Download or read book Power Switching in Digital Systems written by Rodger A. Cliff and published by . This book was released on 1966 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Digital Systems written by John Crisp and published by Elsevier. This book was released on 2000-02-24 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Digital Systems introduces digital electronics from first principles and goes on to cover all the main areas of knowledge and expertise needed by students up to first year degree level, as well as technicians and other professionals. Unlike most texts, Introduction to Digital Systems also covers the practicalities of designing and building circuits, including fault-finding and use of test equipment. Students will find the text ideally matched for courses covering electronics, systems and control, and electronic servicing. Whether you are looking for a complete self-study course in digital electronics, a concise reference text to dip into or a course text that is readable and straightforward, John Crisp has provided the solution. - A concise, readable introductory text ideal for self-study by professionals or students on courses with limited contact time - Covers the practical side from a technician/professional viewpoint - Content carefully matched to a range of BTEC and C&G syllabuses
Download or read book The Switching Function written by C.C. Marouchos and published by IET. This book was released on 2006 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This new book demonstrates the usefulness of the switching function in analyzing power electronic circuits in the steady state. A procedure is suggested for the effective application of this method for the analysis of all types of power electronic circuits."--BOOK JACKET.
Download or read book Digital Switching Systems written by Syed Riffat Ali and published by McGraw-Hill Professional Publishing. This book was released on 1998 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition, the book develops a generic digital switching system model that enables even the most inexperienced telecommunications engineers to quickly comprehend the basic architecture and functionally of digital switching systems.
Download or read book Digital Systems Engineering written by William J. Dally and published by Cambridge University Press. This book was released on 2008-04-24 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: What makes some computers slow? Why do some digital systems operate reliably for years while others fail mysteriously every few hours? How can some systems dissipate kilowatts while others operate off batteries? These questions of speed, reliability, and power are all determined by the system-level electrical design of a digital system. Digital Systems Engineering presents a comprehensive treatment of these topics. It combines a rigorous development of the fundamental principles in each area with real-world examples of circuits and methods. The book not only serves as an undergraduate textbook, filling the gap between circuit design and logic design, but can also help practising digital designers keep pace with the speed and power of modern integrated circuits. The techniques described in this book, once used only in supercomputers, are essential to the correct and efficient operation of any type of digital system.
Download or read book Digital Principles Switching Theory written by A. K. Singh and published by New Age International. This book was released on 2006 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text fulfills the course requirement on the subject of Switching Theory and Digital Circuit Design for B. Tech. degree course in Electronics, Computer Science and Technology, Electronic & Communication, Electronic & Electrical, Electronic & Instrumentation, Electronic Instrumentation & Control, Instrumentation & Control Engineering of U.P. Technical University, Lucknow and other Technical Universities of India. It will also serve as a useful reference book for competitive examinations. All the topics are illustrated with clear diagram and simple language is used throughout the text to facilitate easy understanding of the concepts. There is no special pre-requisite before starting this book. Each chapter of the book starts with simple facts and concepts, and traverse through the examples and figures.
