Download or read book Polytrimethylene Terephthalate Production Cost Analysis PTT E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polytrimethylene Terephthalate (PTT) production starting from glucose syrup and terephthalic acid. The process examined combines a process similar to DuPont process for generating propanediol and a process similar to Degussa (now Evonik) process for producing PTT. In this process, a 70 wt% glucose-water syrup is used as raw material. This report was developed based essentially on the following reference(s): Keywords: 1,3-Polypropylene Terephthalate, TPA, Dimethyl Terephthalate, DMT, Bio-PDO, Trimethylene Glycol, PTT, Aerobic Fermentation

Download or read book Polytrimethylene Terephthalate Production Cost Analysis PTT E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polytrimethylene Terephthalate (PTT) production from terephthalic acid and propanediol. The process examined is similar to Degussa (now Evonik) process. This report was developed based essentially on the following reference(s): (1) US Patent 7223830, issued to Zimmer in 2007 (assigned to Lurgi Zimmer GmbH in 2008) (2) EP Patent 0859020, issued to Zimmer and Degussa (now Evonik) in 2006 (3) US Patent 68007, issued to Zimmer and Shell in 2004 (assigned to Lurgi Zimmer GmbH in 2008) Keywords: 1,3-Polypropylene Terephthalate, TPA, PDO, Dimethyl Terephthalate, DMT

Download or read book Polytrimethylene Terephthalate Production Cost Analysis PTT E31B written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polytrimethylene Terephthalate (PTT) production starting from raw sugar and terephthalic acid. The process examined combines a process similar to DuPont process for generating propanediol and a process similar to Degussa (now Evonik) process for producing PTT. In this process, raw sugar (sucrose) is diluted and sucrose is hydrolyzed into glucose and fructose (invert sugars). The invert sugars are then fermented to produce Propanediol. This report was developed based essentially on the following reference(s): Keywords: 1,3-Polypropylene Terephthalate, TPA, Dimethyl Terephthalate, DMT, Bio-PDO, Trimethylene Glycol, PTT, Aerobic Fermentation

Download or read book Polyethylene Terephthalate Production Process Cost Analysis PET E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Terephthalate (PET) production from ethylene glycol and purified terephthalic acid (PTA). The process examined is a typical melt-phase polymerization followed by solid-state polymerization. In this process, initially an oligomer intermediate is produced by the esterification of PTA with ethylene glycol. The oligomer then undergoes a melt-polymerization and a solid-state polymerization, leading to a bottle grade PET. This report was developed based essentially on the following reference(s): (1) "Polyesters, Thermoplastic", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) "Polyesters", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Thermoplastic Polymer, Polyester, High Intrinsic Viscosity, Melt-Phase Polycondensation

Download or read book Polyethylene Terephthalate Production Process Cost Analysis PET E12A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Terephthalate (PET) production from ethylene glycol and purified terephthalic acid (PTA). The process examined is similar to Invista NG3 process. In this process, PET oligomers are first polymerized in a melt-phase step, and then passed through a solid-state polymerization step. This report was developed based essentially on the following reference(s): US Patents 5786443 and 5730913, both issued to DuPont in 1998 (both assigned to Invista in 2004) Keywords: Thermoplastic Polymer, Polyester, High Intrinsic Viscosity, Melt-Phase Polycondensation

Download or read book Polybutylene Terephthalate Production from DMT Cost Analysis PBT E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polybutylene Terephthalate (PBT) production from dimethyl terephthalate (DMT). The process examined is a typical transesterification and polycondensation process. This report was developed based essentially on the following reference(s): Keywords: Polyester, Bishydroxybutyl Terephthalate, HBT, Melt Polymerization, Solid State Polymerization

Download or read book Polyethylene Furanoate Production from Glucose Cost Analysis PEF E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production starting from glucose and monoethylene glycol (MEG). The process examined is similar to the Avantium YXY process, followed by a process that copolymerizes FDCA and MEG. In this process, a 70 wt% glucose-water syrup feed is isomerized to fructose. Then, fructose is converted to methoxy methyl furan (MMF) intermediate, which is oxidized to FDCA. This process generates methyl acetate and methyl levulinate as by-products. The FDCA generated and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF. This report was developed based essentially on the following reference(s): (1) US Patent 8519167, issued to Furanix Technologies B.V. in 2013 (2) US Patent 20160024039, issued to Furanix Technologies B.V. in 2016 (3) WO Patent 2015137807, issued to Furanix Technologies in 2015 Keywords: Polyethylene Furanoate, PEF, Green FDCA, Hydroxyl Methyl Furfural, HMF, Purified Terephthalic Acid, Polyethylene 2,5-Furandicarboxylate, MEG

Download or read book Plastic Waste and Recycling written by Trevor M. Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Engineering Materials 1 written by M. F. Ashby and published by . This book was released on 1996 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a broad introduction to the properties of materials used in engineering applications, and is intended to provide a course in engineering materials for students with no previous background in the subject.

