Download or read book Polypropylene Carbonate Production Cost Analysis PPC E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polypropylene Carbonate (PPC) production from propylene oxide (PO) and carbon dioxide. The process examined is based on patents issued to SK Energy. In this process, polymerization reaction is carried out in full-liquid phase, under pressurized atmosphere. This report was developed based essentially on the following reference(s): Keywords: Polypropylene Carbonate, PPC, SK Energy
Download or read book Polyethylene Furanoate Production Cost Analysis PEF E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production from monoethylene glycol (MEG) and 2,5-furandicarboxylic acid (FDCA). In this process, FDCA and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF: melt-phase polymerization and solid-state polymerization. This report was developed based essentially on the following reference(s): (1) WO Patent 2015137807, issued to Furanix Technologies in 2015 (2) US Patent 6749821 issued to UOP in 2004 Keywords: Polyethylene Furanoate, Polyethylene 2,5-Furandicarboxylate, PEF, Green PEF, FDCA, MEG
Download or read book Polypropylene Homopolymer via Bulk Process Cost Analysis PP E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polypropylene (PP) homopolymer production from polymer grade (PG) propylene using a bulk phase process. The process examined is similar to the processes LyondellBasell Spheripol and Mitsui Hypol II. This process is based on the polymerization of liquid PG propylene, in loop reactors, to produce PP homopolymer. This report was developed based essentially on the following reference(s): "Polyolefins", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: PG Propylene, Propene, Tubular Reactor, Liquid-Phase Polymerization
Download or read book Dimethyl Carbonate Production Process Cost Analysis DMC E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Dimethyl Carbonate (DMC) production from methanol The process examined is a typical oxidative carbonylation process. This process is a non-phosgene alternative for DMC production, in which CO, O2 and methanol react in the presence of copper chloride (CuCI) catalyst. Although reaction occurs in the liquid phase, a heterogeneous-phase mixture forms and the product stream is withdrawn from the reactor in vapor phase. The vapor is partially condensed, treated for recovery of catalyst and then subjected to distillation operations. Unreacted methanol is recovered and recycled to the reactor. Purified Dimethyl Carbonate is obtained after separation of side-product water. This report was developed based essentially on the following reference(s): (1) US Patent 20030236428, issued to General Electric Company (2) US Patent 5685957, issued to Enichem Synthesis in 1997 Keywords: Non-Phosgene Process, Phosgene-Free, Oxidative Carbonylation, Enichem, Eni
Download or read book Propylene Production via Metathesis Cost Analysis Propylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Propylene production from ethylene and raffinate-2 using a metathesis process. The process examined is similar to CB&I Lummus Technology's Olefins Conversion Technology (OCT). In this process, Polymer Grade Propylene is produced through a metathesis reaction of ethylene with 2-butene, present in raffinate-2 feedstock. This report examines one-time costs associated with the construction of a plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in process unit (ISBL); infrastructure (OSBL), contingency and owner's cost - Total fixed capital required, divided in process unit (ISBL); infrastructure (OSBL), contingency and owner's cost - Working capital and costs incurred during industrial plant commissioning and start-up * Operating cost, broken down by: - Variable operating costs (raw materials, utilities) - Fixed operating costs (maintenance, operating charges, plant overhead, local taxes and insurance) - Depreciation This report was developed based essentially on the following reference(s): (1) US Patent 8440874, issued to Lummus Technology and BASF in 2013 (2) US Patent 20050124839, issued to Lummus Technology in 2005 Keywords: PG Propylene, Olefins Disproportionation, Lummus OCT, Olefins Metathesis, Phillips Triolefin, Propene, Ethene, Butylene, On-Purpose Propylene Production
Download or read book Polypropylene Homopolymer via Bulk Process Cost Analysis Polypropylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polypropylene (PP) homopolymer production from polymer grade (PG) propylene using a bulk phase polymerization process. The process examined is similar to the processes LyondellBasell Spheripol and Mitsui Hypol II. This process is based on the polymerization of liquid PG propylene, in loop reactors, to produce PP homopolymer. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Polyolefins", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: PG Propylene, Propene, Tubular Reactor, Liquid-Phase Polymerization
Download or read book Polycarbonate Production from BPA Cost Analysis PC E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polycarbonate (PC) production from bisphenol A (BPA) and phosgene. The process examined is a typical interfacial process. In this process, BPA, dissolved in an aqueous solution, is reacted with phosgene, in an organic solution, at the interface of the two-phase mixture. The carbonate oligomers produced are then polycondensed to Polycarbonate resin. This report was developed based essentially on the following reference(s): "Polycarbonates", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Thermoplastic Polymer, Interfacial Polymerization, Polycondensation
Download or read book Diphenyl Carbonate from Phosgene and Phenol Cost Analysis DPC E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Diphenyl Carbonate (DPC) production from phosgene and phenol. The process examined is a typical interfacial process. This report was developed based essentially on the following reference(s): "Carbonic Esters", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Phenyl Carbonate, Phosgenation, Fixed-Bed Reactor
Download or read book Ethylene Propylene Rubber Production Cost Analysis EPDM E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Propylene (EPDM) Rubber production from polymer grade (PG) propylene and ethylene. The process examined is a typical suspension polymerization process. This report was developed based essentially on the following reference(s): (1) US Patent 2016/0312021, issued to Arlanxeo in 2016 (2) US Patent 5729911 issued to Bayer in 1998 Keywords: Ethylene Propylene Diene Monomer (M-Class) Rubber, EPDM Rubber, Montecatini Edison
Download or read book Polyisoprene Production Cost Analysis Polyisoprene E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyisoprene production from isoprene. The process examined is a typical solution polymerization process. This report was developed based essentially on the following reference(s): Keywords: Synthetic Rubber, Goodyear, Goodrich, Snamprogetti, Ziegler Catalyst
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book CO2 Sequestration and Valorization written by Claudia R. V. Morgado and published by BoD – Books on Demand. This book was released on 2014-03-12 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reconciliation of economic development, social justice and reduction of greenhouse gas emissions is one of the biggest political challenges of the moment. Strategies for mitigating CO2 emissions on a large scale using sequestration, storage and carbon technologies are priorities on the agendas of research centres and governments. Research on carbon sequestration is the path to solving major sustainability problems of this century a complex issue that requires a scientific approach and multidisciplinary and interdisciplinary technology, plus a collaborative policy among nations. Thus, this challenge makes this book an important source of information for researchers, policymakers and anyone with an inquiring mind on this subject.
