Download or read book Polynomial Fuzzy Model Based Control Systems written by Hak-Keung Lam and published by Springer. This book was released on 2016-07-18 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent research on the stability analysis of polynomial-fuzzy-model-based control systems where the concept of partially/imperfectly matched premises and membership-function dependent analysis are considered. The membership-function-dependent analysis offers a new research direction for fuzzy-model-based control systems by taking into account the characteristic and information of the membership functions in the stability analysis. The book presents on a research level the most recent and advanced research results, promotes the research of polynomial-fuzzy-model-based control systems, and provides theoretical support and point a research direction to postgraduate students and fellow researchers. Each chapter provides numerical examples to verify the analysis results, demonstrate the effectiveness of the proposed polynomial fuzzy control schemes, and explain the design procedure. The book is comprehensively written enclosing detailed derivation steps and mathematical derivations also for readers without extensive knowledge on the topics including students with control background who are interested in polynomial fuzzy model-based control systems.

Download or read book Stability and Performance Analysis of Polynomial Fuzzy model based Control Systems and Interval Type 2 Fuzzy Logic Systems written by Bo Xiao and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main research objective in this thesis is to investigate the stability and performance of the interval type-2 (IT2) polynomial-fuzzy-model-based (PFMB) control system. PFMB control scheme has been developed recently around 2009 and demonstrates more potential than the traditional Takagi-Sugeno fuzzy-model-based (T-S FMB) control approach to represent the nonlinearities in the plant. Meanwhile, the IT2 fuzzy logic has also been proposed to incorporate uncertainties of the nonlinear systems into the membership functions directly. Through the IT2 PFMB control design approach, both the nonlinearity and the uncertainty in the system can be handled well. The control performance and the relaxation of stability conditions of IT2 PFMB control systems are studied and investigated in the thesis. The main contribution of the thesis is summarized in three tasks and presented as following: In the first task in Chapter 3, the stability conditions of the PFMB systems equipped with mismatched IT2 membership functions are investigated. Unlike the membership-function-independent (MFI) methods, the information and properties of IT2 membership functions are considered in the stability analysis and contained in the stability conditions in terms of sum-of-squares (SOS) based on the Lyapunov stability theory. Three methods, demonstrating their own merits, are proposed to conduct the stability analysis for the IT2 PFMB control systems and all of the methods can achieve feasible control results. All the three approaches are well explained, which offers the reader systematic ways to include the information of the membership functions into the analysis. In addition, all the approaches are compared and the pros and cons are presented to help the reader choose the most appropriate approach in the applications.

Download or read book Stability Analysis of Fuzzy Model Based Control Systems written by Hak-Keung Lam and published by Springer. This book was released on 2011-01-28 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the state-of-the-art fuzzy-model-based (FMB) based control approaches are covered. A comprehensive review about the stability analysis of type-1 and type-2 FMB control systems using the Lyapunov-based approach is given, presenting a clear picture to researchers who would like to work on this field. A wide variety of continuous-time nonlinear control systems such as state-feedback, switching, time-delay and sampled-data FMB control systems, are covered. In short, this book summarizes the recent contributions of the authors on the stability analysis of the FMB control systems. It discusses advanced stability analysis techniques for various FMB control systems, and founds a concrete theoretical basis to support the investigation of FMB control systems at the research level. The analysis results of this book offer various mathematical approaches to designing stable and well-performed FMB control systems. Furthermore, the results widen the applicability of the FMB control approach and help put the fuzzy controller in practice. A wide range of advanced analytical and mathematical analysis techniques will be employed to investigate the system stability and performance of FMB-based control systems in a rigorous manner. Detailed analysis and derivation steps are given to enhance the readability, enabling the readers who are unfamiliar with the FMB control systems to follow the materials easily. Simulation examples, with figures and plots of system responses, are given to demonstrate the effectiveness of the proposed FMB control approaches.

Download or read book Stability Analysis of Interval Type 2 Polynomial Fuzzy model based Control Systems written by Ge Song and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stability Analysis of Fuzzy Model Based Control Systems written by Hak-Keung Lam and published by Springer Science & Business Media. This book was released on 2011-01-27 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the state-of-the-art fuzzy-model-based (FMB) based control approaches are covered. A comprehensive review about the stability analysis of type-1 and type-2 FMB control systems using the Lyapunov-based approach is given, presenting a clear picture to researchers who would like to work on this field. A wide variety of continuous-time nonlinear control systems such as state-feedback, switching, time-delay and sampled-data FMB control systems, are covered. In short, this book summarizes the recent contributions of the authors on the stability analysis of the FMB control systems. It discusses advanced stability analysis techniques for various FMB control systems, and founds a concrete theoretical basis to support the investigation of FMB control systems at the research level. The analysis results of this book offer various mathematical approaches to designing stable and well-performed FMB control systems. Furthermore, the results widen the applicability of the FMB control approach and help put the fuzzy controller in practice. A wide range of advanced analytical and mathematical analysis techniques will be employed to investigate the system stability and performance of FMB-based control systems in a rigorous manner. Detailed analysis and derivation steps are given to enhance the readability, enabling the readers who are unfamiliar with the FMB control systems to follow the materials easily. Simulation examples, with figures and plots of system responses, are given to demonstrate the effectiveness of the proposed FMB control approaches.

Download or read book Fuzzy Control Systems Design and Analysis written by Kazuo Tanaka and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of model-based fuzzy control systems This volume offers full coverage of the systematic framework for the stability and design of nonlinear fuzzy control systems. Building on the Takagi-Sugeno fuzzy model, authors Tanaka and Wang address a number of important issues in fuzzy control systems, including stability analysis, systematic design procedures, incorporation of performance specifications, numerical implementations, and practical applications. Issues that have not been fully treated in existing texts, such as stability analysis, systematic design, and performance analysis, are crucial to the validity and applicability of fuzzy control methodology. Fuzzy Control Systems Design and Analysis addresses these issues in the framework of parallel distributed compensation, a controller structure devised in accordance with the fuzzy model. This balanced treatment features an overview of fuzzy control, modeling, and stability analysis, as well as a section on the use of linear matrix inequalities (LMI) as an approach to fuzzy design and control. It also covers advanced topics in model-based fuzzy control systems, including modeling and control of chaotic systems. Later sections offer practical examples in the form of detailed theoretical and experimental studies of fuzzy control in robotic systems and a discussion of future directions in the field. Fuzzy Control Systems Design and Analysis offers an advanced treatment of fuzzy control that makes a useful reference for researchers and a reliable text for advanced graduate students in the field.

Download or read book Stability Analysis of Fuzzy Model based Control Systems with Knowledge on Membership Functions Shapes written by Mohammad Narimani and published by . This book was released on 2011 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis using fuzzy logic methodology, the stability of complex nonlinear control systems is investigated. Fuzzy-Model-Based (FMB) control system offers a systematic platform in handling control problems from the point of view of stability analysis. In this platform, Membership Functions (MFs) gather the overall nonlinear properties of the control system. The lack of the information of MFs is one the main sources of conservativeness in the current stability analysis approaches. To widen the applicability of the FMB control scheme, the aim of the proposed research the¬sis is to derive less conservative stability conditions. Therefore, some attempts are made to obtain relaxed shape-dependent stability conditions. The results of this investigation are presented in three parts as follows: 1. The stability analysis of FMB control systems under Parallel Distributed Com¬ pensation (PDC) is carried out. First, the stability conditions, which are the inequal¬ ities in the form of p-dimensional fuzzy summation, are expanded to n-dimensional fuzzy summation (n > p). The global and regional boundary information of MFs are then utilized for relaxation of stability analysis results and two analysis approaches are proposed namely Global-Membership-Function-Shape-Dependent (GMFSD) ap¬ proach and Regional-Membership-Function-Shape-Dependent (RMFSD) approach, respectively. For RMFSD approach the operating region is partitioned into subre- glons and the boundary information of MFs on all operating subregions are employed to facilitate the stability analysis. The stability conditions are derived in the form of Linear Matrix Inequality (LMI). 2. Employing Sum of Squares (SOS) approach, relaxed stability conditions for Polynomial-Fuzzy-Model-Based (PFMB) control systems are derived. First, MFs are approximated by some polynomials in the partitioned operating domain of MFs.

