Download or read book Polymers in Agriculture and Horticulture written by Roger P. Brown and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers have been used in agriculture and horticulture since the middle of the last century. There is a tremendous potential for using polymers in agriculture and our fields and garden would look very different if we did not use polymers in them. This review traces the history of polymer use, discusses the markets for polymers in these applications, and describes in detail the different types of polymers that can be used and their specific applications. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Download or read book Polymers for Agri Food Applications written by Tomy J. Gutiérrez and published by Springer. This book was released on 2019-08-02 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an exhaustive analysis of the trends in the development and use of natural and synthetic polymer systems aimed at sustainable agricultural production. The polymers have allowed the development of controlled and released systems of agrochemicals such as pesticides, fertilizers and phytohormones through micro and nanoencapsulated systems, which protect and stimulate the growth of crops at low costs and without damage to the environment. Hydrogel systems from natural and synthetic polymers have also had their place in the agricultural industry, since they allow to maintain the humidity conditions of the crops for their correct development in drought times. Mulch films made of polymers have also become important in the control of weeds and pests in crops, as well as the use of edible coatings applied to fruits and vegetables during post-harvest, which reduce the losses of these perishable foods. Currently, the systems indicated, as well as others, are already used on a large scale. However, research studies in this area have been limited compared to other polymer applications. This book collects useful information for researchers, students and technologies related to the polymer technology and agri-food production. In this book, world-renowned researchers have participated, including associate editors of important journals, as well as researchers working in the area of research and development (R&D) of leading agri-food industries in the manufacture of agricultural inputs.
Download or read book Agricultural and Horticultural Applications of Polymers written by Garnaud and published by Pergamon. This book was released on 1989-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymers for Agri food Applications written by Tomy J. Gutiérrez and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an exhaustive analysis of the trends in the development and use of natural and synthetic polymer systems aimed at sustainable agricultural production. The polymers have allowed the development of controlled and released systems of agrochemicals such as pesticides, fertilizers and phytohormones through micro and nanoencapsulated systems, which protect and stimulate the growth of crops at low costs and without damage to the environment. Hydrogel systems from natural and synthetic polymers have also had their place in the agricultural industry, since they allow to maintain the humidity conditions of the crops for their correct development in drought times. Mulch films made of polymers have also become important in the control of weeds and pests in crops, as well as the use of edible coatings applied to fruits and vegetables during post-harvest, which reduce the losses of these perishable foods. Currently, the systems indicated, as well as others, are already used on a large scale. However, research studies in this area have been limited compared to other polymer applications. This book collects useful information for researchers, students and technologies related to the polymer technology and agri-food production. In this book, world-renowned researchers have participated, including associate editors of important journals, as well as researchers working in the area of research and development (R & D) of leading agri-food industries in the manufacture of agricultural inputs.
Download or read book A Guide to the Manufacture Performance and Potential of Plastics in Agriculture written by Michael Orzolek and published by Elsevier. This book was released on 2017-03-16 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastics in agriculture – to increase crop output, improve food quality and improve sustainability – has grown substantially in both quantity and the range of applications. Many of the early researchers that conducted field research in the use of plastics in agriculture have either retired or are deceased. These early pioneers in plasticulture research, the basis of plant production using plastics, were very creative and persistent in discovering uses of plastics in agricultural applications. A Guide to the Manufacture, Performance, and Potential of Plastics in Agriculture contains both references not only to their accomplishments but also their publications. The book discusses plasticulture-the basis of plant production using plastics – including topics such as plastic mulch, row covers, drip irrigation, and high/low tunnels. It covers the process of producing polyethylene and polypropylene plastics that are used in plant and animal production agriculture, and the many uses of plastics in all aspects of agriculture, including plastic greenhouses, rigid mold plastics, disposal of plastics, and plastics in animal production. This book introduces a range of academics and industrial practitioners to the impact of plastics in agriculture, both historically and in a range of current applications. It also provides new perspectives on future developments to enable further research and application. It is an invaluable reference on the use of polyethylene, polypropylene films, and such products in all aspects of agricultural production. Discusses plasticulture, the basis of plant production using plastics, including topics such as plastic mulch, row covers, drip irrigation, and high/low tunnels Contains 10 chapters that cover the process of producing polyethylene and polypropylene plastics that are used in agriculture Covers the many uses of plastics in all aspects of agriculture, including plastic greenhouses, rigid mold plastics, disposal of plastics, and plastics in animal production
