Download or read book Powders and Bulk Solids written by Dietmar Schulze and published by Springer Nature. This book was released on 2021-09-02 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book concentrates on powder flow properties, their measurement and applications. These topics are explained starting from the interactions between individual particles up to the design of silos. A wide range of problems are discussed – such as flow obstructions, segregation, and vibrations. The goal is to provide a deeper understanding of the powder flow, and to show practical solutions.
Download or read book Adsorption by Powders and Porous Solids written by Jean Rouquerol and published by Academic Press. This book was released on 2013-09-06 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The declared objective of this book is to provide an introductory review of the various theoretical and practical aspects of adsorption by powders and porous solids with particular reference to materials of technological importance. The primary aim is to meet the needs of students and non-specialists who are new to surface science or who wish to use the advanced techniques now available for the determination of surface area, pore size and surface characterization. In addition, a critical account is given of recent work on the adsorptive properties of activated carbons, oxides, clays and zeolites. Provides a comprehensive treatment of adsorption at both the gas/solid interface and the liquid/solid interface Includes chapters dealing with experimental methodology and the interpretation of adsorption data obtained with porous oxides, carbons and zeolites Techniques capture the importance of heterogeneous catalysis, chemical engineering and the production of pigments, cements, agrochemicals, and pharmaceuticals
Download or read book Powder and Bulk Solids Handling Processes written by Koichi Iinoya and published by CRC Press. This book was released on 1988-07-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some key points in the instrumentation of powder handling processes and provides readers with sufficient knowledge of instrumentation to act as a base for the development of new instruments. It is helpful for instrumentation engineers in powder and bulk solid processes.
Download or read book Powders and Solids written by W Hoyle and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical industry processes a high proportion of its products in powder form, thus making the efficient, effective and safe handling and processing of powders of prime importance. Powders and Solids: Developments in Handling and Processing Technologies brings the reader right up-to-date with both newly-introduced commercial practices and results of recent fundamental research on the behaviour of model powders. Case studies are also included. Commencing with an overview of developments in the health and safety aspects of handling powders, the book then goes on to look at the new technologies being applied to powders and powder handling, followed by aspects of measurement and control in powder handling. It will be essential reading for all industrial practitioners, particularly those in the pharmaceutical industry, as well as all engineers working either in industry or research on processes involving solid and powder handling.
Download or read book Principles of Powder Mechanics written by R. L. Brown and published by Elsevier. This book was released on 2016-01-11 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Series of Monographs in Chemical Engineering, Volume 10: Principles of Powder Mechanics: Essays on the Packing and Flow of Powders and Bulk Solids covers topics on packings; elementary statics; measurement of powder properties; flow patterns and segregation; and kinematics.
Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.
Download or read book Guidelines for Safe Handling of Powders and Bulk Solids written by Stanley S. Grossel and published by Wiley-AIChE. This book was released on 2005 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.
Download or read book Powders and Solids written by William Hoyle and published by Royal Society of Chemistry. This book was released on 2001 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical industry processes a high proportion of its products in powder form, thus making the efficient, effective and safe handling and processing of powders of prime importance. Powders and Solids: Developments in Handling and Processing Technologies brings the reader right up-to-date with both newly-introduced commercial practices and results of recent fundamental research on the behaviour of model powders. Case studies are also included. Commencing with an overview of developments in the health and safety aspects of handling powders, the book then goes on to look at the new technologies being applied to powders and powder handling, followed by aspects of measurement and control in powder handling. It will be essential reading for all industrial practitioners, particularly those in the pharmaceutical industry, as well as all engineers working either in industry or research on processes involving solid and powder handling.
Download or read book Guidelines for Safe Handling of Powders and Bulk Solids written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powders and bulk solids, handled widely in the chemical, pharmaceutical, agriculture, smelting, and other industries present unique fire, explosion, and toxicity hazards. Indeed, substances which are practically inert in consolidated form may become quite hazardous when converted to powders and granules. The U.S. Chemical Safety and Hazard Investigation Board is currently investigating dust explosions that occured in 2003 at WestPharma, CTA Acoustics, and Hayes-Lemmerz, and is likely to recommend that companies that handle powders or whose operations produce dust pay more attention to understanding the hazards that may exist at their facility. This new CCPS guidelines book will discuss the types of hazards that can occur in a wide range of process equipment and with a wide range of substances, and will present measures to address these hazards.
Download or read book Powder Bulk Solids Conference Exhibition written by and published by . This book was released on 1994 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Dynamics of Fine Powders written by K. Rietema and published by Springer Science & Business Media. This book was released on 1991-08-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: flour, potato starch, cracking catalyst, sand, and gravel, one will probably agree that the first four materials definitely are powders and the last one certainly is not. Whether one would call sand a powder probably depends on the partiele size and on personal Vlews. When the astronaut Neil Armstrong returned to the Earth from his trip on the surface of the Moon, he stated: 'The surface is fine and powdery. I can kick it up loosely with my toe. It does adhere in fine layers like powdered charcoal to the sole and inside of my boots. I only go in a small fraction of an inch, but I can see the footprints of my boots and the treads in the fine sandy partieles. ' These words elearly show that the behaviour of powders de pends on the circumstances. In wh at respects are those on the Moon different from those on the Earth? (1) The gravitational force on the surface of the Moon is only one-sixth of that on the Earth. (2) There is no gas on the Moon. The latter aspect means that any water brought there would evaporate and disappear immediately, hence powders on the Moon will always be perfect1y dry so that cohesion between the separate partieles due to liquid bridges will be zero.
