Download or read book Post Processing Treatment of InGaZnO Thin Film Transistors for Improved Bias illumination Stress Reliability written by Muhammad Ruhul Hasin and published by . This book was released on 2013 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis work mainly examined the stability and reliability issues of amorphous Indium Gallium Zinc Oxide (a-IGZO) thin film transistors under bias-illumination stress. Amorphous hydrogenated silicon has been the dominating material used in thin film transistors as a channel layer. However with the advent of modern high performance display technologies, it is required to have devices with better current carrying capability and better reproducibility. This brings the idea of new material for channel layer of these devices. Researchers have tried poly silicon materials, organic materials and amorphous mixed oxide materials as a replacement to conventional amorphous silicon layer. Due to its low price and easy manufacturing process, amorphous mixed oxide thin film transistors have become a viable option to replace the conventional ones in order to achieve high performance display circuits. But with new materials emerging, comes the challenge of reliability and stability issues associated with it. Performance measurement under bias stress and bias-illumination stress have been reported previously. This work proposes novel post processing low temperature long time annealing in optimum ambient in order to annihilate or reduce the defects and vacancies associated with amorphous material which lead to the instability or even the failure of the devices. Thin film transistors of a-IGZO has been tested for standalone illumination stress and bias-illumination stress before and after annealing. HP 4155B semiconductor parameter analyzer has been used to stress the devices and measure the output characteristics and transfer characteristics of the devices. Extra attention has been given about the effect of forming gas annealing on a-IGZO thin film. a-IGZO thin film deposited on silicon substrate has been tested for resistivity, mobility and carrier concentration before and after annealing in various ambient. Elastic Recoil Detection has been performed on the films to measure the amount of hydrogen atoms present in the film. Moreover, the circuit parameters of the thin film transistors has been extracted to verify the physical phenomenon responsible for the instability and failure of the devices. Parameters like channel resistance, carrier mobility, power factor has been extracted and variation of these parameters has been observed before and after the stress.
Download or read book Introduction to Thin Film Transistors written by S.D. Brotherton and published by Springer Science & Business Media. This book was released on 2013-04-16 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thin Film Transistors reviews the operation, application and technology of the main classes of thin film transistor (TFT) of current interest for large area electronics. The TFT materials covered include hydrogenated amorphous silicon (a-Si:H), poly-crystalline silicon (poly-Si), transparent amorphous oxide semiconductors (AOS), and organic semiconductors. The large scale manufacturing of a-Si:H TFTs forms the basis of the active matrix flat panel display industry. Poly-Si TFTs facilitate the integration of electronic circuits into portable active matrix liquid crystal displays, and are increasingly used in active matrix organic light emitting diode (AMOLED) displays for smart phones. The recently developed AOS TFTs are seen as an alternative option to poly-Si and a-Si:H for AMOLED TV and large AMLCD TV applications, respectively. The organic TFTs are regarded as a cost effective route into flexible electronics. As well as treating the highly divergent preparation and properties of these materials, the physics of the devices fabricated from them is also covered, with emphasis on performance features such as carrier mobility limitations, leakage currents and instability mechanisms. The thin film transistors implemented with these materials are the conventional, insulated gate field effect transistors, and a further chapter describes a new thin film transistor structure: the source gated transistor, SGT. The driving force behind much of the development of TFTs has been their application to AMLCDs, and there is a chapter dealing with the operation of these displays, as well as of AMOLED and electrophoretic displays. A discussion of TFT and pixel layout issues is also included. For students and new-comers to the field, introductory chapters deal with basic semiconductor surface physics, and with classical MOSFET operation. These topics are handled analytically, so that the underlying device physics is clearly revealed. These treatments are then used as a reference point, from which the impact of additional band-gap states on TFT behaviour can be readily appreciated. This reference book, covering all the major TFT technologies, will be of interest to a wide range of scientists and engineers in the large area electronics industry. It will also be a broad introduction for research students and other scientists entering the field, as well as providing an accessible and comprehensive overview for undergraduate and postgraduate teaching programmes.
