Download or read book Power Quality Analyzers and Monitors written by Dr. Hedaya Alasooly and published by BookRix. This book was released on 2020-08-10 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Quality can be defined as the characteristics of the electricity at a given point on an electrical system, evaluated against a set of reference technical parameters. These parameters might relate to the compatibility between electricity supplied on a network and the loads connected to that network. The voltage waveform is normally distorted, and we have the so called Power Quality disturbances such as; voltage dips/swells, transients, harmonics and voltage unbalance amongst others. The study of Power Quality encompasses the Power Quality disturbances, as well as Power Quality standards, and Power Quality Monitoring. This project will tackle the subject of Power Quality, Power Quality Disturbances, Power Quality Standards as well as Power Quality Monitoring. A general description of each of the disturbances will be given, and the basic techniques which are used to mitigate that disturbance so as to improve the quality of the supply are presented.

Download or read book Handbook of Power Quality written by Angelo Baggini and published by John Wiley & Sons. This book was released on 2008-07-31 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the complexity of power systems combined with other factors such as increasing susceptibility of equipment, power quality (PQ) is apt to waver. With electricity in growing demand, low PQ is on the rise and becoming notoriously difficult to remedy. It is an issue that confronts professionals on a daily basis, but few have the required knowledge to diagnose and solve these problems. Handbook of Power Quality examines of the full panorama of PQ disturbances, with background theory and guidelines on measurement procedures and problem solving. It uses the perspectives of both power suppliers and electricity users, with contributions from experts in all aspects of PQ supplying a vital balance of scientific and practical information on the following: frequency variations; the characteristics of voltage, including dips, fluctuations and flicker; the continuity and reliability of electricity supply, its structure, appliances and equipment; the relationship of PQ with power systems, distributed generation, and the electricity market; the monitoring and cost of poor PQ; rational use of energy. An accompanying website hosts case studies for each chapter, demonstrating PQ practice; how problems are identified, analysed and resolved. The website also includes extensive appendices listing the current standards, mathematical formulas, and principles of electrical circuits that are critical for the optimization of solutions. This comprehensive handbook explains PQ methodology with a hands-on approach that makes it essential for all practising power systems engineers and researchers. It simultaneously acts as a reference for electrical engineers and technical managers who meet with power quality issues and would like to further their knowledge in this area.

Download or read book Power Quality written by Ahmed F. Zobaa and published by BoD – Books on Demand. This book was released on 2011-09-22 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on power quality written by experts from industries and academics from various counties will be of great benefit to professionals, engineers and researchers. This book covers various aspects of power quality monitoring, analysis and power quality enhancement in transmission and distribution systems. Some of the key features of books are as follows: Wavelet and PCA to Power Quality Disturbance Classification applying a RBF Network; Power Quality Monitoring in a System with Distributed and Renewable Energy Sources; Signal Processing Application of Power Quality Monitoring; Pre-processing Tools and Intelligent Techniques for Power Quality Analysis; Single-Point Methods for Location of Distortion, Unbalance, Voltage Fluctuation and Dips Sources in a Power System; S-transform Based Novel Indices for Power Quality Disturbances; Load Balancing in a Three-Phase Network by Reactive Power Compensation; Compensation of Reactive Power and Sag Voltage using Superconducting Magnetic Energy Storage; Optimal Location and Control of Flexible Three Phase Shunt FACTS to Enhance Power Quality in Unbalanced Electrical Network; Performance of Modification of a Three Phase Dynamic Voltage Restorer (DVR) for Voltage Quality Improvement in Distribution System; Voltage Sag Mitigation by Network Reconfiguration; Intelligent Techniques for Power Quality Enhancement in Distribution Systems.