Download or read book Handbook of Powder Science Technology written by Muhammed Fayed and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of Canada, and Australia have increased teach Handbook of Powder Science and Technology, ing, research, and training activities in areas the field of powder science and technology has related to particle science and technology. gained broader recognition and its various ar In addition, it is worth mentioning the many eas of interest have become more defined and books and monographs that have been pub focused. Research and application activities lished on specific areas of particle, powder, related to particle technology have increased and particle fluid by professional publishers, globally in academia, industry, and research technical societies and university presses. Also, institutions. During the last decade, many to date, there are many career development groups, with various scientific, technical, and courses given by specialists and universities on engineering backgrounds have been founded various facets of powder science and technol to study, apply, and promote interest in areas ogy.
Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by Seymour Lowell and published by Springer Science & Business Media. This book was released on 2006-04-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.
Download or read book Powder and Bulk Solids Handling Processes written by Koichi Iinoya and published by Routledge. This book was released on 2017-09-19 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing key issues in the instrumentation of powder handling processes, this up-to-date volumeserves as an excellent source of new ideas for designing on-line instruments, as well as a helpfulguide for understanding and applying measurement principles.Describing physical and chemical principles in clear, simple language, Powder and BulkSolids Handling Processes provides substantial background material that lists related industrialfields and the physical representation of powder properties . . . focuses on instrumentation,reviewing state variables in powder processes . . . discusses the sampling of particles from apowder bed or suspension flow as a basic method for evaluating powder handling processes ... andpresents incisive information on various methods and instruments used for on-line measurement ofpowder flow rate, particle concentration in suspension, level of powder in storage vessels, andmore.Complete with references, equations, illustrations, and tables, this volume is essential reading forchemical, mechanical, systems, ceramic, and civil engineers, instrumentation engineers in powderand bulk solid processes, and upper-level undergraduate and graduate students in chemical andmechanical engineering.
Download or read book Handbook of Conveying and Handling of Particulate Solids written by A. Levy and published by Elsevier. This book was released on 2001-10-22 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents comprehensive coverage of the technology for conveying and handling particulate solids. Each chapter covers a different topic and contains both fundamentals and applications. Usually, each chapter, or a topic within a chapter, starts with one of the review papers. Chapter 1 covers the characterization of the particulate materials. Chapter 2 covers the behaviour of particulate materials during storage, and presents recent developments in storage and feeders design and performance. Chapter 3 presents fundamental studies of particulate flow, while Chapters 4 and 5 present transport solutions, and the pitfalls of pneumatic, slurry, and capsule conveying. Chapters 6, 7 and 8 cover both the fundamentals and development of processes for particulate solids, starting from fluidisation and drying, segregation and mixing, and size-reduction and enlargement. Chapter 9 presents environmental aspects and the classification of the particulate materials after they have been handled by one of the above-mentioned processes. Finally, Chapter 10 covers applications and developments of measurement techniques that are the heart of the analysis of any conveying or handling system.
Download or read book Characterisation of Bulk Solids written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. The reader will then be in a better position to diagnose solids handling and processing problems in industry, and to deal with experts and equipment suppliers from an informed standpoint. Written for post-graduate engineers, chemical scientists and technologists at all stages of their industrial career, the book will also serve as an ideal primer in any of the specialist areas to inform further study.
Download or read book Processing of Particulate Solids written by J.P. Seville and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over half of the products of the chemical and process industries are sold in a particulate form. The range of such products is vast: from agrochemicals to pigments, from detergents to foods, from plastics to pharmaceuticals. However, surveys of the performance of processes designed to produce particulate products have consistently shown inadequate design and poor reliability. `Particle technology' is a new subject facing new challenges. Chemical and process engineering is becoming less concerned with the design of plants to produce generic simple chemicals (which are often single phase fluids) and is now more concerned with speciality `effect' chemicals which may often be in particulate form. Chemical and process engineers are also being recruited in increasing numbers into areas outside their tranditional fields, such as the food industry, pharmaceuticals and the manufacture of a wide variety of consumer products. This book has been written to meet their needs. It provides comprehensive coverage of the technology of particulate solids, in a form which is both accessible and concise enough to be useful to engineering and science students in the final year of an undergraduate degree, and at Master's level. Although it was written with students of chemical engineering in mind, it will also be of use and interest to students of other disciplines. It comprises an account of the fundamentals of teh subject, illustrated by worked examples, and followed by a wide range of selected applications.
