Download or read book POWER PLANT INSTRUMENTATION written by K. KRISHNASWAMY and published by PHI Learning Pvt. Ltd.. This book was released on 2013-08-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this text presents an overview of power generation and discusses the different types of equipment used in a steam thermal power generation unit. The book describes various conventional and non-conventional energy sources. It elaborates on the instrumentation and control of water-steam and fuel-air flue gas circuits along with optimization of combustion. The text also deals with the power plant management system including the combustion process, boiler efficiency calculation, and maintenance and safety aspects. In addition, the book explains Supervisory Control and Data Acquisition (SCADA) system as well as turbine monitoring and control. This book is designed for the undergraduate students of electronics and instrumentation engineering and electrical and electronics engineering. New To This Edition • A new chapter on Nuclear Power Plant Instrumentation is added, which elaborates how electricity is generated in a Nuclear Power Plant. Key Features • Includes numerous figures to clarify the concepts. • Gives a number of worked-out problems to help students enhance their learning skills. • Provides chapter-end exercises to enable students to test their understanding of the subject.

Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.

Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by Yastrebenetsky, Michael and published by IGI Global. This book was released on 2014-02-28 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.

Download or read book Power plant Control and Instrumentation written by David Lindsley and published by IET. This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes control systems for boilers and heat-recovery steam generators (HRSGs) in a variety of applications, from waste-to-energy plants to combined-cycle gas-turbine power stations. Basics such as methods of connecting instruments are explained, and more advanced discussions of design features of distributed control systems are also included. At every stage, emphasis is given to the interactive nature of plants and to troubleshooting and problem solving. Includes chapter summaries. The author is Fellow of the Institution of Electrical Engineers, and the Institute of Marine Engineers, and is a Senior Member of the Instrument Society of America. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Thermal Power Plant Control and Instrumentation written by David Lindsley and published by . This book was released on 2018 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power-plant Control and Instrumentation, 2nd edition - contents include a wide variety of plant and combustion arrangements, from smaller boiler systems to full-scale generators, common principles, commercial aspects, measurement, and key techniques such as cogeneration and combined cycle.

Download or read book Power Plant Instrumentation and Controls written by Philip Kiameh and published by McGraw-Hill Professional. This book was released on 2014-02 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to increasing power plant operating uptime and profitability Power Plant Instrumentation and Controls provides a detailed description of power plant computer simulation and modern instrumentation and control systems that allow improvements in online power plant operating periods and thus profitability – minimizing unnecessary outages, maintenance activities, and downtime. The book reviews the many benefits of these different computer simulation programs, modern instrumentation, and control systems as they relate to plant safety, reliability, costs, efficiency, and emissions. It focuses on modern power generating plants – gas turbines, co-generation, and combined cycle plants. The book features a simulation program to determine the effects on turbine performance; turbine creep life; environmental emissions; and turbine life-cycle cost, revenue, and profitability of the following parameters: Variations in ambient temperature and pressure Inlet and exhaust losses Engine deterioration Different faults Power augmentation methods, including peak mode Water injection Control system performance, including proportional offset, integral windup, and trips Fuel type Variations in maintenance techniques and frequency Power generating plant outages are often due to unnecessary and improper maintenance activities and poor or outdated instrumentation and control systems, resulting in a significant reduction in profitability of power plant operation. This authoritative volume addresses these concerns and offers proven solutions. It is an essential next step to Kiameh's successful Power Generation Handbook and Power Plant Equipment Operation and Maintenance Guide. Power Plant Instrumentation and Controls includes Bar charts trending key turbine parameters Bar charts trending compressor characteristics and operating point during engine transients Tips for exporting simulated data to other software, such as Excel Exercises to illustrate use of simulation programs under different scenarios, including modern co-generation and combined-cycle plants In-depth coverage of smart instrumentation and advanced control systems used in modern power generating plants Details on selecting, commissioning, operating, diagnosing, and testing smart instrumentation, Distributed Control Systems, Supervisory Control and Data Acquisition (SCADA) systems, and all types of control valves, actuators, and positioners

