Download or read book Polyvinyl Chloride via Emulsion Polymerization Process Cost Analysis PVC E13A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyvinyl Chloride (PVC) production from vinyl chloride monomer (VCM). The process examined is a typical emulsion polymerization process. This report was developed based essentially on the following reference(s): (1) "Poly(Vinyl Chloride)", Ullmann's Encyclopedia of Industrial Chemistry (2) PVC Handbook, 2005 Keywords: Chloroethene, Polychloroethylene, Poly(Vinyl Chloride)
Download or read book Polyvinyl Chloride via Bulk Polymerization Process Cost Analysis PVC E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyvinyl Chloride (PVC) production from vinyl chloride monomer (VCM). The process examined is a typical bulk polymerization process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Poly(Vinyl Chloride)", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Chloroethene, Mass Polymerization, Polychloroethylene, Poly(Vinyl Chloride)
Download or read book Polyvinyl Chloride via Suspension Polymerization Cost Analysis PVC E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyvinyl Chloride (PVC) production from vinyl chloride monomer (VCM). The process examined is a typical suspension polymerization process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Poly(Vinyl Chloride)", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Chloroethene, Polychloroethylene, Poly(vinyl chloride)
Download or read book Source Assessment written by Z. S. Khan and published by . This book was released on 1978 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PVC written by George Matthews and published by CRC Press. This book was released on 1996 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study on the production, properties and uses, of PVC, Polyvinyl chloride which is the world's third-most widely produced synthetic plastic polymer by the Institute of Materials, London in 1996
Download or read book The History of P V C written by Morris Kaufman and published by . This book was released on 1969 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Environmental Chemistry written by Donald T. Sawyer and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph consists of manuscripts submitted by invited speakers who participated in the symposium "Industrial Environmental Chemistry: Waste Minimization in Industrial Processes and Remediation of Hazardous Waste," held March 24-26, 1992, at Texas A&M University. This meeting was the tenth annual international symposium sponsored by the Texas A&M Industry-University Cooperative Chemistry Program (IUCCP). The program was developed by an academic-industrial steering committee consisting of the co-chairmen, Professors Donald T. Sawyer and Arthur E. Martell of the Texas A&M University Chemistry Department, and members appointed by the sponsoring companies: Bernie A. Allen, Jr., Dow Chemical USA; Kirk W. Brown, Texas A&M University; Abraham Clearfield, Texas A&M University; Greg Leyes, Monsanto Company; Jay Warner, Hoechst-Celanese Corporation; Paul M. Zakriski, BF Goodrich Company; and Emile A. Schweikert, Texas A&M University (IUCCP Coordinator). The subject of this conference reflects the interest that has developed in academic institutions and industry for technological solutions to environmental contamination by industrial wastes. Progress is most likely with strategies that minimize waste production from industrial processes. Clearly the key to the protection and preservation of the environment will be through R&D that optimizes chemical processes to minimize or eliminate waste streams. Eleven of the papers are directed to waste minimization. An additional ten papers discuss chemical and biological remediation strategies for hazardous wastes that contaminate soils, sludges, and water.
Download or read book Plastics Forming written by John D. Beadle and published by . This book was released on 1971 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Adhesive Technology Revised and Expanded written by Antonio Pizzi and published by CRC Press. This book was released on 2003-08-06 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Adhesive Technology, Second Edition exceeds the ambition of its bestselling forerunner by reexamining the mechanisms driving adhesion, categories of adhesives, techniques for bond formation and evaluation, and major industrial applications. Integrating modern technological innovations into adhesive preparation and application, this greatly expanded and updated edition comprises a total of 26 different adhesive groupings, including three new classes. The second edition features ten new chapters, a 40-page list of resources on adhesives, and abundant figures, tables, equations.
Download or read book High Voltage Engineering written by C. L. Wadhwa and published by New Age International. This book was released on 2006-12 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Voltage Engineering has been written for the undergraduate students in Electrical Engineering of Indian and foreign universities as well as the practising engineers. It deals in mechanism of breakdown of insulating materials, generation and measurement of high A.C., D.C., impulse voltages and currents. High voltage testing of some of the electrical equipments e.g. insulators, cables, transformers as per standard specifications has been explained. Various methods of non destructive testing which yield information regarding life expectancy and the long term stability or otherwise of the insulating materials have been discussed. The book takes a view of various types of transients in power system and suggests classical and more modern statistical methods of co-ordinating the insulation requirements of the system.
