Download or read book Power System Fault Diagnosis written by Md Shafiullah and published by Elsevier. This book was released on 2022-01-14 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power System Fault Diagnosis: A Wide Area Measurement Based Intelligent Approach is a comprehensive overview of the growing interests in efficient diagnosis of power system faults to reduce outage duration and revenue losses by expediting the restoration process.This book illustrates intelligent fault diagnosis schemes for power system networks, at both transmission and distribution levels, using data acquired from phasor measurement units. It presents the power grid modeling, fault modeling, feature extraction processes, and various fault diagnosis techniques, including artificial intelligence techniques, in steps. The book also incorporates uncertainty associated with line parameters, fault information (resistance and inception angle), load demand, renewable energy generation, and measurement noises. Provides step-by-step modeling of power system networks (distribution and transmission) and faults in MATLAB/SIMULINK and real-time digital simulator (RTDS) platforms Presents feature extraction processes using advanced signal processing techniques (discrete wavelet and Stockwell transforms) and an easy-to-understand optimal feature selection method Illustrates comprehensive results in the graphical and tabular formats that can be easily reproduced by beginners Highlights various utility practices for fault location in transmission networks, distribution systems, and underground cables.
Download or read book Power System Fault Diagnosis written by Md Shafiullah and published by Elsevier. This book was released on 2022-01-20 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power System Fault Diagnosis: A Wide Area Measurement Based Intelligent Approach is a comprehensive overview of the growing interests in efficient diagnosis of power system faults to reduce outage duration and revenue losses by expediting the restoration process. This book illustrates intelligent fault diagnosis schemes for power system networks, at both transmission and distribution levels, using data acquired from phasor measurement units. It presents the power grid modeling, fault modeling, feature extraction processes, and various fault diagnosis techniques, including artificial intelligence techniques, in steps. The book also incorporates uncertainty associated with line parameters, fault information (resistance and inception angle), load demand, renewable energy generation, and measurement noises. Provides step-by-step modeling of power system networks (distribution and transmission) and faults in MATLAB/SIMULINK and real-time digital simulator (RTDS) platforms Presents feature extraction processes using advanced signal processing techniques (discrete wavelet and Stockwell transforms) and an easy-to-understand optimal feature selection method Illustrates comprehensive results in the graphical and tabular formats that can be easily reproduced by beginners Highlights various utility practices for fault location in transmission networks, distribution systems, and underground cables.
Download or read book Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems written by Hamid Reza Karimi and published by Elsevier. This book was released on 2021-06-14 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems gives a systematic description of the many facets of envisaging, designing, implementing, and experimentally exploring emerging trends in fault diagnosis and failure prognosis in mechanical, electrical, hydraulic and biomedical systems. The book is devoted to the development of mathematical methodologies for fault diagnosis and isolation, fault tolerant control, and failure prognosis problems of engineering systems. Sections present new techniques in reliability modeling, reliability analysis, reliability design, fault and failure detection, signal processing, and fault tolerant control of engineering systems. Sections focus on the development of mathematical methodologies for diagnosis and prognosis of faults or failures, providing a unified platform for understanding and applicability of advanced diagnosis and prognosis methodologies for improving reliability purposes in both theory and practice, such as vehicles, manufacturing systems, circuits, flights, biomedical systems. This book will be a valuable resource for different groups of readers - mechanical engineers working on vehicle systems, electrical engineers working on rotary machinery systems, control engineers working on fault detection systems, mathematicians and physician working on complex dynamics, and many more. Presents recent advances of theory, technological aspects, and applications of advanced diagnosis and prognosis methodologies in engineering applications Provides a series of the latest results, including fault detection, isolation, fault tolerant control, failure prognosis of components, and more Gives numerical and simulation results in each chapter to reflect engineering practices
Download or read book Signal Processing for Fault Detection and Diagnosis in Electric Machines and Systems written by Mohamed Benbouzid and published by IET. This book was released on 2020-12-09 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 5 chapters that discusses the following topics: Parametric signal processing approach; The signal demodulation techniques; Kullback-Leibler divergence for incipient fault diagnosis; Higher-order spectra and Fault detection and diagnosis based on principal component analysis.
Download or read book Issues of Fault Diagnosis for Dynamic Systems written by Ron J. Patton and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the time our first book Fault Diagnosis in Dynamic Systems: The ory and Applications was published in 1989 by Prentice Hall, there has been a surge in interest in research and applications into reliable methods for diag nosing faults in complex systems. The first book sold more than 1,200 copies and has become the main text in fault diagnosis for dynamic systems. This book will follow on this excellent record by focusing on some of the advances in this subject, by introducing new concepts in research and new application topics. The work cannot provide an exhaustive discussion of all the recent research in fault diagnosis for dynamic systems, but nevertheless serves to sample some of the major issues. It has been valuable once again to have the co-operation of experts throughout the world working in industry, gov emment establishments and academic institutions in writing the individual chapters. Sometimes dynamical systems have associated numerical models available in state space or in frequency domain format. When model infor mation is available, the quantitative model-based approach to fault diagnosis can be taken, using the mathematical model to generate analytically redun dant alternatives to the measured signals. When this approach is used, it becomes important to try to understand the limitations of the mathematical models i. e. , the extent to which model parameter variations occur and the effect of changing the systems point of operation.