Download or read book Purdy s Instrument Handbook written by Ralph G. Dewey and published by Glen Enterprises. This book was released on 1996-12-01 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plant Hazard Analysis and Safety Instrumentation Systems written by Swapan Basu and published by Academic Press. This book was released on 2016-10-21 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Hazard Analysis and Safety Instrumentation Systems is the first book to combine coverage of these two integral aspects of running a chemical processing plant. It helps engineers from various disciplines learn how various analysis techniques, international standards, and instrumentation and controls provide layers of protection for basic process control systems, and how, as a result, overall system reliability, availability, dependability, and maintainability can be increased. This step-by-step guide takes readers through the development of safety instrumented systems, also including discussions on cost impact, basics of statistics, and reliability. Swapan Basu brings more than 35 years of industrial experience to this book, using practical examples to demonstrate concepts. Basu links between the SIS requirements and process hazard analysis in order to complete SIS lifecycle implementation and covers safety analysis and realization in control systems, with up-to-date descriptions of modern concepts, such as SIL, SIS, and Fault Tolerance to name a few. In addition, the book addresses security issues that are particularly important for the programmable systems in modern plants, and discusses, at length, hazardous atmospheres and their impact on electrical enclosures and the use of IS circuits. - Helps the reader identify which hazard analysis method is the most appropriate (covers ALARP, HAZOP, FMEA, LOPA) - Provides tactics on how to implement standards, such as IEC 61508/61511 and ANSI/ISA 84 - Presents information on how to conduct safety analysis and realization in control systems and safety instrumentation

Download or read book Verification and Validation of Software Related to Nuclear Power Plant Instrumentation and Control written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides practical guidance on the methods available for verification of the software and validation of computer based systems in nuclear power plants, and on how and when these methods can be effectively applied. It will be of particular interest to all those involved in the development, implementation, maintenance and use of software and computer based instrumentation and control systems in nuclear power plants.

Download or read book Managing Modernization of Nuclear Power Plant Instrumentation and Control Systems written by International Atomic Energy Agency and published by . This book was released on 2004 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all of the management activities related to modernization of I&C systems in nuclear power plants, including the evaluation of all I&C systems to determine which can be successfully maintained and which need to be modernized.

Download or read book Steam Turbine Generators Process Control and Diagnostics written by Udo Sill and published by Publicis. This book was released on 1996-12-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve the highest level of availability and cost-effectiveness the steam turbine generator set in power plants must be operated professionally at optimum thermodynamic performance. The modern I&C equipment (Instrumentation & Control) of Siemens Power Generation (KWU) and the on-line diagnostic system DIGEST help accomplish this by providing a comprehensive overview of the operating status and by analyzing the condition of the steam turbine generator set during operation. This equipment enables the early detection of incipient faults and lowers the burden of the operating crew. This book provides a broad overview of the state-of-the-art of I&C equipment and the use of diagnostic systems. The target group for this book are power plant operators, planning engineers and consultants.

Download or read book Power Plant Instrumentation and Control Handbook written by Swapan Basu and published by Academic Press. This book was released on 2019-06-09 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Plant Instrumentation and Control Handbook, Second Edition, provides a contemporary resource on the practical monitoring of power plant operation, with a focus on efficiency, reliability, accuracy, cost and safety. It includes comprehensive listings of operating values and ranges of parameters for temperature, pressure, flow and levels of both conventional thermal power plant and combined/cogen plants, supercritical plants and once-through boilers. It is updated to include tables, charts and figures from advanced plants in operation or pilot stage. Practicing engineers, freshers, advanced students and researchers will benefit from discussions on advanced instrumentation with specific reference to thermal power generation and operations. New topics in this updated edition include plant safety lifecycles and safety integrity levels, advanced ultra-supercritical plants with advanced firing systems and associated auxiliaries, integrated gasification combined cycle (IGCC) and integrated gasification fuel cells (IGFC), advanced control systems, and safety lifecycle and safety integrated systems. - Covers systems in use in a wide range of power plants: conventional thermal power plants, combined/cogen plants, supercritical plants, and once through boilers - Presents practical design aspects and current trends in instrumentation - Discusses why and how to change control strategies when systems are updated/changed - Provides instrumentation selection techniques based on operating parameters. Spec sheets are included for each type of instrument - Consistent with current professional practice in North America, Europe, and India - All-new coverage of Plant safety lifecycles and Safety Integrity Levels - Discusses control and instrumentation systems deployed for the next generation of A-USC and IGCC plants

