Download or read book Power Plant Performance Monitoring Tech Books International written by Gay and published by . This book was released on 2006 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Plant Performance Monitoring written by Rodney R. Gay and published by . This book was released on 2004-10-01 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Plant Life Management and Performance Improvement written by John E Oakey and published by Elsevier. This book was released on 2011-09-28 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal- and gas-based power plants currently supply the largest proportion of the world’s power generation capacity, and are required to operate to increasingly stringent environmental standards. Higher temperature combustion is therefore being adopted to improve plant efficiency and to maintain net power output given the energy penalty that integration of advanced emissions control systems cause. However, such operating regimes also serve to intensify degradation mechanisms within power plant systems, potentially affecting their reliability and lifespan.Power plant life management and performance improvement critically reviews the fundamental degradation mechanisms that affect conventional power plant systems and components, as well as examining the operation and maintenance approaches and advanced plant rejuvenation and retrofit options that the industry are applying to ensure overall plant performance improvement and life management.Part one initially reviews plant operation issues, including fuel flexibility, condition monitoring and performance assessment. Parts two, three and four focus on coal boiler plant, gas turbine plant, and steam boiler and turbine plant respectively, reviewing environmental degradation mechanisms affecting plant components and their mitigation via advances in materials selection and life management approaches, such as repair, refurbishment and upgrade. Finally, part five reviews issues relevant to the performance management and improvement of advanced heat exchangers and power plant welds.With its distinguished editor and international team of contributors, Power plant life management and performance improvement is an essential reference for power plant operators, industrial engineers and metallurgists, and researchers interested in this important field. Provides an overview of the improvements to plant efficiency in coal- and gas-based power plants Critically reviews the fundamental degradation mechanisms that affect conventional power plant systems and components, noting mitigation routes alongside monitoring and assessment methods Addresses plant operation issues including fuel flexibility, condition monitoring and performance assessment
Download or read book Condition Monitoring in Large Thermal Power Plants written by Shrikant Bhave and published by Notion Press. This book was released on 2017-09-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technological developments in electrical power generation over the last decade have enabled creation of large pulverized coal fired and combined cycle power plants. These are required to run continuously without faults to assure highest reliability and availability of electrical power around the clock. Condition Monitoring in Large Thermal Power Plants deals with monitoring the operational integrity of boiler and turbine generator plants that includes pumps, fans etc - A most important step in achieving highest reliability and availability.
Download or read book Thermal Power Plants Handbook written by Matt Danson and published by . This book was released on 2015-02-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal power plants are significant process industries for engineering specialists. The power sector has been facing several crucial issues over the past few years. The primary challenge is to meet the increasing power demand in a sustainable and efficient manner. Practicing power plant engineers not only look after the maintenance and operations of the plant, but also look after a variety of activities like research and development, starting from power generation to the environmental evaluation of the power plants. This book discusses features, operational matters, advantages and limitations of power plants, as well as the benefits of renewable power generation. It also elucidates thermal performance evaluation, fuel combustion matters, performance monitoring and modeling, component fault diagnosis and prognosis, functional analysis, economics of plant operation and maintenance, and environmental facets. This book discusses numerous issues related to both coal fired and gas turbine power plants. It will be beneficial for undergraduate and research oriented students, and for engineers working in power plants.
Download or read book Current Fossil Fuel Power Plant Performance Monitoring Recommended R D programs written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Safety written by and published by . This book was released on 1973 with total page 1594 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Power Plant Materials Design and Technology written by Dermot Roddy and published by Elsevier. This book was released on 2010-05-24 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil-fuel power plants account for the majority of worldwide power generation. Increasing global energy demands, coupled with issues of ageing and inefficient power plants, have led to new power plant construction programmes. As cheaper fossil fuel resources are exhausted and emissions criteria are tightened, utilities are turning to power plants designed with performance in mind to satisfy requirements for improved capacity, efficiency, and environmental characteristics. Advanced power plant materials, design and technology provides a comprehensive reference on the state of the art of gas-fired and coal-fired power plants, their major components and performance improvement options. Part one critically reviews advanced power plant designs which target both higher efficiency and flexible operation, including reviews of combined cycle technology and materials performance issues. Part two reviews major plant components for improved operation, including advanced membrane technology for both hydrogen (H2) and carbon dioxide (CO2) separation, as well as flue gas handling technologies for improved emissions control of sulphur oxides (SOx), nitrogen oxides (NOx), mercury, ash and particulates. The section concludes with coverage of high-temperature sensors, and monitoring and control technology that are essential to power plant operation and performance optimisation. Part three begins with coverage of low-rank coal upgrading and biomass resource utilisation for improved power plant fuel flexibility. Routes to improve the environmental impact are also reviewed, with chapters detailing the integration of underground coal gasification and the application of carbon dioxide (CO2) capture and storage. Finally, improved generation performance is reviewed with coverage of syngas and hydrogen (H2) production from fossil-fuel feedstocks. With its distinguished international team of contributors, Advanced power plant materials, design and technology is a standard reference for all power plant engineers and operators, as well as to academics and researchers in this field. Provides a comprehensive reference on the state-of-the-art gas-fired and coal-fired power plants, their major components and performance improvement options Examines major plant components for improved operation as well as flue gas handling technologies for improved emissions control Routes to improve environmental impact are discussed with chapters detailing the integration of underground coal gasification
Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.
