Download or read book Challenges in Automation Robotics and Measurement Techniques written by Roman Szewczyk and published by Springer. This book was released on 2016-02-15 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the set of papers accepted for presentation at the International Conference Automation, held in Warsaw, 2-4 March of 2016. It presents the research results presented by top experts in the fields of industrial automation, control, robotics and measurement techniques. Each chapter presents a thorough analysis of a specific technical problem which is usually followed by numerical analysis, simulation, and description of results of implementation of the solution of a real world problem. The presented theoretical results, practical solutions and guidelines will be valuable for both researchers working in the area of engineering sciences and for practitioners solving industrial problems.

Download or read book Power Electronics Design written by Keith H. Sueker and published by Elsevier. This book was released on 2005-08-09 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wealth of practical design information ... the next-best-thing to having a mentor with a quarter-century of experience!

Download or read book Advances in Power Electronics and Instrumentation Engineering written by Vinu V Das and published by Springer Science & Business Media. This book was released on 2011-04-13 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second International Conference on Advances in Power Electronics and Instrumentation Engineering, PEIE 2011, held at Nagpur, India, in April 2011. The 9 revised full papers presented together with 4 short papers and 7 poster papers were carefully reviewed and selected from numerous submissions. The papers address current issues in the field of power electronics, communication engineering, instrumentation engineering, digital electronics, electrical power engineering, electrical machines, information technology, control systems, and the like.

Download or read book Green Technology for Smart City and Society written by Renu Sharma and published by Springer Nature. This book was released on 2020-11-30 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected papers from the International Conference on Green Technology for Smart City and Society (GTSCS 2020), organized by the Institute of Technical Education and Research, Siksha ‘O’ Anusandhan University, Bhubaneswar, India, during 13–14 August 2020. The book covers topics such as machine learning, artificial intelligence, deep learning, optimization algorithm, IoT, signal processing, etc. The book is helpful for researchers working in the discipline of Electrical, Electronics and Computer Science. The researchers working in the allied domain of communication and control will also find the book useful as it deals with the latest methodologies and applications.

Download or read book 40TH GISFI STANDARDIZATION SERIES MEETING JOINTLY WITH INTERNATIONAL CONFERENCE ON 6G AND WIRELESS NETWORK TECHNOLOGIES written by Kolhapur Institute of Technology’s College of Engineering (Autonomous) and published by Book Rivers. This book was released on 2023-07-07 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Trends in Computer Science Engineering and Information Technology written by Dhinaharan Nagamalai and published by Springer Science & Business Media. This book was released on 2011-09-14 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Conference on Computer Science, Engineering and Information Technology, CCSEIT 2011, held in Tirunelveli, India, in September 2011. The 73 revised full papers were carefully reviewed and selected from more than 400 initial submissions. The papers feature significant contributions to all major fields of the Computer Science and Information Technology in theoretical and practical aspects.

Download or read book Electronic Circuit Design written by Nihal Kularatna and published by CRC Press. This book was released on 2017-12-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: With growing consumer demand for portability and miniaturization in electronics, design engineers must concentrate on many additional aspects in their core design. The plethora of components that must be considered requires that engineers have a concise understanding of each aspect of the design process in order to prevent bug-laden prototypes. Electronic Circuit Design allows engineers to understand the total design process and develop prototypes which require little to no debugging before release. It providesstep-by-step instruction featuring modern components, such as analog and mixed signal blocks, in each chapter. The book details every aspect of the design process from conceptualization and specification to final implementation and release. The text also demonstrates how to utilize device data sheet information and associated application notes to design an electronic system. The hybrid nature of electronic system design poses a great challenge to engineers. This book equips electronics designers with the practical knowledge and tools needed to develop problem free prototypes that are ready for release.

Download or read book Intelligent and Cloud Computing written by Debahuti Mishra and published by Springer Nature. This book was released on 2020-10-30 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features a collection of high-quality research papers presented at the International Conference on Intelligent and Cloud Computing (ICICC 2019), held at Siksha 'O' Anusandhan (Deemed to be University), Bhubaneswar, India, on December 20, 2019. Including contributions on system and network design that can support existing and future applications and services, it covers topics such as cloud computing system and network design, optimization for cloud computing, networking, and applications, green cloud system design, cloud storage design and networking, storage security, cloud system models, big data storage, intra-cloud computing, mobile cloud system design, real-time resource reporting and monitoring for cloud management, machine learning, data mining for cloud computing, data-driven methodology and architecture, and networking for machine learning systems.

