Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. Includes a critical review of the current key fundamental and technical issues of Ti PM. Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Powder Metallurgy of Titanium written by Ma Qian and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference upon which this work is based fully achieved its objectives and turned out to be the largest international gathering dedicated solely to the topic of titanium processing via powder metallurgy. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 50 peer-reviewed papers are grouped into 8 chapters: PM titanium alloy design and processing developments; Powder Production; Effect of Impurities; Metal Injection Moulding of Titanium; Biomedical Titanium Alloys; Titanium Composites; Forging and Equal-Channel Angular Pressing of Titanium; Laser Cladding, Welding, Slip Casting and Other Processing Developments.
Download or read book Powder Metallurgy of Titanium Alloys written by American Institute of Mining, Metallurgical, and Petroleum Engineers and published by . This book was released on 1980 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Powder Metallurgy and Additive Manufacturing written by Huiping Tang and published by Trans Tech Publications Ltd. This book was released on 2018-05-11 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy of titanium and titanium alloys has been increasingly attracting attention of engineers and researchers for over four decades and the 4th International Conference on Titanium Powder Metallurgy & Additive Manufacturing (PMTi 2017, Xian, China, from 8 to 10 September 2017) was an event that promoted the progress in this area of the materials science and processing technologies.
Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques
Download or read book Titanium Physical Metallurgy Processing and Applications written by F.H. Froes and published by ASM International. This book was released on 2015-02-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book covers all aspects of the history, physical metallurgy, corrosion behavior, cost factors and current and potential uses of titanium. The history of titanium is traced from its early beginnings through the work of Kroll, to the present day broadening market place. Extensive detail on extraction processes is discussed, as well as the various beta to alpha transformations and details of the powder metallurgy techniques.
Download or read book Advances in powder metallurgy written by F.H. Froes and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major reason that there is not more widespread use of titanium and its alloys is the high cost. In this paper, developments in one cost effective approach to fabrication of titanium components – powder metallurgy – is discussed with respect to various aspects of this technology. These aspects are the blended elemental approach, prealloyed techniques, additive layer manufacturing, metal injection molding, spray deposition, far from equilibrium processing (rapid solidification mechanical alloying and vapor deposition) and porous materials. Use of titanium powder for sputtering targets, coating, as a grain refiner in aluminium alloys and fireworks are not addressed.
Download or read book Powder Metallurgy of Titanium Alloys written by Metallurgy Society of AIME Staff and published by . This book was released on with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powder Metallurgy of Titanium II written by Thomas Ebel and published by Trans Tech Publications Ltd. This book was released on 2016-08-12 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises 49 papers presented by international experts from 25 countries on the conference PM Titanium 2015 in Lüneburg, Germany. It gives a comprehensive overview on the technical and scientific status in the field of powder metallurgy of titanium and titanium alloys and points out the most important current research topics in this emerging area. The content covers powder production technologies, processing techniques like additive manufacturing, spark plasma sintering and metal injection moulding, specific application fields like biomaterials and special alloys, microstructures and properties. The conference was the third one of a series of biennial conferences on Powder Pressing, Consolidation and Metallurgy of Titanium, initiated 2011 in Brisbane, Australia.
Download or read book Extractive Metallurgy of Titanium written by Zhigang Zak Fang and published by Elsevier. This book was released on 2019-11-08 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive Metallurgy of Titanium: Conventional and Recent Advances in Extraction and Production of Titanium Metal contains information on current and developing processes for the production of titanium. The methods for producing Ti metal are grouped into two categories, including the reduction of TiCl4 and the reduction of TiO2, with their processes classified as either electrochemical or thermochemical. Descriptions of each method or process include both the fundamental principles of the method and the engineering challenges in their practice. In addition, a review of the chemical and physical characteristics of the product produced by each method is included. Sections cover the purity of titanium metal produced based on ASTM and other industry standards, energy consumption, cost and the potential environmental impacts of the processes. Provides information on new and developing low cost, high integrity methods for titanium metal production Discusses new markets for titanium due to the decreased cost of newly developed processes Covers specific information on new methods, including the chemical and physical characteristics produced
Download or read book Powder Metallurgy written by S. A. Tsukerman and published by Elsevier. This book was released on 2013-10-22 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Metallurgy discusses the production of metal powders and other materials made from it. It defines the meaning of metal powders with some illustrations. The book also identifies the processes similar between the production of metal powder and ceramic products. The technology involved and the variation in the process of metallurgy are covered in some chapters of the book. The book enumerates certain advantages in using powder metallurgy over other processes. Methods such as the reduction of the oxides of metals, electrolysis, thermal dissociation, and chemical disintegration are explained. The origin and improvement made on the method are discussed in detail. The goods created using the process are also explained, as well as the types of metals that are being used. A chapter of the book focuses on the flaws of powder metallurgy. The book will provide useful information to metal smiths, chemists, students, and researchers in the field of chemistry.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Tungsten Powder Metallurgy written by Vincent David Barth and published by . This book was released on 1965 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powder Metallurgy written by G. Dowson and published by Springer. This book was released on 1990 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy, commonly designated by its initial letters asPM or PM, may be defined as the production of useful artefacts from metal powder without passing through the molten state. This introductory text examines the processes by which these powders are produced, and explores their behaviour in the subsequent consolidation stages.
Download or read book Titanium Powder Metallurgy and Additive Manufacturing written by Huiping Tang and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. Includes coverage of the fundamentals of microstructural evolution in titanium alloys Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) Looks at the future of Titanium Additive Manufacturing Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