Download or read book Direct Digital Control of Switching in Power Network Systems written by S. K. Banerjee and published by . This book was released on 1968 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Systems and Applications written by Vojin G. Oklobdzija and published by CRC Press. This book was released on 2017-12-19 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: New design architectures in computer systems have surpassed industry expectations. Limits, which were once thought of as fundamental, have now been broken. Digital Systems and Applications details these innovations in systems design as well as cutting-edge applications that are emerging to take advantage of the fields increasingly sophisticated capabilities. This book features new chapters on parallelizing iterative heuristics, stream and wireless processors, and lightweight embedded systems. This fundamental text— Provides a clear focus on computer systems, architecture, and applications Takes a top-level view of system organization before moving on to architectural and organizational concepts such as superscalar and vector processor, VLIW architecture, as well as new trends in multithreading and multiprocessing. includes an entire section dedicated to embedded systems and their applications Discusses topics such as digital signal processing applications, circuit implementation aspects, parallel I/O algorithms, and operating systems Concludes with a look at new and future directions in computing Features articles that describe diverse aspects of computer usage and potentials for use Details implementation and performance-enhancing techniques such as branch prediction, register renaming, and virtual memory Includes a section on new directions in computing and their penetration into many new fields and aspects of our daily lives
Download or read book Low Power Digital VLSI Design written by Abdellatif Bellaouar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power Digital VLSI Design: Circuits and Systems addresses both process technologies and device modeling. Power dissipation in CMOS circuits, several practical circuit examples, and low-power techniques are discussed. Low-voltage issues for digital CMOS and BiCMOS circuits are emphasized. The book also provides an extensive study of advanced CMOS subsystem design. A low-power design methodology is presented with various power minimization techniques at the circuit, logic, architecture and algorithm levels. Features: Low-voltage CMOS device modeling, technology files, design rules Switching activity concept, low-power guidelines to engineering practice Pass-transistor logic families Power dissipation of I/O circuits Multi- and low-VT CMOS logic, static power reduction circuit techniques State of the art design of low-voltage BiCMOS and CMOS circuits Low-power techniques in CMOS SRAMS and DRAMS Low-power on-chip voltage down converter design Numerous advanced CMOS subsystems (e.g. adders, multipliers, data path, memories, regular structures, phase-locked loops) with several design options trading power, delay and area Low-power design methodology, power estimation techniques Power reduction techniques at the logic, architecture and algorithm levels More than 190 circuits explained at the transistor level.
Download or read book Digital Power Electronics and Applications written by Fang Lin Luo and published by Elsevier. This book was released on 2010-07-20 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to describe the theory of Digital Power Electronics and its applications. The authors apply digital control theory to power electronics in a manner thoroughly different from the traditional, analog control scheme. In order to apply digital control theory to power electronics, the authors define a number of new parameters, including the energy factor, pumping energy, stored energy, time constant, and damping time constant. These parameters differ from traditional parameters such as the power factor, power transfer efficiency, ripple factor, and total harmonic distortion. These new parameters result in the definition of new mathematical modeling: • A zero-order-hold (ZOH) is used to simulate all AC/DC rectifiers. • A first-order-hold (FOH) is used to simulate all DC/AC inverters. • A second-order-hold (SOH) is used to simulate all DC/DC converters. • A first-order-hold (FOH) is used to simulate all AC/AC (AC/DC/AC) converters. Presents most up-to-date methods of analysis and control algorithms for developing power electronic converters and power switching circuits Provides an invaluable reference for engineers designing power converters, commercial power supplies, control systems for motor drives, active filters, etc. Presents methods of analysis not available in other books
Download or read book Signal Integrity and Radiated Emission of High Speed Digital Systems written by Spartaco Caniggia and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before putting digital systems for information technology or telecommunication applications on the market, an essential requirement is to perform tests in order to comply with the limits of radiated emission imposed by the standards. This book provides an investigation into signal integrity (SI) and electromagnetic interference (EMI) problems. Topics such as reflections, crosstalk, switching noise and radiated emission (RE) in high-speed digital systems are covered, which are essential for IT and telecoms applications. The highly important topic of modelling is covered which can reduce costs by enabling simulation data to demonstrate that a product meets design specifications and regulatory limits. According to the new European EMC directive, this can help to avoid the expensive use of large semi-anechoic chambers or open area test sites for radiated emission assessments. Following a short introduction to signalling and radiated interference in digital systems, the book provides a detailed characterization of logic families in terms of static and dynamic characteristic useful for modelling techniques. Crosstalk in multi-coupled line structures are investigated by analytical, graphical and circuit-based methods, and techniques to mitigate these phenomena are provided. Grounding, filtering and shielding with multilayer PCBs are also examined and design rules given. Written by authors with extensive experience in industry and academia. Explains basic conceptual problems from a theoretical and practical point of view by using numerous measurements and simulations. Presents models for mathematical and SPICE-like circuit simulators. Provides examples of using full-wave codes for SI and RE investigations. Companion website containing lists of codes and sample material. Signal Integrity and Radiated Emission of High-Speed Digital Systems is a valuable resource to industrial designers of information technology, telecommunication equipment and automation equipment as well as to development engineers. It will also be of interest to managers and designers of consumer electronics, and researchers in electronics.
