Download or read book Polyvinyl Chloride via Suspension Polymerization Cost Analysis PVC E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyvinyl Chloride (PVC) production from vinyl chloride monomer (VCM). The process examined is a typical suspension polymerization process. This report was developed based essentially on the following reference(s): (1) "Poly(Vinyl Chloride)", Ullmann's Encyclopedia of Industrial Chemistry (2) PVC Handbook, 2005 Keywords: Chloroethene, Polychloroethylene, Poly(vinyl chloride)

Download or read book Polyvinyl Chloride via Emulsion Polymerization Process Cost Analysis PVC E13A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyvinyl Chloride (PVC) production from vinyl chloride monomer (VCM). The process examined is a typical emulsion polymerization process. This report was developed based essentially on the following reference(s): (1) "Poly(Vinyl Chloride)", Ullmann's Encyclopedia of Industrial Chemistry (2) PVC Handbook, 2005 Keywords: Chloroethene, Polychloroethylene, Poly(Vinyl Chloride)

Download or read book Polyvinyl Chloride via Bulk Polymerization Process Cost Analysis PVC E12A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyvinyl Chloride (PVC) production from vinyl chloride monomer (VCM). The process examined is a typical bulk polymerization process. This report was developed based essentially on the following reference(s): (1) "Poly(Vinyl Chloride)", Ullmann's Encyclopedia of Industrial Chemistry (2) Fischer, N., "Morphology of Mass PVC", Journal of Vinyl Technology, March 1984, Vol 6, No. 1 Keywords: Chloroethene, Mass Polymerization, Polychloroethylene, Poly(Vinyl Chloride)

Download or read book Mechanical Properties of Solid Polymers written by I. M. Ward and published by . This book was released on 1983-06-27 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, self-contained introduction to solid polymers, the mechanics of their behavior and molecular and structural interpretations. This updated edition provides extended coverage of recent developments in rubber elasticity, relaxation transitions, non-linear viscoelastic behavior, anisotropic mechanical behavior, yield behavior of polymers, breaking phenomena, and other fields.

Download or read book Principles of Polymer Design and Synthesis written by Wei-Fang Su and published by Springer Science & Business Media. This book was released on 2013-10-09 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can a scientist or engineer synthesize and utilize polymers to solve our daily problems? This introductory text, aimed at the advanced undergraduate or graduate student, provides future scientists and engineers with the fundamental knowledge of polymer design and synthesis to achieve specific properties required in everyday applications. In the first five chapters, this book discusses the properties and characterization of polymers, since designing a polymer initially requires us to understand the effects of chemical structure on physical and chemical characteristics. Six further chapters discuss the principles of polymerization reactions including step, radical chain, ionic chain, chain copolymerization, coordination and ring opening. Finally, material is also included on how commonly known polymers are synthesized in a laboratory and a factory. This book is suitable for a one semester course in polymer chemistry and does not demand prior knowledge of polymer science.

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book An Introduction to the Mechanical Properties of Solid Polymers written by I. M. Ward and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the mechanical behaviour of solid polymers. Extensively revised and updated throughout, the second edition now includes new material on mechanical relaxations and anisotropy, composites modelling, non-linear viscoelasticity, yield behaviour and fracture of tough polymers. The accessible approach of the book has been retained with each chapter designed to be self contained and the theory and applications of the subject carefully introduced where appropriate. The latest developments in the field are included alongside worked examples, mathematical appendices and an extensive reference. Fully revised and updated throughout to include all the latest developments in the field Worked examples at the end of the chapter An invaluable resource for students of materials science, chemistry, physics or engineering studying polymer science

Download or read book Polymer Physics written by U.W. Gedde and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of my teaching efforts during the last ten years at the Royal Institute of Technology. The purpose is to present the subject of polymer physics for undergraduate and graduate students, to focus the fundamental aspects of the subject and to show the link between experiments and theory. The intention is not to present a compilation of the currently available literature on the subject. Very few reference citations have thus been made. Each chapter has essentially the same structure: starling with an introduction, continuing with the actual subject, summarizing the chapter in 30D-500 words, and finally presenting problems and a list of relevant references for the reader. The solutions to the problems presented in Chapters 1-12 are given in Chapter 13. The theme of the book is essentially polymer science, with the exclusion of that part dealing directly with chemical reactions. The fundamentals in polymer science, including some basic polymer chemistry, are presented as an introduction in the first chapter. The next eight chapters deal with different phenomena (processes) and states of polymers. The last three chapters were written with the intention of making the reader think practically about polymer physics. How can a certain type of problem be solved? What kinds of experiment should be conducted? This book would never have been written without the help of my friend and adviser, Dr Anthony Bristow, who has spent many hours reading through the manuscript. criticizing the content.

Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.

Download or read book Fundamentals of Polymer Engineering Third Edition written by Anil Kumar and published by CRC Press. This book was released on 2018-12-07 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring the chemistry of synthesis, mechanisms of polymerization, reaction engineering of step-growth and chain-growth polymerization, polymer characterization, thermodynamics and structural, mechanical, thermal and transport behavior of polymers as melts, solutions and solids, Fundamentals of Polymer Engineering, Third Edition covers essential concepts and breakthroughs in reactor design and polymer production and processing. It contains modern theories and real-world examples for a clear understanding of polymer function and development. This fully updated edition addresses new materials, applications, processing techniques, and interpretations of data in the field of polymer science. It discusses the conversion of biomass and coal to plastics and fuels, the use of porous polymers and membranes for water purification, and the use of polymeric membranes in fuel cells. Recent developments are brought to light in detail, and there are new sections on the improvement of barrier properties of polymers, constitutive equations for polymer melts, additive manufacturing and polymer recycling. This textbook is aimed at senior undergraduate students and first year graduate students in polymer engineering and science courses, as well as professional engineers, scientists, and chemists. Examples and problems are included at the end of each chapter for concept reinforcement.

Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.

Download or read book Industrial Environmental Chemistry written by Donald T. Sawyer and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph consists of manuscripts submitted by invited speakers who participated in the symposium "Industrial Environmental Chemistry: Waste Minimization in Industrial Processes and Remediation of Hazardous Waste," held March 24-26, 1992, at Texas A&M University. This meeting was the tenth annual international symposium sponsored by the Texas A&M Industry-University Cooperative Chemistry Program (IUCCP). The program was developed by an academic-industrial steering committee consisting of the co-chairmen, Professors Donald T. Sawyer and Arthur E. Martell of the Texas A&M University Chemistry Department, and members appointed by the sponsoring companies: Bernie A. Allen, Jr., Dow Chemical USA; Kirk W. Brown, Texas A&M University; Abraham Clearfield, Texas A&M University; Greg Leyes, Monsanto Company; Jay Warner, Hoechst-Celanese Corporation; Paul M. Zakriski, BF Goodrich Company; and Emile A. Schweikert, Texas A&M University (IUCCP Coordinator). The subject of this conference reflects the interest that has developed in academic institutions and industry for technological solutions to environmental contamination by industrial wastes. Progress is most likely with strategies that minimize waste production from industrial processes. Clearly the key to the protection and preservation of the environment will be through R&D that optimizes chemical processes to minimize or eliminate waste streams. Eleven of the papers are directed to waste minimization. An additional ten papers discuss chemical and biological remediation strategies for hazardous wastes that contaminate soils, sludges, and water.

Download or read book Analysis and Design of Machine Elements written by Wei Jiang and published by John Wiley & Sons. This book was released on 2019-01-30 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporating Chinese, European, and International standards and units of measurement, this book presents a classic subject in an up-to-date manner with a strong emphasis on failure analysis and prevention-based machine element design. It presents concepts, principles, data, analyses, procedures, and decision-making techniques necessary to design safe, efficient, and workable machine elements. Design-centric and focused, the book will help students develop the ability to conceptualize designs from written requirements and to translate these design concepts into models and detailed manufacturing drawings. Presents a consistent approach to the design of different machine elements from failure analysis through strength analysis and structural design, which facilitates students’ understanding, learning, and integration of analysis with design Fundamental theoretical topics such as mechanics, friction, wear and lubrication, and fluid mechanics are embedded in each chapter to illustrate design in practice Includes examples, exercises, review questions, design and practice problems, and CAD examples in each self-contained chapter to enhance learning Analysis and Design of Machine Elements is a design-centric textbook for advanced undergraduates majoring in Mechanical Engineering. Advanced students and engineers specializing in product design, vehicle engineering, power machinery, and engineering will also find it a useful reference and practical guide.

Download or read book Green Biocomposites written by Mohammad Jawaid and published by Springer. This book was released on 2017-02-11 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept, design and application of green biocomposites, with a specific focus on the current demand for green biocomposites for automotive and aerospace components. It discusses the mathematical background, innovative approaches to physical modelling, analysis and design techniques. Including numerous illustrations, tables, case studies and exercises, the text summarises current research in the field. It is a valuable reference resource for researchers, students and scientists working in the field of materials science.

Download or read book Gravity Sanitary Sewer Design and Construction written by Paul Bizier and published by Amer Society of Civil Engineers. This book was released on 2007 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASCE MOP 60 & WEF MOP FD-5 provides theoretical and practical guidelines for the design and construction of gravity sanitary sewers.

Download or read book Algae Based Polymers Blends and Composites written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2017-06-19 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algae Based Polymers, Blends, and Composites: Chemistry, Biotechnology and Material Sciences offers considerable detail on the origin of algae, extraction of useful metabolites and major compounds from algal bio-mass, and the production and future prospects of sustainable polymers derived from algae, blends of algae, and algae based composites. Characterization methods and processing techniques for algae-based polymers and composites are discussed in detail, enabling researchers to apply the latest techniques to their own work. The conversion of bio-mass into high value chemicals, energy, and materials has ample financial and ecological importance, particularly in the era of declining petroleum reserves and global warming. Algae are an important source of biomass since they flourish rapidly and can be cultivated almost everywhere. At present the majority of naturally produced algal biomass is an unused resource and normally is left to decompose. Similarly, the use of this enormous underexploited biomass is mainly limited to food consumption and as bio-fertilizer. However, there is an opportunity here for materials scientists to explore its potential as a feedstock for the production of sustainable materials. - Provides detailed information on the extraction of useful compounds from algal biomass - Highlights the development of a range of polymers, blends, and composites - Includes coverage of characterization and processing techniques, enabling research scientists and engineers to apply the information to their own research and development - Discusses potential applications and future prospects of algae-based biopolymers, giving the latest insight into the future of these sustainable materials

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.