Download or read book PVC Degradation and Stabilization written by George Wypych and published by Elsevier. This book was released on 2015-03-18 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: PVC stabilization, the most important aspect of formulation and performance of this polymer, is discussed in details. This book contains all information required to design successful stabilization formula for any product made out of PVC. Separate chapters review information on chemical structure, PVC manufacturing technology, morphology, degradation by thermal energy, UV, gamma, other forms of radiation, mechanodegradation, and chemical degradation. The chapter on analytical methods used in studying of degradative and stabilization processes helps in establishing system of checking results of stabilization with different stabilizing systems. Stabilization and stabilizers are discussed in full detail in the most important chapter of this book. The final chapter contains information on the effects of PVC and its additives on health, safety and environment. This book contains analysis of all essential papers and patents published until recently on the above subject. It either locates the answers to relevant questions and offers solutions or gives references in which such answers can be found. PVC Degradation and Stabilization is must to have for chemists, engineers, scientists, university teachers and students, designers, material scientists, environmental chemists, and lawyers who work with polyvinyl chloride and its additives or have any interest in these products. This book is the one authoritative source on the subject. A practical and up-to-date reference guide for engineers and scientists designing with PVC Covers thermal, UV, gamma radiation, chemical, and other forms of degradation Includes a critical discussion of the sustainability issues faced by PVC and its additives, as well as health and safety concerns
Download or read book Polyvinyl Chloride Stabilization written by George Wypych and published by Elsevier Publishing Company. This book was released on 1986 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Degradation and Stabilisation of PVC written by J. Owen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyvinyl chloride has played a key role in the development of the plastics industry over the past 40 years and continues to be a polymer of major importance. The reasons for its enormous versatility and range of application derive from a combination of the basic structure which gives rise to a relatively tough and rigid material and its ability to accept a range of plasticisers and other additives which can modify its physical characteristics to produce a range of flexible products. Two major problems, however, have tested the skill and ingenuity of PVC technologists since earliest times. One is the thermal instability of the material at the temperatures required for melt processing and fabrication, and the second is the photochemical instability which until recently has limited the potentially large range of outdoor applications. Both problems have been handled in a commercially satisfactory way by the gradual development of a range of stabilisers, lubricants and other processing aids and the high quality material which has resulted has led to massive utilisation of PVC by industry. Totally adequate stabilisation requires a detailed understanding of the mechanisms by which degradation processes are initiated and propagated. Although great advances have been made in this respect in recent years the problem remains incompletely understood. This book presents an account of the present position and the problems which remain to be solved.
Download or read book PVC Degradation and Stabilization written by George Wypych and published by ChemTec Publishing. This book was released on 2020-03-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: PVC Degradation and Stabilization, Fourth Edition, includes new developments in PVC production, new stabilization methods and mechanisms, new approaches to plasticization, methods of waste reprocessing, accelerated degradation due to electric breakdown, and much more. The book contains all the information necessary for the successful design of stabilization formulas in any PVC-based product. Other topics covered include degradation by thermal energy, UV, gamma and other forms of radiation, chemical degradation, and more. Analytical methods for studying degradative and stabilization processes aid readers in establishing a system for verifying results of stabilization with different stabilizing systems. Many new topics included in this edition are of particular interest today. These comprise new developments in PVC production yielding range of new grades, new stabilization methods and mechanisms (e.g. synergistic mixtures containing hydrotalcites and their synthetic equivalents, beta-diketones, functionalized fillers, Shiff bases), new approaches to plasticization, methods of waste reprocessing (life cycle assessment, reformulation, biodegradable materials, and energy recovery), accelerated degradation due to electric breakdown, and many more Revised to include cutting-edge research, patent updates and other information required to design successful stabilization in PVC-based products Covers chemical structure, PVC manufacturing technology, morphology, degradation by thermal energy, mechanodegradation, and more Includes a chapter on the analytical methods used in studying degradative and stabilization processes Discusses information on the effects of PVC and its additives on health, safety and the environment
Download or read book Polyvinyl Chloride Degradation written by George Wypych and published by Elsevier Publishing Company. This book was released on 1985 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book PVC Degradation Stabilization written by George Wypych and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photostabilization of Polymers written by J.F. Rabek and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, the production of polymers and plastics has been increasing rapidly. In spite of developing new polymers and polymeric materials, only 40-60 are used commercially on a large scale. It has been estimated that half of the annual production of polymers is employed outdoors. Increasing the stability of polymers and plastics towards heat, light, atmospheric oxygen and other environmental agents and weathering conditions has always been a very important problem. The photochemical instability of most of polymers limits them to outdoor application, where they are photo degraded fast over periods ranging from months to a few years. To the despair of technologists and consumers alike, photodegrada tion and environmental ageing of polymers occur much faster than can be expected from knowledge collected in laboratories. In many cases, improved methods of preparation and purification of both monomers and polymers yield products of better quality and higher resistance to heat and light. However, without stabilization of polymers by applica tion of antioxidants (to decrease thermal oxidative degradation) and photostabilizers (to decrease photo-oxidative degradation) it would be impossible to employ polymers and plastics in everyday use.
