Download or read book Polypropylene Structure blends and composites written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 1994-12-31 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although polypropylene has been marketed since the 1950s, research and development in this area is still vigorous. The consumption of polypropylene over the years has been relatively high, mainly due to the steady improvement of its property profile. Polypropylene: Structures, Blends and Composites, in three separate volumes, reflects on the key factors which have contributed to the success of polypropylene, dealing with all aspects of structure-performance relationships relevant to thermoplastic polymers and related composites. Volume 1, Structure and Morphology, deals with polymorphism in polypropylene homo- and copolymers, where molecular and supermolecular structures are covered, and the processing-induced structure development of polypropylene, showing the interrelation between the processing-induced morphology and mechanical performance. Volume 2, Copolymers and Blends, contains comprehensive surveys of the nucleation and crystallisation behaviour of the related systems. It includes the development of morphology and its effects on rheological and mechanical properties of polypropylene-based alloys and blends and a review of polypropylene-based thermoplastic elastomers. Volume 3, Composites, gives a comprehensive overview of filled and reinforced systems with polypropylene as a matrix material, with the main emphasis on processing-structure-property-interrelationships. Chapters cover all aspects of particulate filled, chopped fibre-, fibre mat- and continuous fibre-reinforced composites. Interfacial phenomena, such as adhesion, wetting and interfacial crystallisation, are also included as important aspects of this subject.
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Handbook of Polypropylene and Polypropylene Composites Revised and Expanded written by Harutun Karian and published by CRC Press. This book was released on 2003-03-25 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor with completely revised material and six new chapters, the Handbook of Polypropylene and Polypropylene Composites, Second Edition responds to increasing interest and changing global trends in the manufacture and application of polypropylene resin. The authors highlight viable options for the manufacture of polypropylene composites to better accommodate market requirements across various industries. The second edition introduces chapters on high-purity submicron talc fillers with lamellar microstructures, the utilization of Wollastonite fibers for polypropylene reinforcement, and updated material on nanocomposite production using exfoliated clay treated with maleated polypropylene-based materials, among many other topics.
Download or read book Polypropylene Structure blends and Composites written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 1994-12-31 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although polypropylene has been marketed since the 1950s, research and development in this area is still vigorous. The consumption of polypropylene over the years has been relatively high, mainly due to the steady improvement of its property profile. Polypropylene: Structures, Blends and Composites, in three separate volumes, reflects on the key factors which have contributed to the success of polypropylene, dealing with all aspects of structure-performance relationships relevant to thermoplastic polymers and related composites. Volume 1, Structure and Morphology, deals with polymorphism in polypropylene homo- and copolymers, where molecular and supermolecular structures are covered, and the processing-induced structure development of polypropylene, showing the interrelation between the processing-induced morphology and mechanical performance. Volume 2, Copolymers and Blends, contains comprehensive surveys of the nucleation and crystallisation behaviour of the related systems. It includes the development of morphology and its effects on rheological and mechanical properties of polypropylene-based alloys and blends and a review of polypropylene-based thermoplastic elastomers. Volume 3, Composites, gives a comprehensive overview of filled and reinforced systems with polypropylene as a matrix material, with the main emphasis on processing-structure-property-interrelationships. Chapters cover all aspects of particulate filled, chopped fibre-, fibre mat- and continuous fibre-reinforced composites. Interfacial phenomena, such as adhesion, wetting and interfacial crystallisation, are also included as important aspects of this subject.