Download or read book Characterisation of Polymers by Thermal Analysis written by W.M. Groenewoud and published by Elsevier. This book was released on 2001-05-21 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis (TA) has become an indispensable family of analytical techniques in the polymer research. The increased importance of these techniques can be seen as the result of three more or less parallel developments:• a tempestuous development of TA measuring techniques in combination with a high degree of automation,• the strongly increased understanding of the underlaying theory and,• the increasing knowledge of the relation between the polymers' chemical structure and their physical properties. These areas are still in their developmental stages, especially the third area. The increasing knowledge of the dependence of physical properties on chemical structure just accentuated more and more the need for accurate thermoanalytical measurements, and this knowledge is very important for the first stages of the development of new polymeric systems. Besides, the contribution of TA remains necessary for the technical and commercial development of such a new polymer system. The use of the various TA techniques in these processes is described in this book in nine chapters, while chapter ten illustrates the information obtained about different polymers during special case studies. This book illustrates in this way, applications of a wide variety of TA techniques whilst it is written from a materials characterisation rather than from a TA point of view with attention being paid to the chemical structure/physical properties correlations.
Download or read book Polymer Science and Technology written by Robert O. Ebewele and published by CRC Press. This book was released on 2000-03-23 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your search for the perfect polymers textbook ends here - with Polymer Science and Technology. By incorporating an innovative approach and consolidating in one volume the fundamentals currently covered piecemeal in several books, this efficient text simplifies the learning of polymer science. The book is divided into three main sections: po
Download or read book Advances in Machining of Composite Materials written by Islam Shyha and published by Springer Nature. This book was released on 2021-06-21 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.
Download or read book Environmental Impacts of Traditional and Innovative Forest based Bioproducts written by Andreja Kutnar and published by Springer. This book was released on 2016-03-21 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive description of traditional and innovative forest-based bioproducts, from pulp and paper, wood-based composites and wood fuels to chemicals and fiber-based composites. The descriptions of different types of forest-based bioproducts are supplemented by the environmental impacts involved in their processing, use, and end-of-life phase. Further, the possibility of reusing, recycling and upgrading bioproducts at the end of their projected life cycle is discussed. As the intensity of demand for forest biomass is currently changing, forest-based industries need to respond with innovative products, business models, marketing and management. As such, the book concludes with a chapter on the bioproducts business and these products’ role in bioeconomies.
Download or read book Textile Sizing written by Bhuvenesh C. Goswami and published by CRC Press. This book was released on 2004-02-13 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helping you keep pace with rapid developments in the field, Textile Sizing documents the rapidly changing scenario in textile processing and research in sizing. The authors analyze new fibers, spinning methods, and weaving techniques affecting textile production and studies the impact of fiber properties, yarn quality, sizing processes and materials, and chemical and mechanical phenomena on efficient textile manufacturing and development. Numerous tables dispersed throughout the text provide specific guidance on the wide range of processes involved in textile sizing. Illustrating the necessity and value of sizing techniques in the modern textile industry, this reference helps you Predict the efficiency of their sizing methods Master process controls, warping and sizing operations, and modern instrumentation techniques Analyze developments in draw warping and system sizing for reduction of operating costs Understand the importance of desizing and its effect on size recovery and environmental pollution Study the behavior of the warp during weaving and the structural differences between various yarns Textile Sizing is invaluable for physical, surface, colloid, textile, materials, polymer, plastics, and fiber chemists; industrial, manufacturing, textile, fiber, and composite engineers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Computational Rheology written by Robert G. Owens and published by World Scientific Publishing Company. This book was released on 2002 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work traces the development of numerical methods for non-Newtonian flows from the late 1960s to 2001. It begins with broad coverage of non-Newtonian fluids, including their mathematical modelling and analysis, and then specific computational techniques are discussed.
Download or read book Polyimides written by Malay Ghosh and published by CRC Press. This book was released on 2018-02-06 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage on the full range of topics associated with polyimides, including structure, polymer fundamentals, and product areas. The text addresses both basic and applied aspects of the subject. It details the synthesis of polyimides, polyamideimides, and flourinated polyimides, explains the molecular design of photosensitive polyimides, and more.
