Download or read book Polyvinyl Alcohol written by Vannessa Goodship and published by . This book was released on 2009-07-01 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a number of years, plastic wastes have been accumulating at such a rate that there are now huge environmental concerns with their disposal. Options such as landfill and incineration have not been well received by the public, or indeed government legislation, and focus is now firmly upon the use of biodegradable alternatives for mass applications. One material that has been considered for mass application has been polyvinyl alcohol (PVOH). To date, the use of this material has been confined to comparativey low technology applications such as paper coatings and fibre sizing, which rely upon its inherently poor resistance to moisture to initiate degradation and ultimate disposal. This Rapra Review Report provides a concise introduction to polyvinyl alcohol - the material itself, the processing and applications, and also potential future directions for PVOH.

Download or read book Natural Mineral Nanotubes written by Pooria Pasbakhsh and published by CRC Press. This book was released on 2015-02-04 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a wide introduction on history, minerology, geology, and the characteristics and application of different natural nanotubes. It is the first comprehensive book to discuss natural nanotubes, particularly halloysite nanotubes. The book will be useful mainly for postgraduate students and researchers working on the application of natu

Download or read book Polyvinyl Alcohol Properties and Applications written by C. A. Finch and published by John Wiley & Sons. This book was released on 1973 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of fully and partly hydrolyzed polyvinyl alcohol.--

Download or read book Polyvinyl Alcohol Developments written by C. A. Finch and published by Wiley. This book was released on 1992-07-27 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymeric Cryogels written by Oguz Okay and published by Springer. This book was released on 2014-06-02 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Brief History of Polymeric Cryogels Vladmir I. Lozinsky Basic Principles of Cryotropic Gelation Vladimir I. Lozinsky, Oguz Okay Synthesis, Structure-Property Relationships of Cryogels Oguz Okay, Vladimir I. Lozinsky Kinetic Analysis of Cryotropic Gelation of Poly(vinyl alcohol)/water Solutions by Small-Angle Neutron Scattering Claudio De Rosa, Finizia Auriemma, Rocco Di Girolamo Cryogels via UV Irradiation Technique Petar D. Petrov, Christo B. Tsvetanov Inorganic Cryogels Oleg A. Shlyakhtin Cryogels for Biotechnological Applications Bo Mattiasson Poly(vinyl alcohol) Cryogels for Biomedical Applications Wankei Wan, A. Dawn Bannerman, Lifang Yang, Helium Mak.

Download or read book Materials Processing written by Lorraine F. Francis and published by Elsevier. This book was released on 2024-04-25 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing: A Unified Approach to Processing of Metals, Ceramics and Polymers, Second Edition is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. This fully updated edition includes expanded coverage on additive manufacturing, as well as adding a new section on machining. The organization has been modified and a greater emphasis has been placed on the fundamentals of processing and manufacturing methods. This book can be utilized by upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course. - Includes comprehensive coverage on the fundamental concepts of materials processing - Provides coverage of metals, ceramics, and polymers in one text - Presents examples of both standard and newer additive manufacturing methods throughout - Gives students an overview on the methods that they will likely encounter in their careers

Download or read book Poly vinyl Alcohol written by John G. Pritchard and published by . This book was released on 1970 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymeric Gels written by Kunal Pal and published by Woodhead Publishing. This book was released on 2018-06-15 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Gels: Characterization, Properties and Biomedical Applications covers the fundamentals and applications of polymeric gels. Particular emphasis is given to their synthesis, properties and characteristics, with topics such as natural, synthetic, and smart polymeric gels, medical applications, and advancements in conductive and magnetic gels presented. The book covers the basics and applications of hydrogels, providing readers with a comprehensive guide on the types of polymeric gels used in the field of biomedical engineering. - Provides guidance for decisions on the suitability and appropriateness of a synthetic route and characterization technique for particular polymeric networks - Analyzes and compares experimental data - Presents in-depth information on the physical properties of polymeric gels using mathematical models - Uses an interdisciplinary approach to discuss potential new applications for both established polymeric gels and recent advances