Download or read book Polyaniline Blends Composites and Nanocomposites written by P.M. Visakh and published by Elsevier. This book was released on 2017-10-31 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyaniline Blends, Composites, and Nanocomposites summarizes recent advances in polyaniline-based blends, composites and nanocomposites. Polyaniline (PANI) is a conducting polymer with a range of potential applications, particularly in electronics and packaging. The book covers the preparation, characterization and application of PANI-based composites, including the structure-property relationship and modification of PANI. It offers an in-depth update on the major findings and observations in the field of polyaniline-based blends, composites and nanocomposites, with contributions from leading researchers in industry, academia, government and private research institutions worldwide. The book is an application-oriented, practical guide to the development and application of this polymeric material. The book includes discussion of reinforcement of polyaniline via addition of carbon-based materials, blends with thermoplastics, thermosets, natural and synthetic rubber, and polyaniline based composites and nanocomposites, with an emphasis on enabling polymer scientists and engineers to more effectively utilize this material in new applications. - Includes an in-depth update on the state of research into this exciting material, with detailed and practical information for developing emerging applications of polyaniline - Enables polymer scientists and engineers to overcome challenges and take advantage of opportunities relating to polyaniline, e.g., solubility of the polymer, improving conductivity and more - Includes detailed coverage of the preparation, characterization and application of PANI-based composites in detail, along with the structure-property relationship and modification of PANI
Download or read book Thermoplastic Elastomers from Rubber plastic Blends written by S. K. De and published by Prentice Hall. This book was released on 1990 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recycled Polymer Blends and Composites written by Hanafi Ismail and published by Springer Nature. This book was released on 2023-10-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an authoritative account of the potential of recycled polymer blends and composites such as recycled rubber, Polypropylene, Poly(Vinylidene Fluoride) (PVDF), polyhydroxybutyrate-3-valerate (PHBV), Polyethylene, and similar compounds, in polymer recycling industries. It highlights the latest research on fundamentals of recycled polymer blends and composites such as physical, chemical, mechanical and thermal properties and morphological studies. The book also provides a comprehensive state of the art review of recycling of polymer blends and composites for sustainability. Polymeric substances recycled from excess sludge in wastewater treatment plants, reinsertion of Poly(Vinylidene Fluoride) (PVDF), polyolefin and Polypropylene post-Industrial waste by primary recycling, as well as the recent development of biomass and COVID-19 plastic waste derived char filled natural starch biocomposite briquettes are also covered.
Download or read book Polypropylene Structure blends and Composites written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although polypropylene has been marketed since the 1950s, research and development in this area is still vigorous. The consumption of polypropylene over the years has been relatively high, mainly due to the steady improvement of its property profile. Polypropylene: Structures, Blends and Composites, in three separate volumes, reflects on the key factors which have contributed to the success of polypropylene, dealing with all aspects of structure-performance relationships relevant to thermoplastic polymers and related composites. Volume 1, Structure and Morphology, deals with polymorphism in polypropylene homo- and copolymers, where molecular and supermolecular structures are covered, and the processing-induced structure development of polypropylene, showing the interrelation between the processing-induced morphology and mechanical performance. Volume 2, Copolymers and Blends, contains comprehensive surveys of the nucleation and crystallisation behaviour of the related systems. It includes the development of morphology and its effects on rheological and mechanical properties of polypropylene-based alloys and blends and a review of polypropylene-based thermoplastic elastomers. Volume 3, Composites, gives a comprehensive overview of filled and reinforced systems with polypropylene as a matrix material, with the main emphasis on processing-structure-property-interrelationships. Chapters cover all aspects of particulate filled, chopped fibre-, fibre mat- and continuous fibre-reinforced composites. Interfacial phenomena, such as adhesion, wetting and interfacial crystallisation, are also included as important aspects of this subject.
Download or read book Polypropylene written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: My heart sank when I was approached by Dr Hastings and by Professor Briggs (Senior Editor of Materials Science and Technology and Series Editor of Polymer Science and Technology Series at Chapman & Hall, respectively) to edit a book with the provisional title Handbook of Poly propylene. My reluctance was due to the fact that my former book [1] along with that of Moore [2], issued in the meantime, seemed to cover the information demand on polypropylene and related systems. Encour aged, however, by some colleagues (the new generation of scientists and engineers needs a good reference book with easy information retrieval, and the development with metallocene catalysts deserves a new update!), I started on this venture. Having some experience with polypropylene systems and being aware of the current literature, it was easy to settle the titles for the book chapters and also to select and approach the most suitable potential contributors. Fortunately, many of my first-choice authors accepted the invitation to contribute. Like all editors of multi-author volumes, I recognize that obtaining contributors follows an S-type curve of asymptotic saturation when the number of willing contributors is plotted as a function of time. The saturation point is, however, never reached and as a consequence, Dear Reader, you will also find some topics of some relevance which are not explicitly treated in this book (but, believe me, I have considered them).
