Download or read book Polysilicon Surface Micromachined Capacitive Sensors and Interface Circuits written by Xiaofeng Yang (M.S.) and published by . This book was released on 1997 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CMOS MEMS written by Henry Baltes and published by John Wiley & Sons. This book was released on 2013-03-26 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of 'CMOS-MEMS' was originally published in the successful series 'Advanced Micro & Nanosystems'. Here, the combination of the globally established, billion dollar chip mass fabrication technology CMOS with the fascinating and commercially promising new world of MEMS is covered from all angles. The book introduces readers to this fi eld and takes them from fabrication technologies and material charaterization aspects to the actual applications of CMOS-MEMS - a wide range of miniaturized physical, chemical and biological sensors and RF systems. Vital knowledge on circuit and system integration issues concludes this in-depth treatise, illustrating the advantages of combining CMOS and MEMS in the first place, rather than having a hybrid solution.
Download or read book Silicon Sensors and Circuits written by R.F. Wolffenbuttel and published by Springer Science & Business Media. This book was released on with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Polysilicon Sensor Array Made by a Combined Surface and Bulk Micromachining written by Rafael Blatt and published by . This book was released on 1995 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integration of Polysilicon Surface Micromachined Capacitite Pressure Sensors Into CMOS Processes written by Eamon Hynes and published by . This book was released on 2001 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro g Silicon Accelerometers with High Performance CMOS Interface Circuitry written by Navid Yazdi and published by . This book was released on 1999 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultra Low Power Capacitive Sensor Interfaces written by Wouter Bracke and published by Springer Science & Business Media. This book was released on 2007-06-15 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes ultra low power capacitive sensor interfaces, and presents the realization of a very low power generic sensor interface chip that is adaptable to a broad range of capacitive sensors. The book opens by reviewing important design aspects for autonomous sensor systems, discusses different building blocks, and presents the modular architecture for the generic sensor interface chip. Finally, the generic sensor interface chip is shown in state-of-the-art applications.
Download or read book Transducers 01 Eurosensors XV written by Ernst Obermeier and published by Springer. This book was released on 2016-05-12 with total page 1763 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference is the premier international meeting for the presentation of original work addressing all aspects of the theory, design, fabrication, assembly, packaging, testing and application of solid-state sensors, actuators, MEMS, and microsystems.
Download or read book Circuits at the Nanoscale written by Krzysztof Iniewski and published by CRC Press. This book was released on 2018-10-08 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuits for Emerging Technologies Beyond CMOS New exciting opportunities are abounding in the field of body area networks, wireless communications, data networking, and optical imaging. In response to these developments, top-notch international experts in industry and academia present Circuits at the Nanoscale: Communications, Imaging, and Sensing. This volume, unique in both its scope and its focus, addresses the state-of-the-art in integrated circuit design in the context of emerging systems. A must for anyone serious about circuit design for future technologies, this book discusses emerging materials that can take system performance beyond standard CMOS. These include Silicon on Insulator (SOI), Silicon Germanium (SiGe), and Indium Phosphide (InP). Three-dimensional CMOS integration and co-integration with Microelectromechanical (MEMS) technology and radiation sensors are described as well. Topics in the book are divided into comprehensive sections on emerging design techniques, mixed-signal CMOS circuits, circuits for communications, and circuits for imaging and sensing. Dr. Krzysztof Iniewski is a director at CMOS Emerging Technologies, Inc., a consulting company in Vancouver, British Columbia. His current research interests are in VLSI ciruits for medical applications. He has published over 100 research papers in international journals and conferences, and he holds 18 international patents granted in the United States, Canada, France, Germany, and Japan. In this volume, he has assembled the contributions of over 60 world-reknown experts who are at the top of their field in the world of circuit design, advancing the bank of knowledge for all who work in this exciting and burgeoning area.