Download or read book Analysis for Power Quality Monitoring written by Juan-José González de la Rosa and published by MDPI. This book was released on 2020-05-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are immersed in the so-called digital energy network, continuously introducing new technological advances for a better way of life. Numerous emerging words are in the spotlight, namely: Internet of Things (IoT), Big Data, Smart Cities, Smart Grid, Industry 4.0, etc. To achieve this formidable goal, systems should work more efficiently, and this fact inevitably leads to power quality (PQ) assurance. Apart from its economic losses, a bad PQ implies serious risks for machines, and consequently for people. Many researchers are endeavoring to develop new analysis techniques, instruments, measurement methods, and new indices and norms that match and fulfil the requirements regarding the current operation of the electrical network. This book offers a compilation of the some recent advances in this field. The chapters range from computing issues to technological implementations, going through event detection strategies and new indices and measurement methods that contribute significantly to the advancement of PQ analysis. Experiments have been developed within the frames of research units and projects, and deal with real data from industry and public buildings. Human beings have an unavoidable commitment with sustainability, which implies adapting PQ monitoring techniques to our dynamic world, defining a digital and smart concept of quality for electricity.

Download or read book Power Quality written by Bhim Singh and published by John Wiley & Sons. This book was released on 2014-12-12 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining a stable level of power quality in the distribution network is a growing challenge due to increased use of power electronics converters in domestic, commercial and industrial sectors. Power quality deterioration is manifested in increased losses; poor utilization of distribution systems; mal-operation of sensitive equipment and disturbances to nearby consumers, protective devices, and communication systems. However, as the energy-saving benefits will result in increased AC power processed through power electronics converters, there is a compelling need for improved understanding of mitigation techniques for power quality problems. This timely book comprehensively identifies, classifies, analyses and quantifies all associated power quality problems, including the direct integration of renewable energy sources in the distribution system, and systematically delivers mitigation techniques to overcome these problems. Key features: • Emphasis on in-depth learning of the latest topics in power quality extensively illustrated with waveforms and phasor diagrams. • Essential theory supported by solved numerical examples, review questions, and unsolved numerical problems to reinforce understanding. • Companion website contains solutions to unsolved numerical problems, providing hands-on experience. Senior undergraduate and graduate electrical engineering students and instructors will find this an invaluable resource for education in the field of power quality. It will also support continuing professional development for practicing engineers in distribution and transmission system operators.

Download or read book Power Quality in Modern Power Systems written by Sanjeevikumar Padmanaban and published by Academic Press. This book was released on 2020-11-20 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Quality in Modern Power Systems presents an overview of power quality problems in electrical power systems, for identifying pitfalls and applying the fundamental concepts for tackling and maintaining the electrical power quality standards in power systems. It covers the recent trends and emerging topics of power quality in large scale renewable energy integration, electric vehicle charging stations, voltage control in active distribution network and solutions to integrate large scale renewable energy into the electric grid with several case studies and real-time examples for power quality assessments and mitigations measures. This book will be a practical guide for graduate and post graduate students of electrical engineering, engineering professionals, researchers and consultants working in the area of power quality. - Explains the power quality characteristics through suitable real time measurements and simulation examples - Explanations for harmonics with various real time measurements are included - Simulation of various power quality events using PSCAD and MATLAB software - PQ disturbance detection and classification through advanced signal processing and machine learning tools - Overview about power quality problems associated with renewable energy integration, electric vehicle supply equipment's, residential systems using several case studies

Download or read book Power Quality written by Antonio Moreno-Muñoz and published by Springer Science & Business Media. This book was released on 2007-05-01 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a solid theoretical foundation of the modern mitigation technologies employed in the power quality arena, and provides an overview of the most recent challenges in this field. The book introduces the advanced concepts associated with power quality to engineers and students. It will make an excellent reference for facility electrical power engineers and maintenance technicians.

Download or read book Power Quality Enhancement Using Custom Power Devices written by Arindam Ghosh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Quality Enhancement Using Custom Power Devices considers the structure, control and performance of series compensating DVR, the shunt DSTATCOM and the shunt with series UPQC for power quality improvement in electricity distribution. Also addressed are other power electronic devices for improving power quality in Solid State Transfer Switches and Fault Current Limiters. Applications for these technologies as they relate to compensating busses supplied by a weak line and for distributed generation connections in rural networks, are included. In depth treatment of inverters to achieve voltage support, voltage balancing, harmonic suppression and transient suppression in realistic network environments are also covered. New material on the potential for shunt and series compensation which emphasizes the importance of control design has been introduced.