Download or read book Elements of Electrical Power Station Design written by M. V. Deshpande and published by PHI Learning Pvt. Ltd.. This book was released on 2009-12-30 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers preliminary designs and economic loading of diesel-electric stations, steam stations, nuclear power stations and hydro-electric stations. It discusses load forecasting, economic load dispatch, unit commitment problem, methods of scheduling stations, allocation control, system reliability and system security. Trends in power plant instrumentation and control are also presented.

Download or read book Basic Electrical and Instrumentation Engineering written by P. Sivaraman and published by John Wiley & Sons. This book was released on 2021-01-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical and instrumentation engineering is changing rapidly, and it is important for the veteran engineer in the field not only to have a valuable and reliable reference work which he or she can consult for basic concepts, but also to be up to date on any changes to basic equipment or processes that might have occurred in the field. Covering all of the basic concepts, from three-phase power supply and its various types of connection and conversion, to power equation and discussions of the protection of power system, to transformers, voltage regulation, and many other concepts, this volume is the one-stop, "go to" for all of the engineer's questions on basic electrical and instrumentation engineering. There are chapters covering the construction and working principle of the DC machine, all varieties of motors, fundamental concepts and operating principles of measuring, and instrumentation, both from a "high end" point of view and the point of view of developing countries, emphasizing low-cost methods. A valuable reference for engineers, scientists, chemists, and students, this volume is applicable to many different fields, across many different industries, at all levels. It is a must-have for any library.

Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Systems for Nuclear Power Plants written by Dr. Omar S. Mazzoni and published by John Wiley & Sons. This book was released on 2018-10-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all aspects of electrical systems for nuclear power plants written by an authority in the field Based on author Omar Mazzoni's notes for a graduate level course he taught in Electrical Engineering, this book discusses all aspects of electrical systems for nuclear power plants, making reference to IEEE nuclear standards and regulatory documents. It covers such important topics as the requirements for equipment qualification, acceptance testing, periodic surveillance, and operational issues. It also provides excellent guidance for students in understanding the basis of nuclear plant electrical systems, the industry standards that are applicable, and the Nuclear Regulatory Commission's rules for designing and operating nuclear plants. Electrical Systems for Nuclear Power Plants offers in-depth chapters covering: elements of a power system; special regulations and requirements; unique requirements of a Class 1E power system; nuclear plants containment electrical penetration assemblies; on-site emergency AC sources; on-site emergency DC sources; protective relaying; interface of the nuclear plant with the grid; station blackout (SBO) issues and regulations; review of electric power calculations; equipment aging and decommissioning; and electrical and control systems inspections. This valuable resource: Evaluates industry standards and their relationship to federal regulations Discusses Class 1E equipment, emergency generation, the single failure criterion, plant life, and plant inspection Includes exercise problems for each chapter Electrical Systems for Nuclear Power Plants is an ideal text for instructors and students in electrical power courses, as well as for engineers active in operating nuclear power plants.

Download or read book Thermal Power Plant Simulation and Control written by Damian Flynn and published by IET. This book was released on 2003-08-18 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of how advances in computing technology and research can be combined to extend the capabilities and economics of modern power plants. The contributors, from academia as well as practising engineers, illustrate how the various methodologies can be applied to power plant operation.