Download or read book Handbook Of Green Materials Processing Technologies Properties And Applications In 4 Volumes written by Kristiina Oksman and published by World Scientific. This book was released on 2014-04-11 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green materials and green nanotechnology have gained widespread interest over the last 15 years; first in academia, then in related industries in the last few years.The Handbook of Green Materials serves as reference literature for undergraduates and graduates studying materials science and engineering, composite materials, chemical engineering, bioengineering and materials physics; and for researchers, professional engineers and consultants from polymer or forest industries who encounter biobased nanomaterials, bionanocomposites, self- and direct-assembled nanostructures and green composite materials in their lines of work.This four-volume set contains material ranging from basic, background information on the fields discussed, to reports on the latest research and industrial activities, and finally the works by contributing authors who are prominent experts of the subjects they address in this set.The four volumes comprise of:The first volume explains the structure of cellulose; different sources of raw material; the isolation/separation processes of nanomaterials from different material sources; and properties and characteristics of cellulose nanofibers and nanocrystals (starch nanomaterials). Information on the different characterization methods and the most important properties of biobased nanomaterials are also covered. The industrial point of view regarding both the processability and access of these nanomaterials, as well as large scale manufacturing and their industrial application is discussed — particularly in relation to the case of the paper industry.The second volume expounds on different bionanocomposites based on cellulose nanofibers or nanocrystals and their preparation/manufacturing processes. It also provides information on different characterization methods and the most important properties of bionanocomposites, as well as techniques of modeling the mechanical properties of nanocomposites. This volume presents the industrial point of view regarding large scale manufacturing and their applications from the perspective of their medical uses in printed electronics and in adhesives.The third volume deals with the ability of bionanomaterials to self-assemble in either liquids or forming organized solid materials. The chemistry of cellulose nanomaterials and chemical modifications as well as different assembling techniques and used characterization methods, and the most important properties which can be achieved by self-assembly, are described. The chapters, for example, discuss subjects such as ultra-light biobased aerogels based on cellulose and chitin, thin films suitable as barrier layers, self-sensing nanomaterials, and membranes for water purification.The fourth volume reviews green composite materials — including green raw materials — such as biobased carbon fibers, regenerated cellulose fibers and thermoplastic and thermoset polymers (e.g. PLA, bio-based polyolefines, polysaccharide polymers, natural rubber, bio-based polyurethane, lignin polymer, and furfurylalchohol). The most important composite processing technologies are described, including: prepregs of green composites, compounding, liquid composite molding, foaming, and compression molding. Industrial applications, especially for green transportation and the electronics industry, are also described.This four-volume set is a must-have for anyone keen to acquire knowledge on novel bionanomaterials — including structure-property correlations, isolation and purification processes of nanofibers and nanocrystals, their important characteristics, processing technologies, industrial up-scaling and suitable industry applications. The handbook is a useful reference not only for teaching activities but also for researchers who are working in this field.

Download or read book Handbook of Thermoplastics written by Olagoke Olabisi and published by CRC Press. This book was released on 2016-02-03 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Handbook of Thermoplastics incorporates recent developments and advances in thermoplastics with regard to materials development, processing, properties, and applications. With contributions from 65 internationally recognized authorities in the field, the second edition features new and updated discussions of seve

Download or read book Frontiers in Materials Processing Applications Research and Technology written by M. Muruganant and published by Springer. This book was released on 2017-11-13 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the select proceedings of FiMPART 2015. The volume covers advances in major areas of materials research under one umbrella. This volume covers all aspects of materials research, processing, fabrication, structure/property evaluation, applications of ferrous, non-ferrous, ceramic, polymeric materials and composites including biomaterials, materials for energy, fuel cells/hydrogen storage technologies, batteries, super-capacitors, nano-materials for energy and structural applications, aerospace structural metallic materials, bulk metallic glasses and other advanced materials. The book will be useful to researchers, students, and professional working in areas related to materials innovation and applications.

Download or read book Polyvinyl Alcohol Property and Applications written by C.A. Finch and published by . This book was released on 1973 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Polyvinyl Alcohol Halloysite Nanotube Bionanocomposites as Biodegradable Packaging Materials written by Zainab Waheed Abdullah and published by Springer Nature. This book was released on 2020-10-10 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the preparation and characterisation of polyvinyl alcohol (PVA)/ halloysite nanotube (HNT) bionanocomposite films with different HNT contents for potential use in food packaging. It examines the effect of material composition and nanofiller content on mechanical, thermal and optical properties in relation to their morphological structures, and also comprehensively describes the water resistance, biodegradation and migration rates of such bionanocomposites, as well as their barrier properties in terms of water vapour transmission, and water vapour, air and oxygen permeabilities. Further, this book discusses the use of Nielsen model and Cussler model to predict the relative permeability of bionanocomposites, demonstrating that Nielsen model is more effective and in better agreement with experimental data obtained. Lastly, it discusses the application of bionanocomposite films in food packaging to prolong the shelf life of freshly cut avocados and peaches.

Download or read book Polyvinyl Alcohol Fibers written by Ichirō Sakurada and published by CRC Press. This book was released on 1985-11-20 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Biointerfaces written by Marián Lehocký and published by MDPI. This book was released on 2020-12-02 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dear Colleagues, Polymer biointerfaces are considered a suitable alternative to the improvement and development of numerous applications. The optimization of polymer surface properties can control several biological processes, such as cell adhesion, proliferation, viability, and enhanced extracellular matrix secretion functions at biointerfaces. This printed Special Issue on Polymer Biointerfaces is focused on fundamental and applied research on polymers and systems with biological origin. Submissions contain both polymer material background and descriptions of interacting biological phenomena or relevance to prospective applications in biomedical, biochemical, biophysical, biotechnological, food, pharmaceutical, or cosmetic fields. Special attention has been given to polymer bio-surface modification, bio-coatings, cell–polymer surface interactions, self-assembling monolayers on polymers, in-vivo and in-vitro systems, protein–polymer surface interaction, polysaccharide–polymer interactions, biotribology, bio chip, biosensors, nano-bio interfaces, coatings, biofilms, adhesion phenomena, and molecular recognition, among others. Assoc. Prof. Marián LehockýAssoc. Prof. Petr HumpolíčekGuest Editors

Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student.Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books.This book covers a wider range of materials and processes than is customary in the elementary materials science books.* Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text* Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works* Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology