Download or read book Power Systems Analysis Illustrated with MATLAB and ETAP written by Hemchandra Madhusudan Shertukde and published by CRC Press. This book was released on 2019-01-15 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical power is harnessed using several energy sources, including coal, hydel, nuclear, solar, and wind. Generated power is needed to be transferred over long distances to support load requirements of customers, viz., residential, industrial, and commercial. This necessitates proper design and analysis of power systems to efficiently control the power flow from one point to the other without delay, disturbance, or interference. Ideal for utility and power system design professionals and students, this book is richly illustrated with MATLAB® and Electrical Transient Analysis Program (ETAP®) to succinctly illustrate concepts throughout, and includes examples, case studies, and problems. Features Illustrated throughout with MATLAB and ETAP Proper use of positive/negative/zero sequence analysis of a given one-line diagram (OLD) associated with a grid, as well as finger-holding instructions to tackle a power system analysis (PSA) problem for a given OLD of a grid On-line evaluation of power flow, short-circuit analysis, and related PSA for a given OLD Appropriately learn the finer nuances of designing the several components of a PSA, including transmission lines, transformers, generators/motors, and illustrate the corresponding equivalent circuit Case studies from utilities and independent system operators
Download or read book THE EASIEST WAY TO RUN ETAP SOFTWARE written by Aji Akbar Firdaus and published by Airlangga University Press. This book was released on 2023-05-23 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a translation of the Indonesian version titled “Cara EZ Belajar ETAP”. This English version is expected to be available for a broad range of readers. Do you know the electrical power system? This system is a high or medium voltage electrical network but calculations are required to measure and validate a network system. However, if manual calculations are used, it will take a very long time. Therefore, a software named etap was created. etap (electrical transient analysis program) is a software used to simplify the analysis of an electrical network system. As its name suggests, etap can work to analyze power flow (load flow), transient disturbance (transient), harmonics, and up to the protection system (short circuit). This etap software also has standards, namely ANSI (American National Standards Institute) and IEC (International Electrotechnical Commission) standards.
Download or read book Power System Analysis written by N. V. Ramana and published by Pearson Education India. This book was released on 2011 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power System Analysis is a comprehensive text designed for an undergraduate course in electrical engineering. Written in a simple and easy-to-understand manner, the book introduces the reader to power system network matrices and power system steady-state stability analysis. The book contains in-depth coverage of symmetrical fault analysis and unbalanced fault analysis; exclusive chapters on power flow studies; a comprehensive chapter on transient stability; precise explanation supported by suitable examples and is replete with objective questions and review questions.
Download or read book Power Systems Analysis written by P.S.R. Murty and published by Butterworth-Heinemann. This book was released on 2017-06-09 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Systems Analysis, Second Edition, describes the operation of the interconnected power system under steady state conditions and under dynamic operating conditions during disturbances. Written at a foundational level, including numerous worked examples of concepts discussed in the text, it provides an understanding of how to keep power flowing through an interconnected grid. The second edition adds more information on power system stability, excitation system, and small disturbance analysis, as well as discussions related to grid integration of renewable power sources. The book is designed to be used as reference, review, or self-study for practitioners and consultants, or for students from related engineering disciplines that need to learn more about power systems. Includes comprehensive coverage of the analysis of power systems, useful as a one-stop resource Features a large number of worked examples and objective questions (with answers) to help apply the material discussed in the book Offers foundational content that provides background and review for the understanding and analysis of more specialized areas of electric power engineering
Download or read book ELECTRICAL POWER SYSTEMS written by P. VENKATESH and published by PHI Learning Pvt. Ltd.. This book was released on 2012-04-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces electrical engineering students to the most relevant concepts and techniques in three major areas today in power system engineering, namely analysis, security and deregulation. The book carefully integrates theory and practical applications. It emphasizes power flow analysis, details analysis problems in systems with fault conditions, and discusses transient stability problems as well. In addition, students can acquire software development skills in MATLAB and in the usage of state-of-the-art software tools such as Power World Simulator (PWS) and Siemens PSS/E. In any energy management/operations control centre, the knowledge of contingency analysis, state estimation and optimal power flow is of utmost importance. Part 2 of the book provides comprehensive coverage of these topics. The key issues in electricity deregulation and restructuring of power systems such as Transmission Pricing, Available Transfer Capability (ATC), and pricing methods in the context of Indian scenario are discussed in detail in Part 3 of the book. The book is interspersed with problems for a sound understanding of various aspects of power systems. The questions at the end of each chapter are provided to reinforce the knowledge of students as well as prepare them from the examination point of view. The book will be useful to both the undergraduate students of electrical engineering and postgraduate students of power engineering and power management in several courses such as Power System Analysis, Electricity Deregulation, Power System Security, Restructured Power Systems, as well as laboratory courses in Power System Simulation.