Download or read book The MEMS Handbook written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2001-09-27 with total page 1386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revolution is well underway. Our understanding and utilization of microelectromechanical systems (MEMS) are growing at an explosive rate with a worldwide market approaching billions of dollars. In time, microdevices will fill the niches of our lives as pervasively as electronics do right now. But if these miniature devices are to fulfill their mammoth potential, today's engineers need a thorough grounding in the underlying physics, modeling techniques, fabrication methods, and materials of MEMS. The MEMS Handbook delivers all of this and more. Its team of authors-unsurpassed in their experience and standing in the scientific community- explore various aspects of MEMS: their design, fabrication, and applications as well as the physical modeling of their operations. Designed for maximum readability without compromising rigor, it provides a current and essential overview of this fledgling discipline.
Download or read book Analog Circuit Design written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today digital signal processing systems use advanced CMOS technologies requiring the analog-to-digital converter to be implemented in the same (digital) technology. Such an implementation requires special circuit techniques. Furthermore the susceptibility of converters to ground bounce or digital noise is an important design criterion. In this part different converters and conversion techniques are described that are optimized for receiver applications. Part II, Sensor and Actuator Interfaces, interfaces for sensors and actuators shape the gates through which information is acquired from the real world into digital information systems, and vice versa. The interfaces should include analog signal conditioning, analog-to-digital conversion, digital bus interfaces and data-acquisition networks. To simplify the use of data-acquisition systems additional features should be incorporated, like self-test, and calibration
Download or read book Micromachining and Microfabrication Process Technology written by and published by . This book was released on 1999 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Sensors written by Ghenadii Korotcenkov and published by Momentum Press. This book was released on 2011-05-06 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical sensors are integral to the automation of myriad industrial processes, as well as everyday monitoring of such activities as public safety, engine performance, medical therapeutics, and many more. This massive reference work will cover all major categories of chemical sensor materials and devices, and their general functional usage...from monitoring and analyzing gases, to analyzing liquids and compounds of all kinds. This is THE reference work on sensors used for chemical detection and analysis. In this fourth volume will be found detailed background on all major classes of solid-state-based chemical sensors including metal oxide-based conductometric gas sensors; Schottky-, FET-, and work-function chemical sensors; capacitance-type chemical sensors; pyroelectric (thermoelectric) gas sensors; some new views on Pellistors; mass-sensitive chemical sensors; acoustic-wave-chemical sensors; and integrated chemical sensors.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2004-01-19 with total page 1232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major work has established itself as the definitive reference in the nanoscience and nanotechnology area in one volume. In presents nanostructures, micro/nanofabrication, and micro/nanodevices. Special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. Reflecting further developments, the new edition has grown from six to eight parts. The latest information is added to fields such as bionanotechnology, nanorobotics, and NEMS/MEMS reliability. This classic reference book is orchestrated by a highly experienced editor and written by a team of distinguished experts for those learning about the field of nanotechnology.
Download or read book ASME Technical Papers written by and published by . This book was released on 1999 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensors for Automotive Applications written by Jiri Marek and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taken as a whole, this series covers all major fields of application for commercial sensors, as well as their manufacturing techniques and major types. As such the series does not treat bulk sensors, but rather places strong emphasis on microsensors, microsystems and integrated electronic sensor packages. Each of the individual volumes is tailored to the needs and queries of readers from the relevant branch of industry. An international team of experts from the leading companies in this field gives a detailed picture of existing as well as future applications. They discuss in detail current technologies, design and construction concepts, market considerations and commercial developments. Topics covered include vehicle safety, fuel consumption, air conditioning, emergency control, traffic control systems, and electronic guidance using radar and video.
Download or read book Advances in Side Airbag Systems written by Donald E Struble and published by SAE International. This book was released on 2005-01-15 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to years of research and development by vehicle manufacturers, suppliers, legislation, and the entire safety community, the side airbag has become a critical safety device to reduce injury and save lives. This new collection of technical research highlights the progression of these essential safety features, providing a complete and thorough perspective through the analysis of both early patents and recent side airbag system developments. Advances in Side Airbag Systems begins with an introduction by editor Donald E. Struble, chronicling the progress made since the mid-1980s in offering improved side impact protection to the motoring public. Authored by leading experts in their respective fields, this book features a comprehensive collection of 26 landmark technical papers. Its scope includes not only thorax airbags, but other inflatable devices designed for side impacts and rollovers. To the extent that technological infrastructure considerations are unique to side airbags, papers in these areas are included as well.
