Download or read book Post Earthquake Fire Analysis in Urban Structures written by Behrouz Behnam and published by CRC Press. This book was released on 2017-02-03 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Post-earthquake fire is one of the most complicated problems resulting from earthquakes and presents a serious risk to urban structures. Most standards and codes ignore the possibility of post-earthquake fire; thus it is not factored in when determining the ability of buildings to withstand load. This book describes the effects of post-earthquake fire on partially damaged buildings located in seismic urban regions. The book quantifies the level of associated post-earthquake fire effects, and discusses methods for mitigating the risk at both the macro scale and micro scale. The macro scale strategies address urban regions while the micro scale strategies address building structures, covering both existing buildings and those that are yet to be designed.
Download or read book Post earthquake Fire Performance of Building Structures written by Mohmmad Hany Yassin and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Following Earthquake written by Charles Scawthorn and published by ASCE Publications. This book was released on 2005-01-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Technical Council on Lifeline Earthquake Engineering of ASCE. This TCLEE Monograph covers the entire range of fire following earthquake (FFE) issues, from historical fires to 20th-century fires in Kobe, San Francisco, Oakland, Berkeley, and Northridge. FFE has the potential of causing catastrophic losses in the United States, Japan, Canada, New Zealand, and other seismically active countries with wood houses. This comprehensive book on FFE and urban conflagrations provides state-of-the-practice insight on unique issues, such as large diameter flex hose applications by fire and water departments. Topics include: History of past fires; Computer modeling of fire spread in the post-earthquake urban environment; Concurrent damage and fire impacts for water, power gas, communication and transportation systems; Examples of reliable water systems built or designed in San Francisco, Vancouver, Berkeley, and Kyoto; Use of large diameter (5 in.) and ultralarge diameter (12 in.) flex hose for fire fighting and water restoration; and Cost-effectiveness of various FFE mitigation strategies, with a detailed benefit-cost model. Water utility engineers, fire fighting professionals, and emergency response planners will benefit from reading this book.
Download or read book Post earthquake Fire Assessment of Buildings written by American Society of Civil Engineers and published by . This book was released on 2022 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides background for the analysis, design, and assessment of building structural systems under fire following earthquakes.
Download or read book Post Earthquake Fire Analysis in Urban Structures written by Behrouz Behnam and published by CRC Press. This book was released on 2017-02-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Post-earthquake fire is one of the most complicated problems resulting from earthquakes and presents a serious risk to urban structures. Most standards and codes ignore the possibility of post-earthquake fire; thus it is not factored in when determining the ability of buildings to withstand load. This book describes the effects of post-earthquake fire on partially damaged buildings located in seismic urban regions. The book quantifies the level of associated post-earthquake fire effects, and discusses methods for mitigating the risk at both the macro scale and micro scale. The macro scale strategies address urban regions while the micro scale strategies address building structures, covering both existing buildings and those that are yet to be designed.
Download or read book A Conceptual Framework for Assessing Post Earthquake Fire Performance of Buildings written by Jin Kyung Kim and published by . This book was released on 2014 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Earthquakes can severely damage building structural and nonstructural systems and components, including active and passive fire protection and egress systems. If the occurrence of such damage is not anticipated at the design stage, the impact of a post-earthquake fire could be significant, as building and fire protection systems may not perform as expected. Unfortunately, even though both the seismic and fire engineering communities utilize performance- based approaches for designing well-performing and resilient buildings under earthquake and fire hazards respectively, each discipline carries out their associated building performance analyses independently. As a result, fire protection engineers have little guidance as to how to estimate structural and nonstructural building systems and component damage as inputs to help them develop post-earthquake building fire scenarios. To help bridge this gap, a conceptual framework is developed that illustrates how performance-based approaches for earthquake and fire engineering analysis and design can become more integrated for the development of post- earthquake fire scenarios. Using a fictional building in an earthquake prone area as an example, the conceptual framework is implemented to show (a) how earthquake-induced damage to building fire protection systems could be estimated using an earthquake performance assessment tool, (b) how the damage estimates might be translated into physical damage parameters in a way that is meaningful for developing post-earthquake building fire scenarios, (c) how the damage states might be implemented in terms of fire and egress modeling input parameters, and (d) how this information could be used to and compare post-earthquake building fire safety performance to a normal (undamaged) building fire conditions.
Download or read book Structural Fire Performance of Contemporary Post tensioned Concrete Construction written by John Gales and published by Springer. This book was released on 2015-10-19 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SpringerBrief equips readers to develop defensible fire safety designs for a range of concrete structures. It identifies current gaps in the research and provides a more complete understanding of the structural and thermal response of contemporary Post-tensioned (PT) concrete structures to fire. The brief includes chapters on contemporary construction using PT concrete, previous structural fire test research programs, recent research programs, real fire case studies, and current research needs. It explores the progression of PT concrete structures, looking at the sustainability and aesthetic benefits, the ongoing development of stronger concretes, and best practice guidance for improving safety in the event of fire. Designed for practitioners and researchers in fire engineering, this brief is a valuable tool for those studying the impact of fire on concrete, fire safety designs, and building safety optimization. Advanced-level students in civil engineering will also find the content useful.
Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Download or read book Fire Science and Technology 2015 written by Kazunori Harada and published by Springer. This book was released on 2016-10-04 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on topics in the entire spectrum of fire safety science, targeting research in fires, explosions, combustion science, heat transfer, fluid dynamics, risk analysis, structural engineering, and other subjects. The book contributes to a gain in advanced scientific knowledge and presents or advances new ideas in all topics in fire safety science. Two decades ago, the 1st Asia-Oceania Symposium on Fire Science and Technology was held in Hefei, China. Since then, the Asia-Oceania Symposia have grown in size and quality. This book, reflecting that growth, helps readers to understand fire safety technology, design, and methodology in diverse areas including historical buildings, photovoltaic panels, batteries, and electric vehicles.
Download or read book Structures in Fire written by Venkatesh Kodur and published by DEStech Publications, Inc. This book was released on 2010 with total page 1047 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Post earthquake Fire Factor to Improve the Fire Resistance of Damaged Ordinary Reinforced Concrete Structures written by Behrouz Behnam and published by . This book was released on 2013 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Building Assessment in Post Earthquake Fire Environments with Fiber Optical Sensors written by Genda Chen and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Resistant Structures written by Abbas Moustafa and published by BoD – Books on Demand. This book was released on 2012-02-29 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with earthquake-resistant structures, such as, buildings, bridges and liquid storage tanks. It contains twenty chapters covering several interesting research topics written by researchers and experts in the field of earthquake engineering. The book covers seismic-resistance design of masonry and reinforced concrete structures to be constructed as well as safety assessment, strengthening and rehabilitation of existing structures against earthquake loads. It also includes three chapters on electromagnetic sensing techniques for health assessment of structures, post earthquake assessment of steel buildings in fire environment and response of underground pipes to blast loads. The book provides the state-of-the-art on recent progress in earthquake-resistant structures. It should be useful to graduate students, researchers and practicing structural engineers.
Download or read book Post Earthquake Rehabilitation and Reconstruction written by F.Y. Cheng and published by Elsevier. This book was released on 1996-10-14 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damage assessment, rehabilitation, decision-making, social consequences, repair and reconstruction; these are all critical factors for considerations following natural disasters such as earthquakes. In order to address these issues, the United States of America and the Peoples Republic of China regularly organize bilateral symposia/workshops to investigate multiple hazard mitigation, particularly with respect to earthquake engineering. This book contains state-of-the-art reports presented by world-renowned researchers at the US/PRC Sympsosium Workshop on Post-Earthquake Rehabilitation and Reconstruction held in Kunming, Yunnan, China, May 1995. The following key areas are addressed: damage assessment of structures after earthquakes; lessons of post-earthquake recovery, rehabilitation and reconstruction, including public policy, land use options, urban planning, and design; issues in and examples of decision-making, and implementation of rehabilitation and reconstruction plans and policies; repair, strengthening, retrofit and control of structures and lifeline systems, post-earthquake socio-economic problems covering issues of relief and recovery; human and organizational behavior during emergency response, and strategies for improvement; real-time monitoring of earthquake response and damage.
Download or read book NEHRP Recommended Provisions National Earthquake Hazards Reduction Program for Seismic Regulations for New Buildings and Other Structures Commentary written by United States. Federal Emergency Management Agency and published by . This book was released on 2001 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi hazard Approaches to Civil Infrastructure Engineering written by Paolo Gardoni and published by Springer. This book was released on 2016-06-22 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on the development of novel approaches to address one of the most pressing challenges of civil engineering, namely the mitigation of natural hazards. Numerous engineering books to date have focused on, and illustrate considerable progress toward, mitigation of individual hazards (earthquakes, wind, and so forth.). The current volume addresses concerns related to overall safety, sustainability and resilience of the built environment when subject to multiple hazards: natural disaster events that are concurrent and either correlated (e.g., wind and surge); uncorrelated (e.g., earthquake and flood); cascading (e.g., fire following earthquake); or uncorrelated and occurring at different times (e.g., wind and earthquake). The authors examine a range of specific topics including methodologies for vulnerability assessment of structures, new techniques to reduce the system demands through control systems; instrumentation, monitoring and condition assessment of structures and foundations; new techniques for repairing structures that have suffered damage during past events, or for structures that have been found in need of strengthening; development of new design provisions that consider multiple hazards, as well as questions from law and the humanities relevant to the management of natural and human-made hazards.