Download or read book Power Quality in Power Systems and Electrical Machines written by Ewald F. Fuchs and published by Academic Press. This book was released on 2015-07-14 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this must-have reference covers power quality issues in four parts, including new discussions related to renewable energy systems. The first part of the book provides background on causes, effects, standards, and measurements of power quality and harmonics. Once the basics are established the authors move on to harmonic modeling of power systems, including components and apparatus (electric machines). The final part of the book is devoted to power quality mitigation approaches and devices, and the fourth part extends the analysis to power quality solutions for renewable energy systems. Throughout the book worked examples and exercises provide practical applications, and tables, charts, and graphs offer useful data for the modeling and analysis of power quality issues. - Provides theoretical and practical insight into power quality problems of electric machines and systems - 134 practical application (example) problems with solutions - 125 problems at the end of chapters dealing with practical applications - 924 references, mostly journal articles and conference papers, as well as national and international standards and guidelines

Download or read book Analysis for Power Quality Monitoring written by Juan-José González de la Rosa and published by . This book was released on 2020 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are immersed in the so-called digital energy network, continuously introducing new technological advances for a better way of life. Numerous emerging words are in the spotlight, namely: Internet of Things (IoT), Big Data, Smart Cities, Smart Grid, Industry 4.0, etc. To achieve this formidable goal, systems should work more efficiently, and this fact inevitably leads to power quality (PQ) assurance. Apart from its economic losses, a bad PQ implies serious risks for machines, and consequently for people. Many researchers are endeavoring to develop new analysis techniques, instruments, measurement methods, and new indices and norms that match and fulfil the requirements regarding the current operation of the electrical network. This book offers a compilation of the some recent advances in this field. The chapters range from computing issues to technological implementations, going through event detection strategies and new indices and measurement methods that contribute significantly to the advancement of PQ analysis. Experiments have been developed within the frames of research units and projects, and deal with real data from industry and public buildings. Human beings have an unavoidable commitment with sustainability, which implies adapting PQ monitoring techniques to our dynamic world, defining a digital and smart concept of quality for electricity.

Download or read book Modeling Power Electronics and Interfacing Energy Conversion Systems written by M. Godoy Simoes and published by John Wiley & Sons. This book was released on 2016-09-16 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work. Discusses the mathematical formulation of system equations for energy systems and power electronics aiming state-space and circuit oriented simulations Studies the interactions between MATLAB and Simulink models and functions with real-world implementation using microprocessors and microcontrollers Presents numerical integration techniques, transfer-function modeling, harmonic analysis and power quality performance assessment Examines existing software such as, MATLAB/Simulink, Power Systems Toolbox and PSIM to simulate power electronic circuits including the use of renewable energy sources such as wind and solar sources The simulation files are available for readers who register with the Google Group: power-electronics-interfacing-energy-conversion-systems@googlegroups.com. After your registration you will receive information in how to access the simulation files, the Google Group can also be used to communicate with other registered readers of this book.

Download or read book Applied Power Quality written by Sarath Perera and published by Elsevier. This book was released on 2022-11-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Power Quality: Analysis, Modelling, Design and Implementation of Power Quality Monitoring Systems is a systematic account of the modern field of power quality as it transforms to reflect changes in generation, loads, management techniques and improvements in monitoring devices and systems. It examines the management of power quality (including those which are emerging) including system planning levels, the emission allocation process and equipment immunity. The work reviews power quality disturbances and their impacts on equipment. It comprehensively assesses current power quality emission and allocation standards, including their application and deficiencies for power quality disturbances across steady state voltage; voltage unbalance; harmonics; voltage fluctuations, flicker and rapid voltage change; and voltage sags. The work reviews how readers may design and implement power quality monitoring schemes including: monitoring instruments; monitoring methodologies; data storage; data analysis and indices; reporting methods including benchmarking; and monitoring standards. It concludes with surveys of the electrical performance of modern equipment including renewable energy devices as it pertains to power quality. In all cases, the book draws on reliable sources of power quality data, measurements and studies (both laboratory and field) that have been undertaken by the Australian Power Quality and Reliability Centre over the past 20 years. - Demonstrates, with real-world case studies, how to design for robustness and to immunize common electrical equipment against power quality problems - Investigates how readers might usefully apply power quality standards to mitigate multiple phenomena, including high frequency harmonics in renewable generators - Addresses the impact of recent and forthcoming renewable energy conversion systems on power quality indices - Discusses the limitations and deficiencies of prevailing power quality standards