Download or read book Aging and Stabilization of Polymers written by M. B. Neiman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for a broad development of the production of polymer ma terials has become evident. All these materials are subject to various types of aging (destruction); hence, stabilizers which permit the stor age, reprocessing, and use of polymer materials without any appreci able change in their properties must be introduced into them. In recent years, this problem of stabilizing polymers has attracted the attention of many scientists and technologists, both in the USSR and abroad. The scientific basis of the foreign studies will be found in a number of theo retical premises, but chiefly the theory of chain reactions with un branched chains. In the Soviet Union, the concepts of Academician N. N. Semenov on chain reactions with degenerate branches have become the starting point of theoretical studies of the stabilization and destruction of polymers. Soviet scientists have developed a theory of critical concentrations of antioxidants and have shown that the processes of stabilization have a very complex chemical character. The nature of the polymers them selves greatly affects these processes and consequently, different stabil izers are required for polymers of different structures. In addition, it has been shown that the antioxidants used thus far can not only cause chain termination, but can also initiate oxidation and give rise to de generate branches.
Download or read book PVC Degradation and Stabilization written by George Wypych and published by ChemTec Publishing. This book was released on 2008-05-30 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the global renewal of interest in PVC, this comprehensive book is well timed. Considering that PVC stabilization is the most important part of its formulation and performance, only four books have ever been published on this subject, and none since the 1980s. This book contains information on: chemical structure; PVC manufacturing technology; morphology; degradation by thermal energy and UV, gamma, and other forms of radiation; mechanodegradation; chemical degradation; analytic methods used in studying degradative and stabilization processes; stabilization; and the effect of PVC and its additives on health, safety, and environment. This is the one authoritative source on this subject.
Download or read book The Stabilization of Polyvinyl Chloride written by Fernand Chevassus and published by . This book was released on 1963 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PVC Handbook written by Charles E. Wilkes and published by Hanser Gardner Publications. This book was released on 2005 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this single handbook, the editors aim to give a diverse audience of readers a complete account of all aspects of PVC--from monomer manufacture to polymerization; the gamut of such additives as stabilizers, lubricants, plasticizers, impact modifiers, fillers and reinforcing agents; blends and alloys; compounding and processing; characterization; combustion resistance and weatherability; product engineering design; applications; environmental and safety; and finally the PVC industry dynamics. This handbook contains both practical formulation information as well as a mechanistic view of why PVC behaves as it does.
Download or read book Organic Polymer Chemistry written by K. J. Saunders and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the organic chemistry of polymers which find technological use as adhesives, fibres, paints, plastics and rubbers. For the most part, only polymers which are of commercial significance are considered and the primary aim of the book is to relate theoretical aspects to industrial practice. The book is mainly intended for use by students in technical institutions and universities who are specializing in polymer science and by graduates who require an introduction to this field. Several excellent books have recently appeared dealing with the physical chemistry of polymers but the organic chemistry of polymers has not received so much attention. In recognition of this situation and because the two aspects of polymer chemistry are often taught separately, this book deals specifically with organic chemistry and topics of physical chemistry have been omitted. Also, in this way the book has been kept to a reasonable size. This is not to say that integration of the two areas of polymer science is undesirable; on the contrary, it is of the utmost importance that the inter-relationship should b~ appreciated. I wish to record my thanks to my colleagues with whom I have had many helpful discussions, particularly Mrs S. L. Radchenko. I also thank Miss E. Friesen for obtaining many books and articles on my behalf and Mr H. Harms for encouragement and assistance. I am also grateful to Mrs M. Stevens who skilfully prepared the manuscript. Department of Chemical and Metallurgical Technology, Ryerson Polytechnical Institute, K. J. S.