Download or read book Power System Modelling and Scripting written by Federico Milano and published by Springer Science & Business Media. This book was released on 2010-09-08 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power system modelling and scripting is a quite general and ambitious title. Of course, to embrace all existing aspects of power system modelling would lead to an encyclopedia and would be likely an impossible task. Thus, the book focuses on a subset of power system models based on the following assumptions: (i) devices are modelled as a set of nonlinear differential algebraic equations, (ii) all alternate-current devices are operating in three-phase balanced fundamental frequency, and (iii) the time frame of the dynamics of interest ranges from tenths to tens of seconds. These assumptions basically restrict the analysis to transient stability phenomena and generator controls. The modelling step is not self-sufficient. Mathematical models have to be translated into computer programming code in order to be analyzed, understood and “experienced”. It is an object of the book to provide a general framework for a power system analysis software tool and hints for filling up this framework with versatile programming code. This book is for all students and researchers that are looking for a quick reference on power system models or need some guidelines for starting the challenging adventure of writing their own code.
Download or read book Computer Aided Power System Analysis written by Ramasamy Natarajan and published by CRC Press. This book was released on 2002-04-03 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title evaluates the performance, safety, efficiency, reliability and economics of a power delivery system. It emphasizes the use and interpretation of computational data to assess system operating limits, load level increases, equipment failure and mitigating procedures through computer-aided analysis to maximize cost-effectiveness.
Download or read book Modern Power Systems Analysis written by Xi-Fan Wang and published by Springer Science & Business Media. This book was released on 2010-06-07 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capability of effectively analyzing complex systems is fundamental to the operation, management and planning of power systems. This book offers broad coverage of essential power system concepts and features a complete and in-depth account of all the latest developments, including Power Flow Analysis in Market Environment; Power Flow Calculation of AC/DC Interconnected Systems and Power Flow Control and Calculation for Systems Having FACTS Devices and recent results in system stability.
Download or read book MATLAB written by Ali Saghafinia and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventionally, the simulation of power engineering applications can be a challenge for both undergraduate and postgraduate students. For the easy implementation of several kinds of power structure and control structures of power engineering applications, simulators such as MATLAB/(Simulink and coding) are necessary, especially for students, to develop and test various circuits and controllers in all branches of the field of power engineering. This book presents three different applications of MATLAB in the power system domain. The book includes chapters that show how to simulate and work with MATLAB software for MATLAB professional applications of power systems. Moreover, this book presents techniques to simulate power matters easily using the related toolbox existing in MATLAB/Simulink.
Download or read book Computer Aided Power Systems Analysis written by George Kusic and published by CRC Press. This book was released on 2018-04-20 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer applications yield more insight into system behavior than is possible by using hand calculations on system elements. Computer-Aided Power Systems Analysis: Second Edition is a state-of-the-art presentation of basic principles and software for power systems in steady-state operation. Originally published in 1985, this revised edition explores power systems from the point of view of the central control facility. It covers the elements of transmission networks, bus reference frame, network fault and contingency calculations, power flow on transmission networks, generator base power setting, and state estimation from on-line measurements. The author develops methods used for full-scale networks. In the process of coding and execution, the user learns how the methods apply to actual networks, develops an understanding of the algorithms, and becomes familiar with the process of varying the parameters of the program. Intended for users with a background that includes AC circuit theory, some basic control theory, and a first course in electronic machinery, this book contains material based upon the author’s experience both in the field and in the classroom, as well as many Institute of Electrical and Electronic Engineers (IEEE) publications. His mathematical approach and complete explanations allow readers to develop a solid foundation in power systems analysis. This second edition includes a CD-ROM with stand-alone software to perform computations of all principles covered in the chapters. Executable programs include 0,1,2 conversions, double-hung shielded transmission line parameters, zero and positive bus impedance computations for unbalanced faults, power flow, unit commitment, and state estimation.
Download or read book Power Systems Analysis written by Arthur R. Bergen and published by . This book was released on 2000 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book on power system analysis to explore the major changes in the structure and operation of the electric utility industry, and to show how power system operation will be affected by the new changes. It reflects the trends in state-of-the-art,computer-based power system analysis and shows how to apply each modern analysis tool in designing and improving an expansion of an existing power system.KEY FEATURES: Features a computer-based design example (carried out from chapter-to-chapter) which uses all the analysis. As the example develops, readers determine the parameter values for a proposed transmission system upgrade to support load growth and a new steel mill being located in the area; convert all the parameters to per unit -- the preferred choice of units for system analysis; determine typical parameters for the generators in the system being designed; develop the admittance matrix and the impedance matrix for the system being designed; conduct the power flow and check the designed system for possible violations, and appropriately modify the design; and conduct a contingency analysis on the designed system; analyze the behavior of the designed system under faulted condition; continue the design with a selection of relay settings to protect the system in the event of these faulted conditions; and perform a transient stability simulation on the system and verify the ability of the system to remain stable. For engineers working in the electric utility industry.
