Download or read book Polyolefin Compounds and Materials written by Mariam Al-Ali AlMa'adeed and published by Springer. This book was released on 2015-12-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.
Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2009-09-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasizes the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. With major sections for each additive function, this book provides a highly practical guide for engineers and scientists creating and using polyolefin compounds, who will find in this book a wealth of detail and practical guidance. This unique resource will enable them to make practical decisions about the use of the various additives, fillers, and reinforcements specific to this family of materials. ABOUT THE AUTHOR Michael Tolinski is a freelance writer and a lecturer at the University of Michigan's College of Engineering. He is a frequent contributor to Plastics Engineering and Manufacturing Engineering. - Structured to make it easy for the reader to find solutions for specific property requirements - Contains a number of short case studies about companies that have used or developed a particular additive to achieve a desired result - Covers environmental resistance, mechanical property enhancement, appearance enhancement, processing aids, and other modifications of form and function
Download or read book Handbook of Polyolefins written by Cornelia Vasile and published by CRC Press. This book was released on 2000-06-21 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2015-03-17 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additives for Polyolefins is a unique quick-reference resource for those who create or use polyethylene and polypropylene compounds—the most commercially important family of plastic materials, making up close to half of the volume all plastics produced and used. These polymers would be useless without various additives. The book focuses on polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasises the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. In this new edition, product tables have been updated with the most current product and company names, new case studies have been added, the role of nanofillers is discussed in greater detail, and the book concludes with a discussion on blending and handling additives, along with an entirely new chapter on how engineers can approach the issue of sustainability when choosing an additive. - Assesses capabilities and costs of a range of additives to enable engineers and scientists to make the correct selection for their property requirements - Provides concise, practical information about the purpose and use of specific additives, fillers, and reinforcements – demystifying the world of additives by providing clear, engineering explanations, and including real-world application case stories - Updated to include additional material on nanofillers, blending and handling, and sustainability
Download or read book Food Contact Materials Analysis written by Michele Suman and published by Royal Society of Chemistry. This book was released on 2019-01-25 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass spectrometric techniques have developed over recent years to offer ever increasing solutions to solving problems in food processing and packaging. Even the smallest amount of contamination in food can cause a problem for food production companies, thus they are keen to find speedy and efficient quality control methods. This book outlines how ingredients and their interrelationship with processing and packaging have developed with the exploitation of mass spectrometry and gives practical protocols to stake holders showing the flexibility of this technique. With huge relevance worldwide, this book will appeal to food packaging scientists and mass spectrometry practitioners alike.
Download or read book Advances in Polyolefins written by R.B. Seymour and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book History of Polyolefins written by F.B. Seymour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book History of Polyolefins written by Raymond Benedict Seymour and published by Springer. This book was released on 1986 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word Polyethylene was probably first pronounced in a lecture which M. P. E. Berthelot delivered on April ,27, 1863 to the Chemical Society in Paris, reporting on the "polymerization" of various simple organic compounds (1). Much later this work appeared twice in the literature before the classical ICI breakthrough in the 1930's which is so colorfully described in Ballard's lecture. Once it came up at the end of the last century when H. von Pechmann obtained "a white flocculant material" from the decomposition of diazomethane which, one year later, was termed to be "polymethylene" - (CH ) - from E. Bamberger 2 and F. Tschiemer (1). At that time the investigators were disappointed about this product because it was not what they had expected to find in their experiments. As a result any further work was discontinued. The second time that the word polyethylene appeared in the literature to describe a "white solid powder" was in 1930 when C. S. Marvel and M. E. P. Friedericks (2) attempted to prepare alkylated As compounds in which all five valencies were covalently bonded to five monovalent-aTkyl groups. They reacted Tetra-ethyl-arsenium bromide with butyllithium and expected to get tetra ethyl butyl arsenium. Instead they obtained LiBr + AsEt3 + gaseous products. Delicate and somewhat time-consuming analysis gave a surprising result: ethane and C 's were there in the 4 expected quantities but ethylene was missing - or almost missing - in the gas mixture.
Download or read book Polyolefin Fibres written by S C O Ugbolue and published by Woodhead Publishing. This book was released on 2017-06-09 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefin Fibres: Structure, Properties and Industrial Applications, Second Edition, explores one of the most widely used commercial polymers, with a focus on the most important polyolefins, namely polyethylene, polypropylene, and polyolefin bicomponent fibres. These versatile fibres are durable, chemically resistant, lightweight, economical, and functional. This new edition has been updated and expanded to include cutting-edge research on a broad range of advanced applications. Part I covers the structure and properties of polyolefin fibres, incorporating a new chapter on the environmental aspects of polyolefin use. Part II examines the methods for improving the functionality of polyolefins, providing essential information for those engaged in developing high-performance materials. A final group of chapters addresses how polyolefin fibres can be incorporated into specific textile applications, such as automotive, geotextile, biomedical, and hygiene products, and explores potential future development. This book is an essential reference for textile technologists and manufacturers, polymer and fibre scientists, yarn and fabric manufacturers, biomedical and device engineers, and industrialists and researchers. - Introduces the types, properties and structure of polyolefin fibers for readers new to the polyolefins field - Examines methods to improve the functionality of polyolefin fibers, providing essential information for textile technologists and research and development managers engaged in developing high-performance materials - Presents existing and potential applications of polyolefin fibers, exploring how they can expand the range of commercial polyolefin-based products
Download or read book New Advances in Polyolefins written by T.C. Chung and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefin is one of the most important materials produced in the chemical industry. The research in this area is not only scientifically challenging but also potentially economically rewarding. Many research activities, such as developing new catalysts, understanding polymerization mechanisms, modifying the products and improving the physical properties of the material, have been proceeding at a very fast pace, especially in the industrial laboratories in many countries. It is very important and exciting to bring researchers active in this area, from both the academic and industrial sectors, to communicate their new findings. To the best of my knowledge, a symposium covering diverse aspects of polyolefin research has not been held in the USA for many years. With this in mind, a symposium entitled "Recent Advances in Polyolefins" was held at the National ACS Meeting in Washington D. C. , August 23-28, 1992. This symposium covered both scientific and technological aspects of polyolefin, which included four sections: CatalystIPolymerization, Functionalization of Polyolefins, Blends of Polyolefins with Other Polymers, and Applications. More than 50 papers, including 20 foreign contributions, were presented during three and a half days of meetings. It was truly exciting to see key researchers from both academic and industrial laboratories exchange their recent results and to share the important developments in polyolefins. This volume is based on the same spirit and is intended to capture some of the most recent and emerging technical achievements presented at the meeting.
Download or read book Handbook of Engineering Polymeric Materials written by P. Cheremisinoff and published by CRC Press. This book was released on 1997-07-25 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting practical information on new and conventional polymers and products as alternative materials and end-use applications, this work details technological advancements in high-structure plastics and elastomers, functionalized materials, and their product applications. The book also provides a comparison of manufacturing and processing techniques from around the world. It emphasizes product characterization, performance attributes and structural properties.
Download or read book Functionalization of Polyolefins written by T. C. Chung and published by Academic Press. This book was released on 2002-02-28 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the significant experimental results on the functionalization of polyolefins and classifies them into several chemical methods. This book also provides information on the functional polyolefin materials. It covers: chemical approaches in the functionalization of polyolefins, and polyolefin materials and their potential applications.
Download or read book Polypropylene and other Polyolefins written by S. van der Ven and published by Elsevier. This book was released on 2012-12-02 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with polyolefins prepared via Ziegler-Natta catalysis, from a polymer chemist's viewpoint, i.e. with emphasis on their preparation and on their basic composition and properties. In addition to chapters on catalysts, polymerization behaviour and polymer properties such as tacticity, crystallinity, morphology etc., a chapter is also devoted to characterization methods. The main part of this work is reserved for polypropylene in all its forms, namely, homopolymer, random copolymer and toughened (`block') copolymers, for which extensive own-experience was present. The other polyolefins are also covered by means of a thorough literature review.This book is intended for scientists active in the field of polyolefins, including catalyst development, but should also prove an invaluable medium in academia to illustrate the growth of understanding in catalysis, kinetics and characterization of a commercially very important class of polymers.
Download or read book Plasma Modification of Polyolefins written by N. S. Baneesh and published by Springer Nature. This book was released on 2021-11-22 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses plasma modification of polyolefin surfaces. It comprises 21 chapters divided into three major sections. The first section covers the different techniques used for plasma modification of polyolefin surfaces and the effects of various gases as a surrounding medium, while the second provides a detailed analysis of the physics and chemistry of plasma modification and discusses various innovative characterization techniques, as well as ageing of the modified surface. It focuses on the analysis of changes in polymers’ surface chemistry using various spectroscopic techniques, and of changes in their surface morphology after plasma treatment using optical microscopy, electron microscopy and atomic force microscopy. In addition, it provides detailed information on the characterization of modified polymer surfaces. The book’s third and last section covers a range of applications of plasma-modified polyolefin surfaces varying from the packaging industry to the biomedical field, and shares valuable insights on the lifecycle analysis of plasma modification and modified surfaces.
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Metal Catalysts in Olefin Polymerization written by Zhibin Guan and published by Springer Science & Business Media. This book was released on 2009-03-31 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefin is a major industry that is important for our economy and impacts every aspect of our lives. The discovery of new transition metal-based catalysts is one of the driving forces for the further advancement of this field. Whereas the classical heterogeneous Ziegler-Natta catalysts and homogeneous early transition metal metallocene catalysts remain the workhorses of the polyolefin industry, in roughly the last decade, tremendous progress has been made in developing non-metallocene-based olefin polymerization catalysts. Particularly, the discovery of late transition metal-based olefin polymerization catalysts heralds a new era for this field. These late transition metal complexes not only exhibit high activities rivaling their early metal counterparts, but more importantly they offer unique properties for polymer architectural control and copolymerization with polar olefins. In this book, the most recent major breakthroughs in the development of new olefin polymerization catalysts, including early metal metallocene and non-metallocene complexes and late transition metal complexes, are discussed by leading experts. The authors highlight the most important discoveries in catalysts and their applications in designing new polyolefin-based functional materials.
Download or read book Metallocene Catalyzed Polymers written by George M. Benedikt and published by Cambridge University Press. This book was released on 2008-12-10 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been estimated that within just ten years, over half of all polyolefins will be made by using metallocene catalysts. This ground-breaking volume from PDL brings togetherùfor the first timeùwork from dozens of world-renowned experts on the subject. Fifty chapters of peer-reviewed content offer insights into applications in automotive components, food packaging, insulating films, non-woven fabrics and medical markets, among others.