Download or read book Practical Guide to Polyvinyl Chloride written by Stuart Patrick and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyvinyl chloride (PVC) has been around since the late part of the 19th century, although it was not produced commercially until the 1920s; it is the second largest consumed plastic material after polyethylene. PVC products can be rigid or flexible, opaque or transparent, coloured, and insulating or conducting. There is not just one PVC but a whole family of products tailor-made to suit the needs of each application. PVC is extremely cost effective in comparison to other plastics with a high degree of versatility in end-use and processing possibilities, as the reader will note from this book. It is durable, easily maintained, and can be produced in a large range of colours. As a result PVC finds use in an extensive range of applications in virtually all areas of human activity, including medical equipment, construction applications such as flexible roof membranes, pipes and window profiles, toys, automotive parts and electrical cabling. The PVC industry has also started to tackle some of its end-of-life issues. This practical guide provides comprehensive background on the resins and additives, their properties and processing characteristics, as well as discussion of product design and development issues. There have been, and still are, issues and perceptions over environmental and health acceptance covering vinyl chloride monomer, dioxins, phthalate plasticisers, and lead (and cadmium) based heat stabilisers and these are discussed in depth in this book. This book will be of interest to raw materials suppliers and processors or end-users of PVC, as well as anyone with a general interest in this versatile material: resins and additives properties and testing design issues processing, including post processing and assembly property enhancement sustainable development
Download or read book Synthetic Rubbers Their Chemistry and Technology written by D.C. Blackley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origin in a proposal made a few years ago that I should collaborate with Dr H. J. Stern in the production of a third edition of his well-known text-book entitled Rubber: Natural and Synthetic. The sugges tion was that I should contribute a series of chapters on synthetic rubbers. Although, in the event, it has not proved possible to publish the full book in the form originally planned, it was apparent that, with some restructuring, the material which I had collected would be valuable as an independent summary of the chemistry and technology of synthetic rubbers. It is in this form that the material is now offered. The primary purpose of this book is to provide a brief up-to-date survey of the principal types of synthetic rubber which have been and are currently available. Two classes of material are included which are regarded by some as being thermoplastics rather than rubbers, namely, plasticised polyvinyl chloride and the thermoplastic synthetic rubbers. The topics which are covered for each main family of synthetic rubbers are (i) the sources of the monomers, (ii) polymerisation procedures and the effects of important polymerisation variables upon the rubber produced, (iii) the types of rubber currently available commercially, (iv) interesting aspects of the compounding of the rubbers, with special reference to such matters as vulcanisation, reinforcement, protection against degradation, and (where appropriate) plasticisation, and (v) an indication of applications.
Download or read book Advances in Polymer Sciences and Technology written by Bhuvanesh Gupta and published by Springer. This book was released on 2018-11-01 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers presented at the annual meeting of the Asian Polymer Association. The chapters in this volume document and report on a wide range of significant recent results for various applications, as well as scientific developments in the areas of polymer science and engineering. The chapters include original research from all areas of polymer science and technology with a focus on the manufacture, processing, analysis and application of long chain polymer molecules. This book will be of interest to researchers in academia and industry alike.
Download or read book Chemistry of Chlorine containing Polymers written by Karl Samoĭlovich Minsker and published by . This book was released on 2000 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry of Chlorine-Containing Polymers - Syntheses, Degradation, Stabilization
Download or read book Polymer Additives written by Jiri E. Kresta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the beginning of the plastics and rubber industry, it was realized that useful products could be produced only if cer tain additives were incorporated into polymers. With the help of these additives, when physically dispersed in a polymer matrix, it has been possible to improve stability against thermal, oxidative, UV, hydrolytic and biological degradation, mechanical properties, flammability, cost, and processibility of plastics. The enormous growth of the volume of plastics consumed by modern society, and new application areas for plastics, have created a demand for new, better additives and better understanding of their functions in polymer systems. As a result of these trends there is a need for sharing of information on progress achieved in the area of polymer additives among engineers and scientists of the plastics industry and academia. This book is based on expanded and updated papers originally presented at the International Symposium on Polymer Additives, which was held in Las Vegas, Nevada, and was sponsored by the American Chemical Society, Division of Polymeric Materials Science and Engi neering. The book is divided into five parts which cover advances in various areas of polymer additives. The first part is devoted to the progress in understanding of UV degradation and stabilization of various polymers. Oxidation degradation and stabilization of plastic materials is covered in the second part. New developments in the stabilization of PVC are presented in the third part.