Download or read book Performance Optimization of Fault Diagnosis Methods for Power Systems written by Dinghui Wu and published by Springer Nature. This book was released on 2022-09-18 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the performance optimization of fault diagnosis methods for power systems including both model-driven ones, such as the linear parameter varying algorithm, and data-driven ones, such as random matrix theory. Studies on fault diagnosis of power systems have long been the focus of electrical engineers and scientists. Pursuing a holistic approach to improve the accuracy and efficiency of existing methods, the underlying concepts toward several algorithms are introduced and then further applied in various situations for fault diagnosis of power systems in this book. The primary audience for the book would be the scholars and graduate students whose research topics including the control theory, applied mathematics, fault detection, and so on.
Download or read book Advanced Condition Monitoring and Fault Diagnosis of Electric Machines written by Irfan, Muhammad and published by IGI Global. This book was released on 2018-09-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability of induction motors is a major requirement in many industrial applications. It is especially important where an unexpected breakdown might result in the interruption of critical services such as military operations, transportation, aviation, and medical applications. Advanced Condition Monitoring and Fault Diagnosis of Electric Machines is a collection of innovative research on various issues related to machinery condition monitoring, signal processing and conditioning, instrumentation and measurements, and new trends in condition monitoring. It also pays special attention to the fault identification process. While highlighting topics including spectral analysis, electrical engineering, and bearing faults, this book is an ideal reference source for electrical engineers, mechanical engineers, researchers, and graduate-level students seeking current research on various methods of maintaining machinery.
Download or read book Fault Diagnosis Applications written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2011-04-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supervision, condition-monitoring, fault detection, fault diagnosis and fault management play an increasing role for technical processes and vehicles in order to improve reliability, availability, maintenance and lifetime. For safety-related processes fault-tolerant systems with redundancy are required in order to reach comprehensive system integrity. This book is a sequel of the book “Fault-Diagnosis Systems” published in 2006, where the basic methods were described. After a short introduction into fault-detection and fault-diagnosis methods the book shows how these methods can be applied for a selection of 20 real technical components and processes as examples, such as: Electrical drives (DC, AC) Electrical actuators Fluidic actuators (hydraulic, pneumatic) Centrifugal and reciprocating pumps Pipelines (leak detection) Industrial robots Machine tools (main and feed drive, drilling, milling, grinding) Heat exchangers Also realized fault-tolerant systems for electrical drives, actuators and sensors are presented. The book describes why and how the various signal-model-based and process-model-based methods were applied and which experimental results could be achieved. In several cases a combination of different methods was most successful. The book is dedicated to graduate students of electrical, mechanical, chemical engineering and computer science and for engineers.
Download or read book Application Of Wavelet Transform In Power System Fault Diagnosis written by Himadri Lala and published by OrangeBooks Publication. This book was released on 2024-06-27 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on my Master's in Engineering thesis.
Download or read book Computational Intelligence Applications to Power Systems written by Yong-Hua Song and published by Springer Science & Business Media. This book was released on 1996-11-30 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a thoroughly comprehensive treatment of computational intelligence from an electrical power system engineer's perspective. Thorough, well-organised and up-to-date, it examines in some detail all the important aspects of this very exciting and rapidly emerging technology, including: expert systems, fuzzy logic, artificial neural networks, genetic algorithms and hybrid systems. Written in a concise and flowing manner, by experts in the area of electrical power systems who have had many years of experience in the application of computational intelligence for solving many complex and onerous power system problems, this book is ideal for professional engineers and postgraduate students entering this exciting field. This book would also provide a good foundation for senior undergraduate students entering into their final year of study.
Download or read book Small World Stratification for Power System Fault Diagnosis written by Yixin Cai and published by . This book was released on 2010 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Detection and Diagnosis in Engineering Systems written by Janos Gertler and published by Routledge. This book was released on 2017-11-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring a model-based approach to fault detection and diagnosis in engineering systems, this book contains up-to-date, practical information on preventing product deterioration, performance degradation and major machinery damage.;College or university bookstores may order five or more copies at a special student price. Price is available upon request.