Download or read book Essentials of Computer Architecture written by Douglas Comer and published by CRC Press. This book was released on 2017-01-06 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy to read textbook provides an introduction to computer architecture, while focusing on the essential aspects of hardware that programmers need to know. The topics are explained from a programmer’s point of view, and the text emphasizes consequences for programmers. Divided in five parts, the book covers the basics of digital logic, gates, and data paths, as well as the three primary aspects of architecture: processors, memories, and I/O systems. The book also covers advanced topics of parallelism, pipelining, power and energy, and performance. A hands-on lab is also included. The second edition contains three new chapters as well as changes and updates throughout.
Download or read book Electromagnetic Transients of Power Electronics Systems written by Zhengming Zhao and published by Springer. This book was released on 2019-02-20 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses topics related to power electronics, especially electromagnetic transient analysis and control of high-power electronics conversion. It focuses on the re-evaluation of power electronics, transient analysis and modeling, device-based system-safe operating area, and energy balance-based control methods, and presenting, for the first time, numerous experimental results for the transient process of various real-world converters. The book systematically presents both theoretical analysis and practical applications. The first chapter discusses the structure and attributes of power electronics systems, highlighting the analysis and synthesis, while the second chapter explores the transient process and modeling for power electronics systems. The transient features of power devices at switching-on/off, transient conversion circuit with stray parameters and device-based system-safe operating area are described in the subsequent three chapters. The book also examines the measurement of transient processes, electromagnetic pulses and their series, as well as high-performance, closed-loop control, and expounds the basic principles and method of the energy-balanced control strategy. Lastly, it introduces the applications of transient analysis of typical power electronics systems. The book is valuable as a textbook for college students, and as a reference resource for electrical engineers as well as anyone working in the field of high-power electronics system.
Download or read book Rapid Prototyping of Digital Systems written by James O. Hamblen and published by Springer Science & Business Media. This book was released on 2007-10-31 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a laboratory workbook filled with interesting and challenging projects for digital logic design and embedded systems classes. The workbook introduces you to fully integrated modern CAD tools, logic simulation, logic synthesis using hardware description languages, design hierarchy, current generation field programmable gate array technology, and SoPC design. Projects cover such areas as serial communications, state machines with video output, video games and graphics, robotics, pipelined RISC processor cores, and designing computer systems using a commercial processor core.
Download or read book Technical Abstracts written by Goddard Space Flight Center and published by . This book was released on 1962 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Digital Systems written by Mohammed Ferdjallah and published by John Wiley & Sons. This book was released on 2011-06-15 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique guide to using both modeling and simulation in digital systems design Digital systems design requires rigorous modeling and simulation analysis that eliminates design risks and potential harm to users. Introduction to Digital Systems: Modeling, Synthesis, and Simulation Using VHDL introduces the application of modeling and synthesis in the effective design of digital systems and explains applicable analytical and computational methods. Through step-by-step explanations and numerous examples, the author equips readers with the tools needed to model, synthesize, and simulate digital principles using Very High Speed Integrated Circuit Hardware Description Language (VHDL) programming. Extensively classroom-tested to ensure a fluid presentation, this book provides a comprehensive overview of the topic by integrating theoretical principles, discrete mathematical models, computer simulations, and basic methods of analysis. Topical coverage includes: Digital systems modeling and simulation Integrated logic Boolean algebra and logic Logic function optimization Number systems Combinational logic VHDL design concepts Sequential and synchronous sequential logic Each chapter begins with learning objectives that outline key concepts that follow, and all discussions conclude with problem sets that allow readers to test their comprehension of the presented material. Throughout the book, VHDL sample codes are used to illustrate circuit design, providing guidance not only on how to learn and master VHDL programming, but also how to model and simulate digital circuits. Introduction to Digital Systems is an excellent book for courses in modeling and simulation, operations research, engineering, and computer science at the upper-undergraduate and graduate levels. The book also serves as a valuable resource for researchers and practitioners in the fields of operations research, mathematical modeling, simulation, electrical engineering, and computer science.
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 1981 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