Download or read book Advances in Lightweight Materials and Structures written by A. Praveen Kumar and published by Springer Nature. This book was released on 2020-10-13 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advanced Lightweight Materials and Structures (ICALMS) 2020, and discusses the triad of processing, structure, and various properties of lightweight materials. It provides a well-balanced insight into materials science and mechanics of both synthetic and natural composites. The book includes topics such as nano composites for lightweight structures, impact and failure of structures, biomechanics and biomedical engineering, nanotechnology and micro-engineering, tool design and manufacture for producing lightweight components, joining techniques for lightweight structures for similar and dissimilar materials, design for manufacturing, reliability and safety, robotics, automation and control, fatigue and fracture mechanics, and friction stir welding in lightweight sandwich structures. The book also discusses latest research in composite materials and their applications in the field of aerospace, construction, wind energy, automotive, electronics and so on. Given the range of topics covered, this book can be a useful resource for beginners, researchers and professionals interested in the wide ranging applications of lightweight structures.
Download or read book Carbon Dioxide Mineralization and Utilization written by Pen-Chi Chiang and published by Springer. This book was released on 2017-03-04 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on an important technology for mineralizing and utilizing CO2 instead of releasing it into the atmosphere. CO2 mineralization and utilization demonstrated in the waste-to-resource supply chain can “reduce carbon dependency, promote resource and energy efficiency, and lessen environmental quality degradation,” thereby reducing environmental risks and increasing economic benefits towards Sustainable Development Goals (SDG). In this book, comprehensive information on CO2 mineralization and utilization via accelerated carbonation technology from theoretical and practical considerations was presented in 20 Chapters. It first introduces the concept of the carbon cycle from the thermodynamic point of view and then discusses principles and applications regarding environmental impact assessment of carbon capture, storage and utilization technologies. After that, it describes the theoretical and practical considerations for “Accelerated Carbonation (Mineralization)” including analytical methods, and systematically presents the carbonation mechanism and modeling (process chemistry, reaction kinetics and mass transfer) and system analysis (design and analysis of experiments, life cycle assessment and cost benefit analysis). It then provides physico-chemical properties of different types of feedstock for CO2 mineralization and then explores the valorization of carbonated products as green materials. Lastly, an integral approach for waste treatment and resource recovery is introduced, and the carbonation system is critically assessed and optimized based on engineering, environmental, and economic (3E) analysis. The book is a valuable resource for readers who take scientific and practical interests in the current and future Accelerated Carbonation Technology for CO2 Mineralization and Utilization.
Download or read book Science and Application of Nanotubes written by D. Tománek and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science, and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E-mail: thorpe@pa. msu. edu East Lansing, Michigan V PREFACE It is hard to believe that not quite ten years ago, namely in 1991, nanotubes of carbon were discovered by Sumio Iijima in deposits on the electrodes of the same carbon arc apparatus that was used to produce fullerenes such as the “buckyball”. Nanotubes of carbon or other materials, consisting ofhollow cylinders that are only a few nanometers in diameter, yet up to millimeters long, are amazing structures that self-assemble under extreme conditions. Their quasi-one-dimensional character and virtual absence of atomic defects give rise to a plethora of unusual phenomena.
Download or read book Advanced Polymers in Medicine written by Francesco Puoci and published by Springer. This book was released on 2014-12-02 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an up-to-date overview of the diverse medical applications of advanced polymers. The book opens by presenting important background information on polymer chemistry and physicochemical characterization of polymers. This serves as essential scientific support for the subsequent chapters, each of which is devoted to the applications of polymers in a particular medical specialty. The coverage is broad, encompassing orthopedics, ophthalmology, tissue engineering, surgery, dentistry, oncology, drug delivery, nephrology, wound dressing and healing, and cardiology. The development of polymers that enhance the biocompatibility of blood-contacting medical devices and the incorporation of polymers within biosensors are also addressed. This book is an excellent guide to the recent advances in polymeric biomaterials and bridges the gap between the research literature and standard textbooks on the applications of polymers in medicine.
Download or read book UMTA MA written by and published by . This book was released on 1980 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