Download or read book Protective Relaying written by J. Lewis Blackburn and published by CRC Press. This book was released on 2014-02-11 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years, Protective Relaying: Principles and Applications has been the go-to text for gaining proficiency in the technological fundamentals of power system protection. Continuing in the bestselling tradition of the previous editions by the late J. Lewis Blackburn, the Fourth Edition retains the core concepts at the heart of power system analysis. Featuring refinements and additions to accommodate recent technological progress, the text: Explores developments in the creation of smarter, more flexible protective systems based on advances in the computational power of digital devices and the capabilities of communication systems that can be applied within the power grid Examines the regulations related to power system protection and how they impact the way protective relaying systems are designed, applied, set, and monitored Considers the evaluation of protective systems during system disturbances and describes the tools available for analysis Addresses the benefits and problems associated with applying microprocessor-based devices in protection schemes Contains an expanded discussion of intertie protection requirements at dispersed generation facilities Providing information on a mixture of old and new equipment, Protective Relaying: Principles and Applications, Fourth Edition reflects the present state of power systems currently in operation, making it a handy reference for practicing protection engineers. And yet its challenging end-of-chapter problems, coverage of the basic mathematical requirements for fault analysis, and real-world examples ensure engineering students receive a practical, effective education on protective systems. Plus, with the inclusion of a solutions manual and figure slides with qualifying course adoption, the Fourth Edition is ready-made for classroom implementation.
Download or read book Model Based Fault Diagnosis Techniques written by Steven X. Ding and published by Springer Science & Business Media. This book was released on 2012-12-20 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guaranteeing a high system performance over a wide operating range is an important issue surrounding the design of automatic control systems with successively increasing complexity. As a key technology in the search for a solution, advanced fault detection and identification (FDI) is receiving considerable attention. This book introduces basic model-based FDI schemes, advanced analysis and design algorithms, and mathematical and control-theoretic tools. This second edition of Model-Based Fault Diagnosis Techniques contains: • new material on fault isolation and identification and alarm management; • extended and revised treatment of systematic threshold determination for systems with both deterministic unknown inputs and stochastic noises; • addition of the continuously-stirred tank heater as a representative process-industrial benchmark; and • enhanced discussion of residual evaluation which now deals with stochastic processes. Model-based Fault Diagnosis Techniques will interest academic researchers working in fault identification and diagnosis and as a text it is suitable for graduate students in a formal university-based course or as a self-study aid for practising engineers working with automatic control or mechatronic systems from backgrounds as diverse as chemical process and power engineering.
Download or read book Photovoltaic Systems written by K.Mohana Sundaram and published by CRC Press. This book was released on 2022-03-07 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive insight into the fault detection techniques implemented for photovoltaic (PV) panels. It includes studies related to predictive maintenance needed to improve the performance of the solar PV systems using Artificial Intelligence (AI) techniques. The readers gain knowledge on the fault identification algorithm and the significance of all such algorithms in real-time power system applications. Gives detailed overview of fundamental concepts of fault diagnosis algorithm for solar PV system Explains AC and DC side of the solar PV system-based electricity generation with real-time examples Covers effective extraction of the energy from solar radiation Illustrates artificial intelligence techniques for detecting the faults occurring in the solar PV system Includes MATLAB® based simulations and results on fault diagnosis including case studies This book is aimed at researchers, professionals and graduate students in electrical engineering, artificial intelligence, control algorithms, energy engineering, photovoltaic systems, industrial electronics.
Download or read book System Fault Diagnostics Reliability and Related Knowledge Based Approaches written by S.G. Tzafestas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Induction Motor Fault Diagnosis written by Subrata Karmakar and published by Springer. This book was released on 2016-04-04 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the diagnosis and assessment of the various faults which can occur in a three phase induction motor, namely rotor broken-bar faults, rotor-mass unbalance faults, stator winding faults, single phasing faults and crawling. Following a brief introduction, the second chapter describes the construction and operation of an induction motor, then reviews the range of known motor faults, some existing techniques for fault analysis, and some useful signal processing techniques. It includes an extensive literature survey to establish the research trends in induction motor fault analysis. Chapters three to seven describe the assessment of each of the five primary fault types. In the third chapter the rotor broken-bar fault is discussed and then two methods of diagnosis are described; (i) diagnosis of the fault through Radar analysis of stator current Concordia and (ii) diagnosis through envelope analysis of motor startup current using Hilbert and Wavelet Transforms. In chapter four, rotor-mass unbalance faults are assessed, and diagnosis of both transient and steady state stator current has been analyzed using different techniques. If both rotor broken-bar and rotor-mass unbalance faults occur simultaneously then for identification an algorithm is provided in this chapter. Chapter five considers stator winding faults and five different analysis techniques, chapter six covers diagnosis of single phasing faults, and chapter seven describes crawling and its diagnosis. Finally, chapter eight focuses on fault assessment, and presents a summary of the book together with a discussion of prospects for future research on fault diagnosis.