Download or read book Intelligent Control Filtering and Model Reduction Analysis for Fuzzy Model Based Systems written by Xiaojie Su and published by Springer Nature. This book was released on 2021-08-17 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to introduce the state-of-the-art research of stability/performance analysis and optimal synthesis methods for fuzzy-model-based systems. A series of problems are solved with new approaches of design, analysis and synthesis of fuzzy systems, including stabilization control and stability analysis, dynamic output feedback control, fault detection filter design, and reduced-order model approximation. Some efficient techniques, such as Lyapunov stability theory, linear matrix inequality, reciprocally convex approach, and cone complementary linearization method, are utilized in the approaches. This book is a comprehensive reference for researchers and practitioners working on intelligent control, model reduction, and fault detection of fuzzy systems, and is also a useful source of information for senior undergraduates and graduates in these areas. The readers will benefit from some new concepts and methodologies with theoretical and practical significance in system analysis and control synthesis.

Download or read book Analysis and Synthesis of Fuzzy Control Systems written by Gang Feng and published by CRC Press. This book was released on 2018-09-03 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic control (FLC) has proven to be a popular control methodology for many complex systems in industry, and is often used with great success as an alternative to conventional control techniques. However, because it is fundamentally model free, conventional FLC suffers from a lack of tools for systematic stability analysis and controller design. To address this problem, many model-based fuzzy control approaches have been developed, with the fuzzy dynamic model or the Takagi and Sugeno (T–S) fuzzy model-based approaches receiving the greatest attention. Analysis and Synthesis of Fuzzy Control Systems: A Model-Based Approach offers a unique reference devoted to the systematic analysis and synthesis of model-based fuzzy control systems. After giving a brief review of the varieties of FLC, including the T–S fuzzy model-based control, it fully explains the fundamental concepts of fuzzy sets, fuzzy logic, and fuzzy systems. This enables the book to be self-contained and provides a basis for later chapters, which cover: T–S fuzzy modeling and identification via nonlinear models or data Stability analysis of T–S fuzzy systems Stabilization controller synthesis as well as robust H∞ and observer and output feedback controller synthesis Robust controller synthesis of uncertain T–S fuzzy systems Time-delay T–S fuzzy systems Fuzzy model predictive control Robust fuzzy filtering Adaptive control of T–S fuzzy systems A reference for scientists and engineers in systems and control, the book also serves the needs of graduate students exploring fuzzy logic control. It readily demonstrates that conventional control technology and fuzzy logic control can be elegantly combined and further developed so that disadvantages of conventional FLC can be avoided and the horizon of conventional control technology greatly extended. Many chapters feature application simulation examples and practical numerical examples based on MATLAB®.

Download or read book Fuzzy Model Identification for Control written by Janos Abonyi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new approaches to constructing fuzzy models for model-based control. Simulated examples and real-world applications from chemical and process engineering illustrate the main methods and techniques. Supporting MATLAB and Simulink files create a computational platform for exploration of the concepts and algorithms.

Download or read book Fuzzy Modeling and Fuzzy Control written by Huaguang Zhang and published by Springer Science & Business Media. This book was released on 2007-10-17 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic methodology has proven effective in dealing with complex nonlinear systems containing uncertainties that are otherwise difficult to model. Technology based on this methodology is applicable to many real-world problems, especially in the area of consumer products. This book presents the first comprehensive, unified treatment of fuzzy modeling and fuzzy control, providing tools for the control of complex nonlinear systems. Coverage includes model complexity, model precision, and computing time. This is an excellent reference for electrical, computer, chemical, industrial, civil, manufacturing, mechanical and aeronautical engineers, and also useful for graduate courses in electrical engineering, computer engineering, and computer science.

Download or read book Fuzzy Control Systems with Time Delay and Stochastic Perturbation written by Ligang Wu and published by Springer. This book was released on 2014-10-17 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents up-to-date research developments and novel methodologies on fuzzy control systems. It presents solutions to a series of problems with new approaches for the analysis and synthesis of fuzzy time-delay systems and fuzzy stochastic systems, including stability analysis and stabilization, dynamic output feedback control, robust filter design, and model approximation. A set of newly developed techniques such as fuzzy Lyapunov function approach, delay-partitioning, reciprocally convex, cone complementary linearization approach are presented. Fuzzy Control Systems with Time-Delay and Stochastic Perturbation: Analysis and Synthesis is a comprehensive reference for researcher and practitioners working in control engineering, system sciences and applied mathematics, and is also a useful source of information for senior undergraduates and graduates in these areas. The readers will benefit from some new concepts, new models and new methodologies with practical significance in control engineering and signal processing.

Download or read book Virtual Equivalent System Approach for Stability Analysis of Model based Control Systems written by Weicun Zhang and published by Springer Nature. This book was released on 2020-06-05 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book puts forward the concept of a virtual equivalent system (VES) based on theoretical analysis and simulation results. The new concept will facilitate the development of a unified framework for analyzing the stability and convergence of self-tuning control (STC) systems, and potentially, of all adaptive control systems. The book then shows that a time-varying STC system can be converted into a time-invariant system using a certain nonlinear compensation signal, which reduces the complexity and difficulty of stability and convergence analysis. In closing, the VES concept and methodology are used to assess the stability of multiple model adaptive control (MMAC) systems and T-S model-based fuzzy control systems.

Download or read book Fuzzy Modeling for Control written by Robert Babuška and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rule-based fuzzy modeling has been recognised as a powerful technique for the modeling of partly-known nonlinear systems. Fuzzy models can effectively integrate information from different sources, such as physical laws, empirical models, measurements and heuristics. Application areas of fuzzy models include prediction, decision support, system analysis, control design, etc. Fuzzy Modeling for Control addresses fuzzy modeling from the systems and control engineering points of view. It focuses on the selection of appropriate model structures, on the acquisition of dynamic fuzzy models from process measurements (fuzzy identification), and on the design of nonlinear controllers based on fuzzy models. To automatically generate fuzzy models from measurements, a comprehensive methodology is developed which employs fuzzy clustering techniques to partition the available data into subsets characterized by locally linear behaviour. The relationships between the presented identification method and linear regression are exploited, allowing for the combination of fuzzy logic techniques with standard system identification tools. Attention is paid to the trade-off between the accuracy and transparency of the obtained fuzzy models. Control design based on a fuzzy model of a nonlinear dynamic process is addressed, using the concepts of model-based predictive control and internal model control with an inverted fuzzy model. To this end, methods to exactly invert specific types of fuzzy models are presented. In the context of predictive control, branch-and-bound optimization is applied. The main features of the presented techniques are illustrated by means of simple examples. In addition, three real-world applications are described. Finally, software tools for building fuzzy models from measurements are available from the author.

Download or read book Proceedings of 2021 5th Chinese Conference on Swarm Intelligence and Cooperative Control written by Zhang Ren and published by Springer Nature. This book was released on 2022-07-29 with total page 1902 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 2021 5th Chinese Conference on Swarm Intelligence and Cooperative Control (CCSICC2021), held in Shenzhen, China on January 19-22, 2022. The topics covered include but are not limited to: reviews and discussions of swarm intelligence, basic theories on swarm intelligence, swarm communication and networking, swarm perception, awareness and location, swarm decision and planning, cooperative control, cooperative guidance, swarm simulation and assessment. The papers showcased here share the latest findings on theories, algorithms and applications in swarm intelligence and cooperative control, making the book a valuable asset for researchers, engineers, and university students alike.

Download or read book Relaxed Stability Analysis for Fuzzy model based Observer control Systems written by Chuang Liu and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3) The polynomial fuzzy observer-controller with unmeasurable premise variables is designed for systems with unmeasurable states. Although the consideration of the polynomial fuzzy model and unmeasurable premise variables enhances the applicability of the FMB control strategy, it leads to non-convex stability conditions. Therefore, two methods are applied to derive convex stability conditions: refined completing square approach and matrix decoupling technique. Additionally, the designed polynomial fuzzy observer-controller is extended for systems where only sampled-output measurements are available. Furthermore, the membership functions of the designed polynomial observer-controller are optimized by the improved gradient descent method. Simulation examples are provided to demonstrate and verify the theoretical analysis.

Download or read book Fuzzy Logic Identification and Predictive Control written by Jairo Jose Espinosa Oviedo and published by Springer Science & Business Media. This book was released on 2007-01-04 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern industrial processes and systems require adaptable advanced control protocols able to deal with circumstances demanding "judgement” rather than simple "yes/no”, "on/off” responses: circumstances where a linguistic description is often more relevant than a cut-and-dried numerical one. The ability of fuzzy systems to handle numeric and linguistic information within a single framework renders them efficacious for this purpose. Fuzzy Logic, Identification and Predictive Control first shows you how to construct static and dynamic fuzzy models using the numerical data from a variety of real industrial systems and simulations. The second part exploits such models to design control systems employing techniques like data mining. This monograph presents a combination of fuzzy control theory and industrial serviceability that will make a telling contribution to your research whether in the academic or industrial sphere and also serves as a fine roundup of the fuzzy control area for the graduate student.