Download or read book Particle size measurement written by Terence Allen and published by Springer. This book was released on 2013-11-21 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although man's environment, from the interstellar dust to the earth beneath his feet, is composed to a large extent of finely divided material, his knowledge of the propert ies of such materials is surprisingly slight. For many years the scientist has accepted that matter may exist as solids, liquids or gases although the dividing line between the states may often be rather blurred; this classification has been upset by powders, which at rest are solids, when aerated may behave as liquids, and when suspended in gases take on some of the properties of gases. It is now widely recognized that powder technology is a field of study in its own right. The industrial applications of this new science are far reaching. The size of fine particles affects the properties of a powder in many important ways. For example, it determines the setting time of cement, the hiding power of pigments and the activity of chemical catalysts; the taste of food, the potency of drugs and the sintering shrink age of metallurgical powders are also strongly affected by the size of the particles of which the powder is made up. Particle size measurement is to powder technology as thermometry is to the study of heat and is in the same state of flux as thermometry was in its early days. Only in the case of a sphere can the size of a particle be completely described by one number.
Download or read book Powder Technology Series Particle Size Measurement written by Terence Allen and published by . This book was released on 1968 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Size Measurement written by Terence Allen and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fifth edition of the highly successful work first published in 1968, comprising two definitive volumes on particle characterisation. The first volume is devoted to sampling and particle size measurement, while surface area and pore size determination are reviewed in volume 2. Particle size and characterisation are central to understanding powder properties and behaviour. This book describes numerous potential measuring devices, how they operate and their advantages and disadvantages. It comprise a fully comprehensive treatise on the wide range of available equipment with an extensive literature survey, and a list of manufacturers and suppliers. The author's blend of academic and industrial experience results in a readable technical book with information on how to analyse, present, and extract useful information from data. This is an essential reference book for both industrial and academic research workers in a variety of areas including: pharmaceuticals, food science, pollution analysis and control, electronic materials, agricultural products, polymers, pigments and chemicals.
Download or read book Powder Sampling and Particle Size Determination written by T. Allen and published by Elsevier. This book was released on 2003-12-09 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder technology is a rapidly expanding technology and nowhere more than in particle characterization. There has been an explosion of new particle measuring techniques in the past ten year particularly in the field of on-line measurement. One of the main aims of this book is to bring the reader up-to-date with current practices. One important area of interest is the improvements in on-line light scattering instruments and the introduction of ultrasonic on-line devices. Another is the introduction of on-line microscopy, which permits shape analysis in conjunction with particle sizing.Schools of powder technology are common in Europe and Japan but the importance of this subject has only recently been recognised in America with the emergence of the Particle Research Centre (PERC) at the University of Florida in Gainsville. - Details all the latest developments in powder technology - Written by established authority on powder technology- A comprehensive text covering all aspects of powder technology and handling of particulate solids including characterization, handling and applications
Download or read book Particle Size Measurement written by Terence Allen and published by . This book was released on 1999 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle size measurement written by Terence Allen and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Size Measurement written by Terence Allen and published by Springer. This book was released on 1996-12-31 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fifth edition of the highly successful work first published in 1968, comprising two definitive volumes on particle characterisation. The first volume is devoted to sampling and particle size measurement, while surface area and pore size determination are reviewed in volume 2. Particle size and characterisation are central to understanding powder properties and behaviour. This book describes numerous potential measuring devices, how they operate and their advantages and disadvantages. It comprise a fully comprehensive treatise on the wide range of available equipment with an extensive literature survey, and a list of manufacturers and suppliers. The author's blend of academic and industrial experience results in a readable technical book with information on how to analyse, present, and extract useful information from data. This is an essential reference book for both industrial and academic research workers in a variety of areas including: pharmaceuticals, food science, pollution analysis and control, electronic materials, agricultural products, polymers, pigments and chemicals.
Download or read book Particle Size Measurements written by Henk G. Merkus and published by Springer Science & Business Media. This book was released on 2009-01-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the practical aspects of particle size measurement: a major difference with existing books, which have a more theoretical approach. Of course, the emphasis still lies on the measurement techniques. For optimum application, their theoretical background is accompanied by quantitative quality aspects, limitations and problem identification. In addition the book covers the phenomena of sampling and dispersion of powders, either of which may be dominant in the overall analysis error. Moreover, there are chapters on the general aspects of quality for particle size analysis, quality management, reference materials and written standards, in- and on-line measurement, definitions and multilingual terminology, and on the statistics required for adequate interpretation of results. Importantly, a relation is made to product performance, both during processing as well as in final application. In view of its set-up, this book is well suited to support particle size measurement courses.
