Download or read book Power aware Circuit Design and Optimization for Total Chip Power Reduction written by Milena Vratonjić and published by . This book was released on 2010 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Aware Testing and Test Strategies for Low Power Devices written by Patrick Girard and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managing the power consumption of circuits and systems is now considered one of the most important challenges for the semiconductor industry. Elaborate power management strategies, such as dynamic voltage scaling, clock gating or power gating techniques, are used today to control the power dissipation during functional operation. The usage of these strategies has various implications on manufacturing test, and power-aware test is therefore increasingly becoming a major consideration during design-for-test and test preparation for low power devices. This book explores existing solutions for power-aware test and design-for-test of conventional circuits and systems, and surveys test strategies and EDA solutions for testing low power devices.
Download or read book Power Aware Computer Systems written by Babak Falsafi and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contributes the thoroughly refereed post-proceedings of the 4th International Workshop on Power-Aware Computer Systems, PACS 2004, held in Portland, OR, USA in December 2004. The 12 revised full papers presented were carefully reviewed, selected, and revised for inclusion in the book. The papers span a wide spectrum of topics in power-aware systems; they are organized in topical sections on microarchitecture- and circuit-level techniques, power-aware memory and interconnect systems, and frequency- and voltage-scaling techniques.
Download or read book Power Aware Design Methodologies written by Massoud Pedram and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Aware Design Methodologies was conceived as an effort to bring all aspects of power-aware design methodologies together in a single document. It covers several layers of the design hierarchy from technology, circuit logic, and architectural levels up to the system layer. It includes discussion of techniques and methodologies for improving the power efficiency of CMOS circuits (digital and analog), systems on chip, microelectronic systems, wirelessly networked systems of computational nodes and so on. In addition to providing an in-depth analysis of the sources of power dissipation in VLSI circuits and systems and the technology and design trends, this book provides a myriad of state-of-the-art approaches to power optimization and control. The different chapters of Power Aware Design Methodologies have been written by leading researchers and experts in their respective areas. Contributions are from both academia and industry. The contributors have reported the various technologies, methodologies, and techniques in such a way that they are understandable and useful.
Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Vassilis Paliouras and published by Springer Science & Business Media. This book was released on 2005-09-06 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th International Workshop on Power and Timing Optimization and Simulation, PATMOS 2005, held in Leuven, Belgium in September 2005. The 74 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on low-power processors, code optimization for low-power, high-level design, telecommunications and signal processing, low-power circuits, system-on-chip design, busses and interconnections, modeling, design automation, low-power techniques, memory and register files, applications, digital circuits, and analog and physical design.
Download or read book Low Power Design with High Level Power Estimation and Power Aware Synthesis written by Sumit Ahuja and published by Springer Science & Business Media. This book was released on 2011-10-22 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel research techniques, algorithms, methodologies and experimental results for high level power estimation and power aware high-level synthesis. Readers will learn to apply such techniques to enable design flows resulting in shorter time to market and successful low power ASIC/FPGA design.
Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Rene van Leuken and published by Springer. This book was released on 2011-01-16 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 20th International Conference on Integrated Circuit and System Design, PATMOS 2010, held in Grenoble, France, in September 2010. The 24 revised full papers presented and the 9 extended abstracts were carefully reviewed and are organized in topical sections on design flows; circuit techniques; low power circuits; self-timed circuits; process variation; high-level modeling of poweraware heterogeneous designs in SystemC-AMS; and minalogic.
Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by José Monteiro and published by Springer Science & Business Media. This book was released on 2010-02-18 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of 19th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2009, featuring Integrated Circuit and System Design, held in Delft, The Netherlands during September 9-11, 2009. The 26 revised full papers and 10 revised poster papers presented were carefully reviewed and selected from numerous submissions. The papers are organized in topical sections on variability & statistical timing, circuit level techniques, power management, low power circuits & technology, system level techniques, power & timing optimization techniques, self-timed circuits, low power circuit analysis & optimization, and low power design studies.