Download or read book Polypropylene Structure Blends and Composites written by J. Karger-Kocsis and published by Springer. This book was released on 1994-12-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although polypropylene has been marketed since the 1950s, research and development in this area is still vigorous. The consumption of polypropylene over the years has been relatively high, mainly due to the steady improvement of its property profile. Polypropylene: Structures, Blends and Composites, in three separate volumes, reflects on the key factors which have contributed to the success of polypropylene, dealing with all aspects of structure-performance relationships relevant to thermoplastic polymers and related composites. Volume 1, Structure and Morphology, deals with polymorphism in polypropylene homo- and copolymers, where molecular and supermolecular structures are covered, and the processing-induced structure development of polypropylene, showing the interrelation between the processing-induced morphology and mechanical performance. Volume 2, Copolymers and Blends, contains comprehensive surveys of the nucleation and crystallisation behaviour of the related systems. It includes the development of morphology and its effects on rheological and mechanical properties of polypropylene-based alloys and blends and a review of polypropylene-based thermoplastic elastomers. Volume 3, Composites, gives a comprehensive overview of filled and reinforced systems with polypropylene as a matrix material, with the main emphasis on processing-structure-property-interrelationships. Chapters cover all aspects of particulate filled, chopped fibre-, fibre mat- and continuous fibre-reinforced composites. Interfacial phenomena, such as adhesion, wetting and interfacial crystallisation, are also included as important aspects of this subject.
Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
Download or read book Handbook of Multiphase Polymer Systems written by Abderrahim Boudenne and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 1322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphase polymeric systems include a wide range of materials such as composites, blends, alloys, gels, and interpenetrating polymer networks (IPNs). A one-stop reference on multiphase polymer systems, this book fully covers the preparation, properties, and applications of advanced multiphase systems from macro to nano scales. Edited by well-respected academics in the field of multiphase polymer systems, the book includes contributions from leading international experts. An essential resource for plastic and rubber technologists, filler specialists and researchers in fields studying thermal and electrical properties.
Download or read book Polymer Blends and Alloys written by George P. Simon and published by Routledge. This book was released on 2019-07-16 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.
Download or read book Polymers written by Bryan Ellis and published by CRC Press. This book was released on 2008-10-29 with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reliable source for scientific and commercial information on over 1,000 polymers, this revised and updated edition features 25 percent new material, including 50 entirely new entries that reflect advances in such areas as conducting polymers, hydrogels, nano-polymers, and biomaterials. The second edition also comes with unlimited access to a complete, fully searchable web version of the reference. Powerful retrieval software allows users to customize their searches and refine results. Each entry includes trade names, properties, manufacturing processes, commercial applications, supplier details, references, and links to constituent monomers.
Download or read book Ceramic matrix composites and other systems written by Antonio Miravete and published by Woodhead Publishing. This book was released on 1993 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Composites written by Klaus Friedrich and published by Springer Science & Business Media. This book was released on 2005-07-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of polymer composites in various engineering applications has become state of the art. This multi-author volume provides a useful summary of updated knowledge on polymer composites in general, practically integrating experimental studies, theoretical analyses and computational modeling at different scales, i. e. , from nano- to macroscale. Detailed consideration is given to four major areas: structure and properties of polymer nanocomposites, characterization and modeling, processing and application of macrocomposites, and mechanical performance of macrocomposites. The idea to organize this volume arose from a very impressive workshop - The First International Workshop on Polymers and Composites at IVW Kaiserslautern: Invited Humboldt-Fellows and Distinguished Scientists, which was held on May 22-24,2003 at the University of Kaiserslautern, Germany. The contributing authors were invited to incorporate updated knowledge and developments into their individual chapters within a year after the workshop, which finally led to these excellent contributions. The success of this workshop was mainly sponsored by the German Alexander von Humboldt Foundation through a Sofia Kovalevskaja Award Program, financed by the Federal Ministry for Education and Research within the "Investment in the Future Program" of the German Government. In 2001, the Humboldt Foundation launched this new award program in order to offer outstanding young researchers throughout the world an opportunity to establish their own work-groups and to develop innovative research concepts virtually in Germany. One of the editors, Z.
Download or read book Polymer Blends Handbook written by L. A. Utracki and published by . This book was released on 2014-01-31 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an international group of highly respected contributors, this fundamental reference work covers all aspects of polymer blends: science, engineering, technology and applications.