Download or read book Physics and Technology of Crystalline Oxide Semiconductor CAAC IGZO written by Shunpei Yamazaki and published by John Wiley & Sons. This book was released on 2016-12-27 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the application of c-axis aligned crystalline In-Ga-Zn oxide (CAAC-IGZO) technology in large-scale integration (LSI) circuits. The applications include Non-volatile Oxide Semiconductor Random Access Memory (NOSRAM), Dynamic Oxide Semiconductor Random Access Memory (DOSRAM), central processing unit (CPU), field-programmable gate array (FPGA), image sensors, and etc. The book also covers the device physics (e.g., off-state characteristics) of the CAAC-IGZO field effect transistors (FETs) and process technology for a hybrid structure of CAAC-IGZO and Si FETs. It explains an extremely low off-state current technology utilized in the LSI circuits, demonstrating reduced power consumption in LSI prototypes fabricated by the hybrid process. A further two books in the series will describe the fundamentals; and the specific application of CAAC-IGZO to LCD and OLED displays. Key features: • Outlines the physics and characteristics of CAAC-IGZO FETs that contribute to favorable operations of LSI devices. • Explains the application of CAAC-IGZO to LSI devices, highlighting attributes including low off-state current, low power consumption, and excellent charge retention. • Describes the NOSRAM, DOSRAM, CPU, FPGA, image sensors, and etc., referring to prototype chips fabricated by a hybrid process of CAAC-IGZO and Si FETs.
Download or read book Amorphous Oxide Semiconductors written by Hideo Hosono and published by John Wiley & Sons. This book was released on 2022-05-17 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: AMORPHOUS OXIDE SEMICONDUCTORS A singular resource on amorphous oxide semiconductors edited by a world-recognized pioneer in the field In Amorphous Oxide Semiconductors: IGZO and Related Materials for Display and Memory, the Editors deliver a comprehensive account of the current status of—and latest developments in—transparent oxide semiconductor technology. With contributions from leading international researchers and exponents in the field, this edited volume covers physical fundamentals, thin-film transistor applications, processing, circuits and device simulation, display and memory applications, and new materials relevant to amorphous oxide semiconductors. The book makes extensive use of structural diagrams of materials, energy level and energy band diagrams, device structure illustrations, and graphs of device transfer characteristics, photographs and micrographs to help illustrate the concepts discussed within. It also includes: A thorough introduction to amorphous oxide semiconductors, including discussions of commercial demand, common challenges faced during their manufacture, and materials design Comprehensive explorations of the electronic structure of amorphous oxide semiconductors, structural randomness, doping limits, and defects Practical discussions of amorphous oxide semiconductor processing, including oxide materials and interfaces for application and solution-process metal oxide semiconductors for flexible electronics In-depth examinations of thin film transistors (TFTs), including the trade-off relationship between mobility and reliability in oxide TFTs Perfect for practicing scientists, engineers, and device technologists working with transparent semiconductor systems, Amorphous Oxide Semiconductors: IGZO and Related Materials for Display and Memory will also earn a place in the libraries of students studying oxides and other non-classical and innovative semiconductor devices. WILEY SID Series in Display Technology Series Editor: Ian Sage, Abelian Services, Malvern, UK The Society for Information Display (SID) is an international society which has the aim of encouraging the development of all aspects of the field of information display. Complementary to the aims of the society, the Wiley-SID series is intended to explain the latest developments in information display technology at a professional level. The broad scope of the series addresses all facets of information displays from technical aspects through systems and prototypes to standards and ergonomics.
Download or read book Organic and Amorphous Metal Oxide Flexible Analogue Electronics written by Vincenzo Pecunia and published by Cambridge University Press. This book was released on 2018-05-17 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed significant research efforts in flexible organic and amorphous-metal-oxide analogue electronics, in view of its formidable potential for applications such as smart sensor systems. This Element provides a comprehensive overview of this growing research area. After discussing the properties of organic and amorphous-metal-oxide technologies relevant to analogue circuits, this Element focuses on their application to two key circuit blocks: amplifiers and analogue-to-digital converters. The Element thus provides a fresh look at the evolution and immediate opportunities of the field, and identifies the remaining challenges for these technologies to become the platform of choice for flexible analogue electronics.