Download or read book Electric Energy Systems written by Antonio Gomez-Exposito and published by CRC Press. This book was released on 2017-12-19 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: As demonstrated by recent major blackouts, power grids and their associated markets play a vital role in the operation of our society. Understanding how electric generation, transmission, and delivery systems interact and operate is paramount to guaranteeing reliable sources of electricity. Electric Energy Systems offers highly comprehensive and detailed coverage of power systems operations, uniquely integrating technical and economic analyses. The book fully develops classical subjects such as load flow, short-circuit analysis, and economic dispatch within the context of the new deregulated, competitive electricity markets. With contributions from 24 internationally recognized specialists in power engineering, the text also presents a wide range of advanced topics including harmonic load flow, state estimation, and voltage and frequency control as well as electromagnetic transients, fault analysis, and angle stability. A well-needed and updated extension on classical power systems analysis books, Electric Energy Systems provides an in-depth analysis of the most relevant issues affecting the blood-line of our society, the generation and transmission systems for electric energy.
Download or read book Advanced Power System Analysis and Dynamics written by L.P. Singh and published by New Age International. This book was released on 2006 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Is A Result Of Teaching Courses In The Areas Of Computer Methods In Power Systems, Digital Simulation Of Power Systems, Power System Dynamics And Advanced Protective Relaying To The Undergraduate And Graduate Students In Electrical Engineering At I.I.T., Kanpur For A Number Of Years And Guiding Several Ph.D. And M.Tech. Thesis And B.Tech. Projects By The Author. The Contents Of The Book Are Also Tested In Several Industrial And Qip Sponsored Courses Conducted By The Author As A Coordinator. The Present Edition Includes A Sub-Section On Solution Procedure To Include Transmission Losses Using Dynamic Programming In The Chapter On Economic Load Scheduling Of Power System. In This Edition An Additional Chapter On Load Forecasting Has Also Been Included. The Present Book Deals With Almost All The Aspects Of Modern Power System Analysis Such As Network Equations And Its Formulations, Graph Theory, Symmetries Inherent In Power System Components And Its Formulations, Graph Theory, Symmetries Inherent In Power System Components And Development Of Transformation Matrices Based Solely Upon Symmetries, Feasibility Analysis And Modeling Of Multi-Phase Systems, Power System Modeling Including Detailed Analysis Of Synchronous Machines, Induction Machines And Composite Loads, Sparsity Techniques, Economic Operation Of Power Systems Including Derivation Of Transmission Loss Equation From The Fundamental, Solution Of Algebraic And Differential Equations And Power System Studies Such As Load Flow, Fault Analysis And Transient Stability Studies Of A Large Scale Power System Including Modern And Related Topics Such As Advanced Protective Relaying, Digital Protection And Load Forecasting. The Book Contains Solved Examples In These Areas And Also Flow Diagrams Which Will Help On One Hand To Understand The Theory And On The Other Hand, It Will Help The Simulation Of Large Scale Power Systems On The Digital Computer. The Book Will Be Easy To Read And Understand And Will Be Useful To Both Undergraduate And Graduate Students In Electrical Engineering As Well As To The Engineers Working In Electricity Boards And Utilities Etc.
Download or read book Computer Analysis of Power Systems written by Jos Arrillaga and published by John Wiley & Sons. This book was released on 1990 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the main computer modelling techniques that constitute the basic framework of modern power system analysis. Basic knowledge of power system theory, matrix analysis and numerical techniques is presumed, although appendices and references are included to provide the relevant background.
Download or read book Advanced Power System Analysis and Dynamics written by Lakneshwar Prakash Singh and published by . This book was released on 1983 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power System Analysis written by Charles A. Gross and published by John Wiley & Sons. This book was released on 1986 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a basic comprehensive treatment of the major electrical engineering problems associated with the design and operation of electric power systems. The major components of the power system are modeled in terms of their sequence (symmetrical component) equivalent circuits. Reviews power flow, fault analysis, economic dispatch, and transient stability in power systems.
Download or read book Power System Analysis and Design written by J. Duncan Glover and published by Brooks/Cole. This book was released on 1994 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to present methods of power system analysis and design, particularly with the aid of a personal computer, in sufficient depth to give the student the basic theory at the undergraduate level.