Download or read book Thermal Power Plant Performance Analysis written by Gilberto Francisco Martha de Souza and published by Springer Science & Business Media. This book was released on 2012-01-04 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents reliability-based tools used to define performance of complex systems and introduces the basic concepts of reliability, maintainability and risk analysis aiming at their application as tools for power plant performance improvement.
Download or read book Thermal Power Plant written by Dipak Sarkar and published by Elsevier. This book was released on 2015-08-20 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Power Plant: Design and Operation deals with various aspects of a thermal power plant, providing a new dimension to the subject, with focus on operating practices and troubleshooting, as well as technology and design. Its author has a 40-long association with thermal power plants in design as well as field engineering, sharing his experience with professional engineers under various training capacities, such as training programs for graduate engineers and operating personnel. Thermal Power Plant presents practical content on coal-, gas-, oil-, peat- and biomass-fueled thermal power plants, with chapters in steam power plant systems, start up and shut down, and interlock and protection. Its practical approach is ideal for engineering professionals. Focuses exclusively on thermal power, addressing some new frontiers specific to thermal plants Presents both technology and design aspects of thermal power plants, with special treatment on plant operating practices and troubleshooting Features a practical approach ideal for professionals, but can also be used to complement undergraduate and graduate studies
Download or read book On line Monitoring for Improving Performance of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2008 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report extends the application of on-line monitoring to equipment and process condition monitoring, encompassing an array of technologies including vibration monitoring, acoustic monitoring, loose parts monitoring, motor current signature analysis and noise diagnostics, as well as vibration analysis of the reactor core and the primary circuit. Furthermore, this report includes the application of modeling technologies for equipment and process condition monitoring. A majority of these technologies depend on existing data from existing sensors and first principles models to estimate equipment and process behavior using empirical and physical modeling techniques. In doing so, pattern recognition tools such as neural networks, fuzzy classification of data, multivariate state estimation and other means are used. These means are described in the report, and examples of their application and implementation are provided. The benefits of OLM for performance verification of process instruments were described in the first report and included such advantages as the ability to extend the calibration interval of pressure, level and flow transmitters, detection of blockages, voids and leaks in pressure sensing lines, detection of degradation of the dynamic response of process instruments, and the like. Examples of benefits of OLM for condition monitoring include: (1) the ability to determine the onset of failure of pumps, valves, motors and reactor vessel components; (2) residual life assessment of equipment; (3) equipment life extension and aging management; (4) the ability to establish objective schedules for preventive maintenance, equipment refurbishment or replacement; and (5) maintenance cost reduction, efficiency improvements, reduction of plant outages, and reduction of radiation exposure to plant personnel.--Publisher's description.
Download or read book Performance Monitoring Guidelines for Power Plants written by American Society of Mechanical Engineers and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "These guidelines cover fossil-fueled power plants, gas-turbine power plants operating in combined cycle, and a balance-of-plant portion including interface with the steam supply system of nuclear power plants. They include performance monitoring concepts, a description of various methods available, and means for evaluating particular applications. Since the original publication of these guidelines in 1993--then limited to steam power plants--the field of performance monitoring (PM) has gained considerable importance. The lifetime of plant equipment has been improved, while economic demands have increased to extend it even further by careful monitoring. The PM techniques themselves have also been transformed, largely by the emergence of electronic data acquisition as the dominant method of obtaining the necessary information."--ASME International website, viewed 18 October 2010.
Download or read book Current Abstracts written by and published by . This book was released on 1994-07 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Power Plants Innovative Technologies for Instrumentation and Control Systems written by Yang Xu and published by Springer. This book was released on 2019-03-28 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 3rd International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plants, held in Harbin, China on 15th–17th August 2018. The symposium discussed the status quo, technical advances and development direction of digital instrument control technology, software reliability, information security and physical protection in the process of nuclear power development. Offering technical insights and know from leading experts, this book is a valuable resource for both practitioners and academics working in the field of nuclear instrumentation, control systems and other safety-critical systems, as well as nuclear power plant managers, public officials, and regulatory authorities.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