Download or read book Recent Advancements in System Modelling Applications written by R Malathi and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of peer-reviewed scientific papers submitted by active researchers in the 36th National System Conference (NSC 2012). NSC is an annual event of the Systems Society of India (SSI), primarily oriented to strengthen the systems movement and its applications for the welfare of humanity. A galaxy of academicians, professionals, scientists, statesman and researchers from different parts of the country and abroad are invited to attend the Conference. The book presents various research articles in the area of system modelling in all disciplines of engineering sciences as well as socio-economic systems. The book can be used as a tool for further research.

Download or read book Embedded Computing and Mechatronics with the PIC32 Microcontroller written by Kevin Lynch and published by Newnes. This book was released on 2015-12-08 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time in a single reference, this book provides the beginner with a coherent and logical introduction to the hardware and software of the PIC32, bringing together key material from the PIC32 Reference Manual, Data Sheets, XC32 C Compiler User's Guide, Assembler and Linker Guide, MIPS32 CPU manuals, and Harmony documentation. This book also trains you to use the Microchip documentation, allowing better life-long learning of the PIC32. The philosophy is to get you started quickly, but to emphasize fundamentals and to eliminate "magic steps" that prevent a deep understanding of how the software you write connects to the hardware. Applications focus on mechatronics: microcontroller-controlled electromechanical systems incorporating sensors and actuators. To support a learn-by-doing approach, you can follow the examples throughout the book using the sample code and your PIC32 development board. The exercises at the end of each chapter help you put your new skills to practice. Coverage includes: A practical introduction to the C programming language Getting up and running quickly with the PIC32 An exploration of the hardware architecture of the PIC32 and differences among PIC32 families Fundamentals of embedded computing with the PIC32, including the build process, time- and memory-efficient programming, and interrupts A peripheral reference, with extensive sample code covering digital input and output, counter/timers, PWM, analog input, input capture, watchdog timer, and communication by the parallel master port, SPI, I2C, CAN, USB, and UART An introduction to the Microchip Harmony programming framework Essential topics in mechatronics, including interfacing sensors to the PIC32, digital signal processing, theory of operation and control of brushed DC motors, motor sizing and gearing, and other actuators such as stepper motors, RC servos, and brushless DC motors For more information on the book, and to download free sample code, please visit http://www.nu32.org Extensive, freely downloadable sample code for the NU32 development board incorporating the PIC32MX795F512H microcontroller Free online instructional videos to support many of the chapters

Download or read book Microcontroller Projects in C for the 8051 written by Dogan Ibrahim and published by Newnes. This book was released on 2000-06-05 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a thoroughly practical way to explore the 8051 and discover C programming through project work. Through graded projects, Dogan Ibrahim introduces the reader to the fundamentals of microelectronics, the 8051 family, programming in C, and the use of a C compiler. The specific device used for examples is the AT89C2051 - a small, economical chip with re-writable memory, readily available from the major component suppliers. A working knowledge of microcontrollers, and how to program them, is essential for all students of electronics. In this rapidly expanding field many students and professionals at all levels need to get up to speed with practical microcontroller applications. Their rapid fall in price has made microcontrollers the most exciting and accessible new development in electronics for years - rendering them equally popular with engineers, electronics hobbyists and teachers looking for a fresh range of projects. Microcontroller Projects in C for the 8051 is an ideal resource for self-study as well as providing an interesting, enjoyable and easily mastered alternative to more theoretical textbooks. Practical projects that enable students and practitioners to get up and running straight away with 8051 microcontrollers A hands-on introduction to practical C programming A wealth of project ideas for students and enthusiasts

Download or read book CIEP written by and published by . This book was released on 2000 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 1st International Conference on Advances in Science Engineering and Robotics Technology 2019 ICASERT 2019 written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Quintessential PIC Microcontroller written by Sid Katzen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written specifically for readers with no prior knowledge of computing, electronics, or logic design. Uses real-world hardware and software products to illustrate the material, and includes numerous fully worked examples and self-assessment questions.