Download or read book Soft Computing in Condition Monitoring and Diagnostics of Electrical and Mechanical Systems written by Hasmat Malik and published by Springer Nature. This book was released on 2020-01-17 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a range of complex issues associated with condition monitoring (CM), fault diagnosis and detection (FDD) in smart buildings, wide area monitoring (WAM), wind energy conversion systems (WECSs), photovoltaic (PV) systems, structures, electrical systems, mechanical systems, smart grids, etc. The book’s goal is to develop and combine all advanced nonintrusive CMFD approaches on a common platform. To do so, it explores the main components of various systems used for CMFD purposes. The content is divided into three main parts, the first of which provides a brief introduction, before focusing on the state of the art and major research gaps in the area of CMFD. The second part covers the step-by-step implementation of novel soft computing applications in CMFD for electrical and mechanical systems. In the third and final part, the simulation codes for each chapter are included in an extensive appendix to support newcomers to the field.

Download or read book Computer and Computing Technologies in Agriculture II Volume 3 written by Daoliang Li and published by Springer. This book was released on 2010-02-03 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume comprise the refereed proceedings of the Second IFIP International Conference on Computer and Computing Technologies in Agriculture (CCTA2008), in Beijing, China, 2008. The conference on the Second IFIP International Conference on Computer and Computing Technologies in Agriculture (CCTA 2008) is cooperatively sponsored and organized by the China Agricultural University (CAU), the National Engineering Research Center for Information Technology in Agriculture (NERCITA), the Chinese Society of Agricultural Engineering (CSAE) , International Federation for Information Processing (IFIP), Beijing Society for Information Technology in Agriculture, China and Beijing Research Center for Agro-products Test and Farmland Inspection, China. The related departments of China’s central government bodies like: Ministry of Science and Technology, Ministry of Industry and Information Technology, Ministry of Education and the Beijing Municipal Natural Science Foundation, Beijing Academy of Agricultural and Forestry Sciences, etc. have greatly contributed and supported to this event. The conference is as good platform to bring together scientists and researchers, agronomists and information engineers, extension servers and entrepreneurs from a range of disciplines concerned with impact of Information technology for sustainable agriculture and rural development. The representatives of all the supporting organizations, a group of invited speakers, experts and researchers from more than 15 countries, such as: the Netherlands, Spain, Portugal, Mexico, Germany, Greece, Australia, Estonia, Japan, Korea, India, Iran, Nigeria, Brazil, China, etc.

Download or read book Smart Grid written by K S MANOJ and published by Notion Press. This book was released on 2020-01-03 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: All basic knowledge is provided for the Energy Engineers and the Electrical, Electronics, Computer and Instrumentation Engineering students, who work or wish to work, in Smart Grid and Microgrid area. It benefits them in obtaining essential and required understanding of the Smart Grid, from perceptions to actualisation. The book: • Presents the Smart Grid from abstraction to materialization. • Covers power grid networks, including how they are developed and deployed for power delivery and other Smart Grid services. • Discusses power systems, advanced communications, and required machine learning that define the Smart Grid. • Clearly differentiates the Smart Grid from the traditional power grid as it has been for the last century. • Provides the reader with a fundamental understanding of both physical-cyber -security and computer networking. • Presents the complexity and operational requirements of the evolving Smart Grid to the ICT professional and presents the same for ICT to the energy engineers. • Provides a detailed description of the cyber vulnerabilities and mitigation techniques of the Smart Grid. • Provides essential information for technocrats to make progress in the field and to allow power system engineers to optimize communication systems for the Smart Grid. • Is a suitable material for the undergraduate and post graduate students of electrical engineering to learn the fundamentals of Smart Grid.

Download or read book Advances in Materials and Systems Technologies II written by Akii Okonigbon Akaehomen Ibhadode and published by Trans Tech Publications Ltd. This book was released on 2009-02-20 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the International Conference on Engineering Research and Development: Innovations (ICERD 2008) held at the University of Benin, Nigeria during April 15 – 17, 2008

Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 2002 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: