Download or read book Polyolefin Composites written by Domasius Nwabunma and published by John Wiley & Sons. This book was released on 2008-01-09 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the properties and applications of polyolefin composites consolidates information to help the reader compare, select, and integrate a material solution as needed. It covers polyolefin microcomposites, polyolefin nanocomposites, and advanced polyolefin nano and molecular composites and discusses processing, morphological characterization, crystallization, structure and properties, and performance evaluation at micro and nano structural levels. It details modeling and simulation, engineering performance properties, and applications. This is a practical, hands-on reference for practicing professionals as well as graduate students.

Download or read book Polyolefin Compounds and Materials written by Mariam Al-Ali AlMa'adeed and published by Springer. This book was released on 2015-12-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.

Download or read book Polyethylene Based Blends Composites and Nanocomposities written by Visakh P. M. and published by John Wiley & Sons. This book was released on 2015-07-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focusses on the recent technical research accomplishments in the area of polyethylene-based blends, composites and nanocomposites by looking at the various aspects of processing, morphology, properties and applications. In particular, the book details the important developments in areas such as the structure-properties relationship of polyethylene; modification of polyethylene with radiation and ion implantation processes; stabilization of irradiated polyethylene by the introduction of antioxidants; reinforcement of polyethylene through carbon-based materials as additives; characterization of carbon-based polyethylenes composites, polyethylene-based blends with thermoplastic and thermoset; characterization of polyethylene-based thermoplastic and thermoset blends; polyethylene-based blends with natural rubber and synthetic rubber; characterization of polyethylene-based natural rubber and synthetic rubber blends; characterization of polyethylene-based composites.

Download or read book Handbook of Polypropylene and Polypropylene Composites Revised and Expanded written by Harutun Karian and published by CRC Press. This book was released on 2003-03-25 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor with completely revised material and six new chapters, the Handbook of Polypropylene and Polypropylene Composites, Second Edition responds to increasing interest and changing global trends in the manufacture and application of polypropylene resin. The authors highlight viable options for the manufacture of

Download or read book Polypropylene Based Biocomposites and Bionanocomposites written by Visakh P. M. and published by John Wiley & Sons. This book was released on 2017-12-22 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses new developments in an up-to-date, coherent and objective set of chapters by eminent researchers in the area of polypropylene-based biocomposites and bionanocomposites. It covers, biomaterials such as cellulose, chitin, starch, soy protein, hemicelluloses, polylactic acid and polyhydroxyalkanoates. Other important topics such as hybrid biocomposites and bionanocomposites of polypropylene, biodegradation study of polypropylene-based biocomposites and bionanocomposites, polypropylene-based bionanocomposites for packaging applications, polypropylene-based carbon nanomaterials reinforced nanocomposites, degradation and flame retardency of polypropylene-based composites and nanocomposites, are covered as well.

Download or read book Handbook of Polyolefins written by Cornelia Vasile and published by CRC Press. This book was released on 2000-06-21 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.

Download or read book Plasma Modification of Polyolefins written by N. S. Baneesh and published by Springer Nature. This book was released on 2021-11-22 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses plasma modification of polyolefin surfaces. It comprises 21 chapters divided into three major sections. The first section covers the different techniques used for plasma modification of polyolefin surfaces and the effects of various gases as a surrounding medium, while the second provides a detailed analysis of the physics and chemistry of plasma modification and discusses various innovative characterization techniques, as well as ageing of the modified surface. It focuses on the analysis of changes in polymers’ surface chemistry using various spectroscopic techniques, and of changes in their surface morphology after plasma treatment using optical microscopy, electron microscopy and atomic force microscopy. In addition, it provides detailed information on the characterization of modified polymer surfaces. The book’s third and last section covers a range of applications of plasma-modified polyolefin surfaces varying from the packaging industry to the biomedical field, and shares valuable insights on the lifecycle analysis of plasma modification and modified surfaces.

Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-26 with total page 1671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.

Download or read book Advances in Polyolefin Nanocomposites written by Vikas Mittal and published by CRC Press. This book was released on 2010-12-07 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of polymer nanocomposites, research on polyolefin nanocomposites has grown exponentially. Correcting the deficiency of a meaningful text on these important materials, Advances in Polyolefin Nanocomposites:Sums up recent advances in nanoscale dispersion of filler in polyolefinsPresents a basic introduction to polyolefin nanocomposite

Download or read book Polymer Composites Macro and Microcomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2012-04-30 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first systematic reference on the topic with an emphasis on the characteristics and dimension of the reinforcement. This first of three volumes, authored by leading researchers in the field from academia, government, industry, as well as private research institutions around the globe, focuses on macro and micro composites. Clearly divided into three sections, the first offers an introduction to polymer composites, discussing the state of the art, new challenges, and opportunities of various polymer composite systems, as well as preparation and manufacturing techniques. The second part looks at macro systems, with an emphasis on fiber reinforced polymer composites, textile composites, and polymer hybrid composites. Likewise, the final section deals with micro systems, including micro particle reinforced polymer composites, the synthesis, surface modification and characterization of micro particulate fillers and flakes as well as filled polymer micro composites, plus applications and the recovery, recycling and life cycle analysis of synthetic polymeric composites.

Download or read book Sustainable Polymer Composites and Nanocomposites written by Inamuddin and published by Springer. This book was released on 2019-02-01 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents emerging economical and environmentally friendly polymer composites that are free of the side effects observed in traditional composites. It focuses on eco-friendly composite materials using granulated cork, a by-product of the cork industry; cellulose pulp from the recycling of paper residues; hemp fibers; and a range of other environmentally friendly materials procured from various sources. The book presents the manufacturing methods, properties and characterization techniques of these eco-friendly composites. The respective chapters address classical and recent aspects of eco-friendly polymer composites and their chemistry, along with practical applications in the biomedical, pharmaceutical, automotive and other sectors. Topics addressed include the fundamentals, processing, properties, practicality, drawbacks and advantages of eco-friendly polymer composites. Featuring contributions by experts in the field with a variety of backgrounds and specialties, the book will appeal to researchers and students in the fields of materials science and environmental science. Moreover, it fills the gap between research work in the laboratory and practical applications in related industries.

Download or read book Additives for Polyolefins written by Michael Tolinski and published by William Andrew. This book was released on 2015-03-17 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additives for Polyolefins is a unique quick-reference resource for those who create or use polyethylene and polypropylene compounds—the most commercially important family of plastic materials, making up close to half of the volume all plastics produced and used. These polymers would be useless without various additives. The book focuses on polyolefin additives that are currently important in the plastics industry, alongside new additives of increasing interest, such as nanofillers and environmentally sustainable materials. As much as possible, each chapter emphasises the performance of the additives in the polymer, and the value each relevant additive brings to polypropylene or polyethylene. Where possible, similar additives are compared by capability and relative cost. In this new edition, product tables have been updated with the most current product and company names, new case studies have been added, the role of nanofillers is discussed in greater detail, and the book concludes with a discussion on blending and handling additives, along with an entirely new chapter on how engineers can approach the issue of sustainability when choosing an additive. - Assesses capabilities and costs of a range of additives to enable engineers and scientists to make the correct selection for their property requirements - Provides concise, practical information about the purpose and use of specific additives, fillers, and reinforcements – demystifying the world of additives by providing clear, engineering explanations, and including real-world application case stories - Updated to include additional material on nanofillers, blending and handling, and sustainability

Download or read book Polyolefins 50 years after Ziegler and Natta II written by Walter Kaminsky and published by Springer. This book was released on 2013-11-29 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.

Download or read book Materials for Biomedical Engineering Thermoset and Thermoplastic Polymers written by Valentina Grumezescu and published by Elsevier. This book was released on 2019-03-21 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Biomedical Engineering: Thermoset and Thermoplastic Polymers presents the newest and most interesting approaches to intelligent polymer engineering in both current and future progress in biomedical sciences. Particular emphasis is placed on the properties needed for each selected polymer and how to increase their biomedical potential in varying applications, such as drug delivery and tissue engineering. These materials are intended for use in diagnoses, therapy and prophylaxis, but are also relatable to other biomedical related applications, such as sensors. Recent developments and future perspectives regarding their use in biomedicine are discussed in detail, making this book an ideal source on the topic. - Highlights the most well-known applications of thermoset and thermoplastic polymers in biological and biomedical engineering - Presents novel opportunities and ideas for developing or improving technologies in materials for companies, those in biomedical industries, and others - Features at least 50% of references from the last 2-3 years

Download or read book Algae Based Polymers Blends and Composites written by Khalid Mahmood Zia and published by Elsevier. This book was released on 2017-06-19 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algae Based Polymers, Blends, and Composites: Chemistry, Biotechnology and Material Sciences offers considerable detail on the origin of algae, extraction of useful metabolites and major compounds from algal bio-mass, and the production and future prospects of sustainable polymers derived from algae, blends of algae, and algae based composites. Characterization methods and processing techniques for algae-based polymers and composites are discussed in detail, enabling researchers to apply the latest techniques to their own work. The conversion of bio-mass into high value chemicals, energy, and materials has ample financial and ecological importance, particularly in the era of declining petroleum reserves and global warming. Algae are an important source of biomass since they flourish rapidly and can be cultivated almost everywhere. At present the majority of naturally produced algal biomass is an unused resource and normally is left to decompose. Similarly, the use of this enormous underexploited biomass is mainly limited to food consumption and as bio-fertilizer. However, there is an opportunity here for materials scientists to explore its potential as a feedstock for the production of sustainable materials. - Provides detailed information on the extraction of useful compounds from algal biomass - Highlights the development of a range of polymers, blends, and composites - Includes coverage of characterization and processing techniques, enabling research scientists and engineers to apply the information to their own research and development - Discusses potential applications and future prospects of algae-based biopolymers, giving the latest insight into the future of these sustainable materials

Download or read book Proceedings of 3rd Edition of International Conference and Exhibition on Polymer Chemistry 2018 written by EuroScicon and published by EuroScicon. This book was released on 2018-03-20 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: March 26-28, 2018 | Vienna, Austria Key Topics : Recent Developments In Polymer Synthesis, Polymer Design And Reactions, Polymer Physics And Characterizations, Stereochemistry Of Polymers, Biodegradable Polymers, Biopolymers & Biomaterials, Polymer Engineering, Polymers For Emerging Technologies, Polymerization Catalysis Or Polymer-Modified Catalysts, Applications Of BioPolymers, Bioplastics, Polymer Nanotechnology, Future Market Of Polymers, Polymer Science, Polymers For Stem Cell, Polymers In All-Solid-State Batteries,

Download or read book Conductivity and Thermoplastic Elastomer Properties of Polypropylene Materials written by Fatih Dogan and published by BoD – Books on Demand. This book was released on 2024-11-06 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles recent studies by researchers in polypropylene materials, offering information in a format that is easily accessible to a wide audience. It discusses the thermoplastic elastomer features of polypropylene, which play an important role in industrial processes, as well as its usability as an electrostatic discharge (ESD) material. The book also explores the potential of polypropylene materials for use in electroplated plates. In addition, it presents research on the electrical properties of polypropylene materials enhanced with various additives, examining the effects of these additives on the production of polypropylene-based composite materials. By addressing these topics, the book aims to serve as a guide for researchers and contribute to advancements in industrial applications.