Download or read book Power Management in Mobile Devices written by Findlay Shearer and published by Elsevier. This book was released on 2011-04-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sealed Lead Acid...Nickel Cadmium...Lithium Ion...How do you balance battery life with performance and cost?This book shows you how!Now that "mobile" has become the standard, the consumer not only expects mobility but demands power longevity in wireless devices. As more and more features, computing power, and memory are packed into mobile devices such as iPods, cell phones, and cameras, there is a large and growing gap between what devices can do and the amount of energy engineers can deliver. In fact, the main limiting factor in many portable designs is not hardware or software, but instead how much power can be delivered to the device. This book describes various design approaches to reduce the amount of power a circuit consumes and techniques to effectively manage the available power.Power Management Advice On:•Low Power Packaging Techniques•Power and Clock Gating•Energy Efficient Compilers•Various Display Technologies•Linear vs. Switched Regulators•Software Techniques and Intelligent Algorithms* Addresses power versus performance that each newly developed mobile device faces* Robust case studies drawn from the author's 30 plus years of extensive real world experience are included* Both hardware and software are discussed concerning their roles in power
Download or read book MULTICORE SYSTEMS ON CHIP written by Ben Abadallah Abderazek and published by Springer Science & Business Media. This book was released on 2010-08-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional on-chip communication design mostly use ad-hoc approaches that fail to meet the challenges posed by the next-generation MultiCore Systems on-chip (MCSoC) designs. These major challenges include wiring delay, predictability, diverse interconnection architectures, and power dissipation. A Network-on-Chip (NoC) paradigm is emerging as the solution for the problems of interconnecting dozens of cores into a single system on-chip. However, there are many problems associated with the design of such systems. These problems arise from non-scalable global wire delays, failure to achieve global synchronization, and difficulties associated with non-scalable bus-based functional interconnects. The book consists of three parts, with each part being subdivided into four chapters. The first part deals with design and methodology issues. The architectures used in conventional methods of MCSoCs design and custom multiprocessor architectures are not flexible enough to meet the requirements of different application domains and not scalable enough to meet different computation needs and different complexities of various applications. Several chapters of the first part will emphasize on the design techniques and methodologies. The second part covers the most critical part of MCSoCs design — the interconnections. One approach to addressing the design methodologies is to adopt the so-called reusability feature to boost design productivity. In the past years, the primitive design units evolved from transistors to gates, finite state machines, and processor cores. The network-on-chip paradigm offers this attractive property for the future and will be able to close the productivity gap. The last part of this book delves into MCSoCs validations and optimizations. A more qualitative approach of system validation is based on the use of formal techniques for hardware design. The main advantage of formal methods is the possibility to prove the validity of essential design requirements. As formal languages have a mathematical foundation, it is possible to formally extract and verify these desired properties of the complete abstract state space. Online testing techniques for identifying faults that can lead to system failure are also surveyed. Emphasis is given to analytical redundancy-based techniques that have been developed for fault detection and isolation in the automatic control area.
Download or read book Multicore Systems On Chip Practical Software Hardware Design written by Abderazek Ben Abdallah and published by Springer Science & Business Media. This book was released on 2013-07-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: System on chips designs have evolved from fairly simple unicore, single memory designs to complex heterogeneous multicore SoC architectures consisting of a large number of IP blocks on the same silicon. To meet high computational demands posed by latest consumer electronic devices, most current systems are based on such paradigm, which represents a real revolution in many aspects in computing. The attraction of multicore processing for power reduction is compelling. By splitting a set of tasks among multiple processor cores, the operating frequency necessary for each core can be reduced, allowing to reduce the voltage on each core. Because dynamic power is proportional to the frequency and to the square of the voltage, we get a big gain, even though we may have more cores running. As more and more cores are integrated into these designs to share the ever increasing processing load, the main challenges lie in efficient memory hierarchy, scalable system interconnect, new programming paradigms, and efficient integration methodology for connecting such heterogeneous cores into a single system capable of leveraging their individual flexibility. Current design methods tend toward mixed HW/SW co-designs targeting multicore systems on-chip for specific applications. To decide on the lowest cost mix of cores, designers must iteratively map the device’s functionality to a particular HW/SW partition and target architectures. In addition, to connect the heterogeneous cores, the architecture requires high performance complex communication architectures and efficient communication protocols, such as hierarchical bus, point-to-point connection, or Network-on-Chip. Software development also becomes far more complex due to the difficulties in breaking a single processing task into multiple parts that can be processed separately and then reassembled later. This reflects the fact that certain processor jobs cannot be easily parallelized to run concurrently on multiple processing cores and that load balancing between processing cores – especially heterogeneous cores – is very difficult.