Download or read book Particle Size Measurement written by Terence Allen and published by . This book was released on 1972 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Size Measurement Surface area and pore size determination written by Terence Allen and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Size Analysis written by N G Stanley-Wood and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Size Analysis reviews the development of particle characterization over the past 25 years and also speculates on its future. Interest in the subject has increased enormously over the years and this book highlights the changes and advances made within the field. This book is comprehensive in its coverage of particle size analysis and includes contributions on such characterization techniques as microscopy using fractal analysis, light diffraction, light scattering with the phase doppler technique, light observation, and photon correlation spectroscopy. A number of chapters address the interest in on-line in-stream particle size analysis and illustrate the progress being made in achieving this long sought after ideal of in-situ in-process particle characterization. Applications to other technological fields are detailed by chapters covering biological systems and the pharmaceutical industry. The subject of surface area determination is considered with particular emphasis on the measurements on porosity of powders, the characterization and comparability of reference materials, and the need for standards. Particle Size Analysis should provide stimulating reading for technologists, scientists, and engineers involved in particle characterization and powder technology worldwide.
Download or read book Powder Surface Area and Porosity written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an introduction to some of the elementary theory and experimental methods used to study the surface area, porosity and density of powders. It may be found useful by those with little or no training in solid surfaces who have the need to quickly learn the rudiments of surface area, density and pore-size measurements. Syosset, New York S. Lowell May, 1983 J. E. Shields Xl List of symbols Use of symbols for purposes other than those indicated in the following list are so defined in the text. Some symbols not shown in this list are defined in the text. d adsorbate cross-sectional area A area; condensation coefficient; collision frequency C BET constant c concentration D diameter; coefficient of thermal diffusion E adsorption potential f permeability aspect factor F flow rate; force; feed rate 9 gravitational constant G Gibbs free energy GS free surface energy h heat of immersion per unit area; height H enthalpy Hi heat of immersion Hsv heat of adsorption BET intercept; filament current k thermal conductivity; specific reaction rate K Harkins-Jura constant I length L heat of liquefaction M mass M molecular weight n number of moles N number of molecules; number of particles N Avagadro's number .
Download or read book Particle Size Enlargement written by C. E. Capes and published by Elsevier. This book was released on 2013-10-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Powder Technology, Volume 1: Particle Size Enlargement is the first of a series which will together form a Handbook of Powder Technology, primarily intended for engineers and scientists working in industry. The scope of the Handbook can be defined as being concerned with that part of chemical engineering which deals with processes involving the handling and treatment of material in solid particulate form. This book deals with methods used to create larger entities from fine particles so that the bulk properties of particulates can be improved. These so-called ""size enlargement"" methods evidently concern a broad spectrum of technical disciplines and industries ranging from the relatively small scale requirements of pharmaceutical manufacturers through the tonnage requirements of the fertilizer and minerals processing industries. A primary objective in preparing this book was to present a generalized account of the many size enlargement techniques scattered throughout these diverse industries, with emphasis on similarities and unifying characteristics whenever possible. The book devotes one chapter to each of the principal methods used to bring particles together into agglomerates: agitation methods— tumbling agglomeration, agitation methods—mixer agglomeration, pressure methods, thermal methods, spray and dispersion methods, and agglomeration from liquids.
Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."
Download or read book Powder Technology written by Hiroaki Masuda and published by CRC Press. This book was released on 2006-11-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing from the third edition of the bestselling Powder Technology Handbook, this book is focused solely on analyzing the fundamental properties and behavior of particles and particle beds. Powder Technology: Fundamentals of Particles, Powder Beds, and Particle Generation concentrates on the most useful analytical methods of o
Download or read book Particle Size Enlargement written by and published by . This book was released on 1980 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powder Sampling and Particle Size Determination written by Terence Allen and published by Elsevier Science Limited. This book was released on 2003 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Important new work in rapidly expanding field of powder technology.