Download or read book Transparent Electronics written by Elvira Fortunato and published by . This book was released on with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxide Semiconductors Volume 1633 written by Steve Durbin and published by Materials Research Society. This book was released on 2014-07-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium R, "Oxide Semiconductors" was held December 1-6 at the 2013 MRS Fall Meeting in Boston, Massachusetts. Oxide semiconductors are poised to take a more active role in modern electronics, particularly in the field of thin film transistors. While many advances have been made in terms of our understanding of fundamental optical and electronic characteristics, there remain many questions in terms of defects, doping, and optimal growth/synthesis conditions. This symposium proceedings volume represents recent advances in growth and characterization of a number of different oxide semiconductors, as well as device fabrication.
Download or read book Technology and Applications of Amorphous Silicon written by Robert A. Street and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the first systematic and complete survey of technology and application of amorphous silicon, a material with a huge potential in electronic applications. The book features contributions by world-wide leading researchers in this field.
Download or read book Chemical Sensor Technology written by Tetsuro Seiyama and published by Elsevier. This book was released on 2013-10-22 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Sensor Technology is a series of annual reviews reporting the latest progress being made in research and technology, both basic and applied, regarding chemical sensors. Chemical sensors continue to grow rapidly in importance encompassing a broad spectrum of technologies covering safety, pollution, fuel economy, medical engineering and industrial processes. Various types of chemical sensors have been devised for detection and monitoring of chemical substances in gases, solutions and organisms, and much work is being done to produce sensitive, selective, reliable and inexpensive sensors. The series aims at contributing to the progress of research and development of chemical sensors. Contributors to the individual volumes are carefully selected by an international editorial board who ensure that as many innovative studies as possible are included. Each article describes a specific topic and is the original work of an expert working in the front lines of chemical sensor research. Contributors are encouraged to describe not only the academic or technological essence of the subject, but also the background and philosophy, evaluation and achievements and future problems. In this way, each topic is described in sufficient depth so as to be useful and stimulating to readers.
Download or read book The Future of Semiconductor Oxides in Next Generation Solar Cells written by Monica Lira-Cantu and published by Elsevier. This book was released on 2017-09-19 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Future of Semiconductor Oxides in Next-Generation Solar Cells begins with several chapters covering the synthesis of semiconductor oxides for NGSCs. Part II goes on to cover the types and applications of NGSCs currently under development, while Part III brings the two together, covering specific processing techniques for NGSC construction. Finally, Part IV discusses the stability of SO solar cells compared to organic solar cells, and the possibilities offered by hybrid technologies. This comprehensive book is an essential reference for all those academics and professionals who require thorough knowledge of recent and future developments in the role of semiconductor oxides in next generation solar cells. - Unlocks the potential of advanced semiconductor oxides to transform Next Generation Solar Cell (NGSC) design - Full coverage of new developments and recent research make this essential reading for researchers and engineers alike - Explains the synthesis and processing of semiconductor oxides with a view to their use in NGSCs
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the application of ferroelectric devices to innovative systems. In particular, the use of these materials as varying capacitors, gyroscope, acoustics sensors and actuators, microgenerators and memory devices will be exposed, providing an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric devices.
Download or read book ZnO Thin Film Transistors for Cost Efficient Flexible Electronics written by Fábio Fedrizzi Vidor and published by Springer. This book was released on 2017-12-28 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the integration, characterization and analysis of cost-efficient thin-film transistors (TFTs), applying zinc oxide as active semiconductors. The authors discuss soluble gate dielectrics, ZnO precursors, and dispersions containing nanostructures of the material, while different transistor configurations are analyzed with respect to their integration, compatibility, and device performance. Additionally, simple circuits (inverters and ring oscillators) and a complementary design employing (in)organic semiconducting materials are presented and discussed. Readers will benefit from concise information on cost-efficient materials and processes, applied in flexible and transparent electronic technology, such as the use of solution-based materials and dispersion containing nanostructures, as well as discussion of the physical fundamentals responsible for the operation of the thin-film transistors and the non-idealities of the device.