Download or read book Advanced Multicore Systems On Chip written by Abderazek Ben Abdallah and published by Springer. This book was released on 2017-09-10 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: From basic architecture, interconnection, and parallelization to power optimization, this book provides a comprehensive description of emerging multicore systems-on-chip (MCSoCs) hardware and software design. Highlighting both fundamentals and advanced software and hardware design, it can serve as a primary textbook for advanced courses in MCSoCs design and embedded systems. The first three chapters introduce MCSoCs architectures, present design challenges and conventional design methods, and describe in detail the main building blocks of MCSoCs. Chapters 4, 5, and 6 discuss fundamental and advanced on-chip interconnection network technologies for multi and many core SoCs, enabling readers to understand the microarchitectures for on-chip routers and network interfaces that are essential in the context of latency, area, and power constraints. With the rise of multicore and many-core systems, concurrency is becoming a major issue in the daily life of a programmer. Thus, compiler and software development tools are critical in helping programmers create high-performance software. Programmers should make sure that their parallelized program codes will not cause race condition, memory-access deadlocks, or other faults that may crash their entire systems. As such, Chapter 7 describes a novel parallelizing compiler design for high-performance computing. Chapter 8 provides a detailed investigation of power reduction techniques for MCSoCs at component and network levels. It discusses energy conservation in general hardware design, and also in embedded multicore system components, such as CPUs, disks, displays and memories. Lastly, Chapter 9 presents a real embedded MCSoCs system design targeted for health monitoring in the elderly.
Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Johan Vounckx and published by Springer Science & Business Media. This book was released on 2006-09-08 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 16th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS 2006. The book presents 41 revised full papers and 23 revised poster papers together with 4 key notes and 3 industrial abstracts. Topical sections include high-level design, power estimation and modeling memory and register files, low-power digital circuits, busses and interconnects, low-power techniques, applications and SoC design, modeling, and more.
Download or read book Proceedings of the 1st International Conference on Electronic Engineering and Renewable Energy written by Bekkay Hajji and published by Springer. This book was released on 2018-08-01 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings present a selection of refereed papers presented at the 1st International Conference on Electronic Engineering and Renewable Energy (ICEERE 2018) held during 15-17 April 2018, Saidi, Morocco. The contributions from electrical engineers and experts highlight key issues and developments essential to the multifaceted field of electrical engineering systems and seek to address multidisciplinary challenges in Information and Communication Technologies. The book has a special focus on energy challenges for developing the Euro-Mediterranean regions through new renewable energy technologies in the agricultural and rural areas. The book is intended for academia, including graduate students, experienced researchers and industrial practitioners working in the fields of Electronic Engineering and Renewable Energy.
Download or read book Essential Issues in SOC Design written by Youn-Long Steve Lin and published by Springer Science & Business Media. This book was released on 2007-05-31 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book originated from a workshop held at the DATE 2005 conference, namely Designing Complex SOCs. State-of-the-art in issues related to System-on-Chip (SoC) design by leading experts in the fields, it covers IP development, verification, integration, chip implementation, testing and software. It contains valuable academic and industrial examples for those involved with the design of complex SOCs.
Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Nadine Azemard and published by Springer. This book was released on 2007-08-21 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features the refereed proceedings of the 17th International Workshop on Power and Timing Modeling, Optimization and Simulation. Papers cover high level design, low power design techniques, low power analog circuits, statistical static timing analysis, power modeling and optimization, low power routing optimization, security and asynchronous design, low power applications, modeling and optimization, and more.
Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Jose L. Ayala and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Conference on Integrated Circuit and System Design, PATMOS 2011, held in Madrid, Spain, in September 2011. The 34 revised full papers presented were carefully reviewed and selected from numerous submissions. The paper feature emerging challenges in methodologies and tools for the design of upcoming generations of integrated circuits and systems and focus especially on timing, performance and power consumption as well as architectural aspects with particular emphasis on modeling, design, characterization, analysis and optimization.
