performance objectives and mechanical restraints, auxiliary systems and seals. This book will enhance rotating equipment reliability and safety throughout the many industries where such equipment is vital to a successful business. Over recent years there have been substantial changes in those industries which are concerned with the design, purchase and use of special purpose (ie critical, high-revenue) rotating equipment. Key personnel have been the victims of early retirement or have moved to other industries: contractors and end-users have reduced their technical staff and consequently have to learn complex material ‘from scratch’. As a result, many companies are finding that they are devoting unnecessary man hours to the discovery and explanation of basic principles, and having to explain these to clients who should already be aware of them. In addition, the lack of understanding by contractors and users of equipment characteristics and operating systems often results in a ‘wrong fit’ and a costly reliability problem. The stakes can be high, and it against this background that this book has been published. It is the outcome of many years experience and is based on well-honed teaching material which is easily readable, understandable and actually enjoyable! This is a five volume set. The volumes are: 1. Fundamentals of Rotating Equipment 2. Pumps 3. Compressors 4. Auxiliary Systems 5. Reliability Optimization thru Component Condition Monitoring and Root Cause Analysis * A distillation of many years of on-site training by a well-known US Engineer who also operates in the Middle East. * A Practical book written in a succinct style and well illustrated throughout. * An overview of the main types of rotating machinery in industry.

Download or read book Dynamics of Machinery written by Hans Dresig and published by Springer Science & Business Media. This book was released on 2010-07-27 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic loads and undesired oscillations increase with higher speed of machines. At the same time, industrial safety standards require better vibration reduction. This book covers model generation, parameter identification, balancing of mechanisms, torsional and bending vibrations, vibration isolation, and the dynamic behavior of drives and machine frames as complex systems. Typical dynamic effects, such as the gyroscopic effect, damping and absorption, shocks, resonances of higher order, nonlinear and self-excited vibrations are explained using practical examples. These include manipulators, flywheels, gears, mechanisms, motors, rotors, hammers, block foundations, presses, high speed spindles, cranes, and belts. Various design features, which influence the dynamic behavior, are described. The book includes 60 exercises with detailed solutions. The substantial benefit of this "Dynamics of Machinery" lies in the combination of theory and practical applications and the numerous descriptive examples based on real-world data. The book addresses graduate students as well as engineers.

Download or read book MATLAB written by Kelly Bennett and published by BoD – Books on Demand. This book was released on 2014-09-08 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB is an indispensable asset for scientists, researchers, and engineers. The richness of the MATLAB computational environment combined with an integrated development environment (IDE) and straightforward interface, toolkits, and simulation and modeling capabilities, creates a research and development tool that has no equal. From quick code prototyping to full blown deployable applications, MATLAB stands as a de facto development language and environment serving the technical needs of a wide range of users. As a collection of diverse applications, each book chapter presents a novel application and use of MATLAB for a specific result.

Download or read book Vibration Problems in Machines written by Arthur W. Lees and published by CRC Press. This book was released on 2020-07-02 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration Problems in Machines explains how to infer information about the internal operations of rotating machines from external measurements through methods used to resolve practical plant problems. Second edition includes summary of instrumentation, methods for establishing machine rundown data, relationship between the rundown curves and the ideal frequency response function. The section on balancing has been expanded and examples are given on the strategies for balancing a rotor with a bend, with new section on instabilities. It includes case studies with real plant data, MATLAB® scripts and functions for the modelling and analysis of rotating machines.