Download or read book Transparent Electronics written by Antonio Facchetti and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenge for producing “invisible” electronic circuitry and opto-electronic devices is that the transistor materials must be transparent to visible light yet have good carrier mobilities. This requires a special class of materials having “contra-indicated properties” because from the band structure point of view, the combination of transparency and conductivity is contradictory. Structured to strike a balance between introductory and advanced topics, this monograph juxtaposes fundamental science and technology / application issues, and essential materials characteristics versus device architecture and practical applications. The first section is devoted to fundamental materials compositions and their properties, including transparent conducting oxides, transparent oxide semiconductors, p-type wide-band-gap semiconductors, and single-wall carbon nanotubes. The second section deals with transparent electronic devices including thin-film transistors, photovoltaic cells, integrated electronic circuits, displays, sensors, solar cells, and electro-optic devices. Describing scientific fundamentals and recent breakthroughs such as the first “invisible” transistor, Transparent Electronics: From Synthesis to Applications brings together world renowned experts from both academia, national laboratories, and industry.
Download or read book Advanced Display Technology written by In Byeong Kang and published by Springer Nature. This book was released on 2021-05-20 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-date guide to the AMOLED technologies and applications which have become industry standard in a range of devices, from small mobile displays to large televisions. Unlike other books on the topic, which cover the fundamentals, materials, processing, and manufacturing of OLEDs, this one-stop book discusses the core components, such as TFT backplanes, OLED materials and devices, and driving schematics together in one volume with chapters written by experts from leading international companies in the field of OLED materials and OLED TVs. It also examines emerging areas, such as micro-LEDs, displays using quantum dots, and AR & VR displays. Presenting the latest research trends as well as the basic principles of each topic, this book is intended for undergraduate and postgraduate students taking display-related courses, new researchers, and engineers in related fields.
Download or read book Memristors and Memristive Systems written by Ronald Tetzlaff and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of current research on memristors, memcapacitors and, meminductors. In addition to an historical overview of the research in this area, coverage includes the theory behind memristive circuits, as well as memcapacitance, and meminductance. Details are shown for recent applications of memristors for resistive random access memories, neuromorphic systems and hybrid CMOS/memristor circuits. Methods for the simulation of memristors are demonstrated and an introduction to neuromorphic modeling is provided.
Download or read book Oxide Thin Film Transistors written by K. J. Saji and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent flexible electronics is an emerging technology which makes use of wide band gap semiconductors that can be processed at low temperatures on glass or plastic substrates. Electronic systems that cover large area and curved surfaces together with transparency bring the possibility of numerous applications that are outside the scope of rigid wafer based electronics. Flexible electronics, electronic textiles, a wearable wellness system, and sensory skin are some of the applications of flexible electronics. The key factor in the realization of transparent electronics is the development of high performance fully transparent thin film transistors. Thin film transistors (TFTs) based on transparent conducting amorphous oxide semiconductors (TAOS) such as InGaZnO (IGZO), zinc tin oxide (ZTO), zinc indium tin oxide (ZITO), etc. provide additional functionalities like transparency, high field effect mobility and potential for room temperature processing. The performance of these TAOS based TFTs are superior to their silicon (a-Si:H TFTs) and organic TFTs. Though there are monographs and books on a-Si:H TFTs and organic TFTs, a book on TAOS based TFTs is rare. This book introduces the graduate students and beginners to the field of amorphous semiconductors. The mass production of this kind of TFTs on large area substrates involves the complications associated with controlling the composition of oxide compound semiconductor thin film material. Pulsed laser deposition allows for the growth of an oxide semiconductor in a very high oxygen rich environment while co-sputtering is an effective technique for the growth of a multicomponent film and to control the film chemical composition in a systematic and easy way. These manufacturing aspects will be of interest to those working in the industry. The review on the n channel, p channel TFTs, and the detailed description on the extraction of various TFT parameters like the threshold voltage, field effect mobility, sub threshold slope and on-off ratio etc. will be ready reckoner to those working in the field of transparent electronics.
Download or read book A Second Order ADC Using Sputtered IGZO TFTs written by Ana Paula Pinto Correia and published by Springer. This book was released on 2015-12-29 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books discusses the design, electrical simulation and layout of a 2nd-order ∑∆ analog-to-digital converter (ADC), using oxide thin-film transistors (TFTs) technology. The authors provide a unified view of materials science and electronics engineering, in order to guide readers from both fields through key topics. To accomplish this goal, background regarding materials, device physics, characterization techniques, circuit design and layout is given together with a detailed discussion of experimental data. The final simulation results clearly demonstrate the potential of the proposed circuit-level techniques, which enables the implementation of robust and energy efficient ADCs based on oxide TFTs, for moderate resolutions and conversion-rates.