Download or read book Applications of Nonlinear Dynamics written by Visarath In and published by Springer Science & Business Media. This book was released on 2009-02-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ?eld of applied nonlinear dynamics has attracted scientists and engineers across many different disciplines to develop innovative ideas and methods to study c- plex behavior exhibited by relatively simple systems. Examples include: population dynamics, ?uidization processes, applied optics, stochastic resonance, ?ocking and ?ightformations,lasers,andmechanicalandelectricaloscillators. Acommontheme among these and many other examples is the underlying universal laws of nonl- ear science that govern the behavior, in space and time, of a given system. These laws are universal in the sense that they transcend the model-speci?c features of a system and so they can be readily applied to explain and predict the behavior of a wide ranging phenomena, natural and arti?cial ones. Thus the emphasis in the past decades has been in explaining nonlinear phenomena with signi?cantly less att- tion paid to exploiting the rich behavior of nonlinear systems to design and fabricate new devices that can operate more ef?ciently. Recently, there has been a series of meetings on topics such as Experimental Chaos, Neural Coding, and Stochastic Resonance, which have brought together many researchers in the ?eld of nonlinear dynamics to discuss, mainly, theoretical ideas that may have the potential for further implementation. In contrast, the goal of the 2007 ICAND (International Conference on Applied Nonlinear Dynamics) was focused more sharply on the implementation of theoretical ideas into actual - vices and systems.

Download or read book Programming PIC Microcontrollers with XC8 written by Armstrong Subero and published by Apress. This book was released on 2017-12-06 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to use microcontrollers without all the frills and math. This book uses a practical approach to show you how to develop embedded systems with 8 bit PIC microcontrollers using the XC8 compiler. It's your complete guide to understanding modern PIC microcontrollers. Are you tired of copying and pasting code into your embedded projects? Do you want to write your own code from scratch for microcontrollers and understand what your code is doing? Do you want to move beyond the Arduino? Then Programming PIC Microcontrollers with XC8 is for you! Written for those who want more than an Arduino, but less than the more complex microcontrollers on the market, PIC microcontrollers are the next logical step in your journey. You'll also see the advantage that MPLAB X offers by running on Windows, MAC and Linux environments. You don't need to be a command line expert to work with PIC microcontrollers, so you can focus less on setting up your environment and more on your application. What You’ll Learn Set up the MPLAB X and XC8 compilers for microcontroller development Use GPIO and PPS Review EUSART and Software UART communications Use the eXtreme Low Power (XLP) options of PIC microcontrollers Explore wireless communications with WiFi and Bluetooth Who This Book Is For Those with some basic electronic device and some electronic equipment and knowledge. This book assumes knowledge of the C programming language and basic knowledge of digital electronics though a basic overview is given for both. A complete newcomer can follow along, but this book is heavy on code, schematics and images and focuses less on the theoretical aspects of using microcontrollers. This book is also targeted to students wanting a practical overview of microcontrollers outside of the classroom.

Download or read book PIC Microcontrollers written by Martin P. Bates and published by Elsevier. This book was released on 2004-06-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of microcontroller based solutions to everyday design problems in electronics, is the most important development in the field since the introduction of the microprocessor itself. The PIC family is established as the number one microcontroller at an introductory level.Assuming no prior knowledge of microprocessors, Martin Bates provides a comprehensive introduction to microprocessor systems and applications covering all the basic principles of microelectronics.Using the latest Windows development software MPLAB, the author goes on to introduce microelectronic systems through the most popular PIC devices currently used for project work, both in schools and colleges, as well as undergraduate university courses. Students of introductory level microelectronics, including microprocessor / microcontroller systems courses, introductory embedded systems design and control electronics, will find this highly illustrated text covers all their requirements for working with the PIC.Part A covers the essential principles, concentrating on a systems approach. The PIC itself is covered in Part B, step by step, leading to demonstration programmes using labels, subroutines, timer and interrupts. Part C then shows how applications may be developed using the latest Windows software, and some hardware prototyping methods.The new edition is suitable for a range of students and PIC enthusiasts, from beginner to first and second year undergraduate level. In the UK, the book is of specific relevance to AVCE, as well as BTEC National and Higher National programmes in electronic engineering.· A comprehensive introductory text in microelectronic systems, written round the leading chip for project work· Uses the latest Windows development software, MPLAB, and the most popular types of PIC, for accessible and low-cost practical work· Focuses on the 16F84 as the starting point for introducing the basic architecture of the PIC, but also covers newer chips in the 16F8X range, and 8-pin mini-PICs