Download or read book Algae Based Polymers Blends and Composites written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2017-06-19 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algae Based Polymers, Blends, and Composites: Chemistry, Biotechnology and Material Sciences offers considerable detail on the origin of algae, extraction of useful metabolites and major compounds from algal bio-mass, and the production and future prospects of sustainable polymers derived from algae, blends of algae, and algae based composites. Characterization methods and processing techniques for algae-based polymers and composites are discussed in detail, enabling researchers to apply the latest techniques to their own work. The conversion of bio-mass into high value chemicals, energy, and materials has ample financial and ecological importance, particularly in the era of declining petroleum reserves and global warming. Algae are an important source of biomass since they flourish rapidly and can be cultivated almost everywhere. At present the majority of naturally produced algal biomass is an unused resource and normally is left to decompose. Similarly, the use of this enormous underexploited biomass is mainly limited to food consumption and as bio-fertilizer. However, there is an opportunity here for materials scientists to explore its potential as a feedstock for the production of sustainable materials. Provides detailed information on the extraction of useful compounds from algal biomass Highlights the development of a range of polymers, blends, and composites Includes coverage of characterization and processing techniques, enabling research scientists and engineers to apply the information to their own research and development Discusses potential applications and future prospects of algae-based biopolymers, giving the latest insight into the future of these sustainable materials

Download or read book Toxicity Testing in the 21st Century written by National Research Council and published by National Academies Press. This book was released on 2007-10-05 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in molecular biology and toxicology are paving the way for major improvements in the evaluation of the hazards posed by the large number of chemicals found at low levels in the environment. The National Research Council was asked by the U.S. Environmental Protection Agency to review the state of the science and create a far-reaching vision for the future of toxicity testing. The book finds that developing, improving, and validating new laboratory tools based on recent scientific advances could significantly improve our ability to understand the hazards and risks posed by chemicals. This new knowledge would lead to much more informed environmental regulations and dramatically reduce the need for animal testing because the new tests would be based on human cells and cell components. Substantial scientific efforts and resources will be required to leverage these new technologies to realize the vision, but the result will be a more efficient, informative and less costly system for assessing the hazards posed by industrial chemicals and pesticides.

Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications Highly visual full color graphics facilitate understanding of materials concepts and properties Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: Text and figures have been revised and updated throughout The number of worked examples has been increased by 50% The number of standard end-of-chapter exercises in the text has been doubled Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology

Download or read book Automotive Handbook written by Robert Bosch and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A pocket-sized technical reference designed to provide reliable data, at a practical level, for automotive engineers and mechanics.

Download or read book Polylactic Acid written by Lee Tin Sin and published by William Andrew. This book was released on 2019-06-15 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polylactic Acid: A Practical Guide for the Processing, Manufacturing, and Applications of PLA, Second Edition, provides a practical guide for engineers and scientists working in PLA and on the development of emerging new products. The current market situation for PLA and biodegradable polymers is described, along with applications across a range of market sectors. In addition, the mechanical, chemical, thermal, rheology and degradation properties are included. Updates include new chapters covering various processing methods, as well as recycling methods, and additives and processing aids. New applications cover a range of products (including 3D Printing), and an environmental assessment, including regulatory aspects. The book is not only a useful introduction to this topic, but also a practical, readily applicable reference book that will support decision-making in the plastics industry. Presents an essential reference for engineers, scientists and product designers considering switching to a sustainable plastic Covers the properties, synthesis and polymerization of PLA, along with processing techniques involved in fabricating parts from this polymer Includes critical new chapters on processing, additives, recycling and environmental considerations relating to PLA

Download or read book Dosage Form Design Parameters written by and published by Academic Press. This book was released on 2018-07-25 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dosage Form Design Parameters, Volume II, examines the history and current state of the field within the pharmaceutical sciences, presenting key developments. Content includes drug development issues, the scale up of formulations, regulatory issues, intellectual property, solid state properties and polymorphism. Written by experts in the field, this volume in the Advances in Pharmaceutical Product Development and Research series deepens our understanding of dosage form design parameters. Chapters delve into a particular aspect of this fundamental field, covering principles, methodologies and the technologies employed by pharmaceutical scientists. In addition, the book contains a comprehensive examination suitable for researchers and advanced students working in pharmaceuticals, cosmetics, biotechnology and related industries. Examines the history and recent developments in drug dosage forms for pharmaceutical sciences Focuses on physicochemical aspects, prefomulation solid state properties and polymorphism Contains extensive references for further discovery and learning that are appropriate for advanced undergraduates, graduate students and those interested in drug dosage design

Download or read book Combustion and Incineration Processes written by Walter R. Niessen and published by CRC Press. This book was released on 2002-02-28 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering each aspect of an incineration facility, from contaminant receipt and storage to stack discharge and dispersion, this reference explores the operation and evaluation of incineration systems for hazardous and non-hazardous gaseous, liquid, sludge, and solid wastes. Highlighting breakthroughs in air pollution control, the book discusses advances in materials handling, waste processing, refractory and materials engineering, combustion technology, and energy recovery to reduce and control toxins and pollutants in the environment. It includes a disk containing spreadsheets for practical analyses of waste characteristics and combustion systems.

Download or read book Technology Grade 9 written by Ria de Jager and published by . This book was released on 2013-07-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Study & Master Technology Grade 8 has been specially developed by experienced educators to meet all the requirements of the Curriculum and Assessment Policy Statement (CAPS).