Download or read book Plastics Mulching Thermoplastic Films for Use in Agriculture and Horticulture written by British Standards Institute Staff and published by . This book was released on 2002-10-31 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics, Plastic films, Thermoplastic polymers, Mulching, Agriculture, Agricultural equipment, Horticulture, Horticultural equipment, Polyethylene, Optical properties of materials, Mechanical properties of materials
Download or read book Biopolymeric Nanoparticles for Agricultural Applications written by Kamel A. Abd-Elsalam and published by Springer. This book was released on 2024-11-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers are polymers that are naturally sourced from renewable resources such as plants, animals, and microorganisms. These polymers are gaining increasing attention due to their biodegradability, biocompatibility, and non-toxicity, making them an attractive alternative to traditional synthetic polymers. "Biopolymeric Nanoparticles for Agricultural Applications" focuses on the use of biopolymeric nanoparticles for various agricultural purposes. It explores the potential of these nanoparticles in improving crop productivity, enhancing soil quality, and reducing the environmental impact of agricultural practices. Biopolymeric nanoparticles have gained significant attention in recent years as a promising technology for various agricultural applications such as crop protection, nutrient delivery, and soil remediation. These nanoparticles are typically made from biodegradable and biocompatible materials, such as chitosan, alginate, and starch, and offer several advantages over conventional agricultural formulations including improved stability, controlled release, and enhanced efficacy. This book provides a comprehensive overview of recent advances in the design, synthesis, characterization, and application of biopolymeric nanoparticles in agriculture. It discusses the various biopolymeric nanoparticles that can be utilized in agriculture such as chitosan, cellulose, starch, and protein-based nanoparticles. It delves into their properties, synthesis methods, and characterization techniques. The primary purpose of this book is to provide a comprehensive understanding of the applications of biopolymeric nanoparticles in agriculture. It bridges the gap between the fields of nanotechnology and agriculture, offering insights into the potential benefits and challenges associated with their use.
Download or read book Applications of Polymers written by Raymond Seymour and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural polymers, such as proteins, starch, cellulose, hevea rubber, and gum which have been available for centuries, have been applied as materials for food, leather, sizings, fibers, structures, waterproofing, and coatings. During the past century, the use of both natural and syn thetic polymers has been expanded to include more intricate applications, such as membranes, foams, medicinals, conductors, insulators, fibers, films, packaging and applications requiring high modulus at elevated temperatures. The topics in this symposium which are summarized in this book are illustrative of some of the myriad applications of these ubiquitous mater ials. As stated in forecast in the last chapter in this book, it is cer tain that revolutionary applications of polymers will occur during the next decades. Hopefully, information presented in other chapters in this book will catalyze some of these anticipated applications. It is appropriate that these reports were presented at an American Chemical Society Polymer Science and Engineering Division Award Symposium honoring Dr. O.A. Battista who has gratifying to note that Phillips Pet roleum Company, which has paved the way in applications of many new poly mers, is the sponsor of this important award. We are all cheerfully expressing our thanks to this corporate spon sor and to Distinguished Professor Raymond B. Seymour of the University of Southern Mississippi who served as the organizer of this symposium and editor of this important book.
Download or read book Plastics Thermoplastic Covering Films for Use in Agriculture and Horticulture written by British Standards Institute Staff and published by . This book was released on 1917-01-31 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: Glasshouses, Plastic films, Agricultural equipment, Thermoplastic polymers, Horticultural equipment, Polyethylene, Vegetables, Ethylene, Plastics, Covers, Flowers, Fruits
Download or read book Covering Thermoplastic Films for Use in Agriculture and Horticulture written by British Standards Institute Staff and published by . This book was released on 2001-05-15 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoplastic polymers, Covers, Plastics, Agricultural equipment, Horticultural equipment, Polyethylene, Plastic films, Ethylene, Glasshouses, Vegetables, Fruits, Flowers
Download or read book Plasticulture Engineering and Technology written by Rohitashw Kumar and published by CRC Press. This book was released on 2022-05-05 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of successful plasticulture engineering technology can ideally optimize crop yields and provide both economic and environmental benefits, such as reducing the need for water and fertilizer. This book discusses the myriad important aspects of crop production that utilize plastic, such as micro-irrigation, water management, plastic mulch films, protected cultivation and low tunnels, crop covers, canal linings, silage bags, and more. It also examines the latest methods for vertical farming and technological aspects, such as smart agriculture using the internet of things (IoT).The current state of the art, as well as potential future uses,ofplastics isdiscussed in addition to the benefits and limitations of plastics applications in agriculture generally. Features Illustrates application of plastic in protected cultivation, water management, aquaculture, and hi-tech horticulture using innovative technologies to enhance water use efficiency and crop productivity Presents precision farming for climate-resilient technologies Includes real-world examples to present practical insights of plastic engineering for climate change mitigation strategies. Plasticulture Engineering and Technology will serve as a useful resource for students, professionals, and researchers in agriculture and agricultural engineering, hydrology, hydraulics, water resources engineering, irrigation engineering, and environmental science.
Download or read book Functionalized Polymeric Materials in Agriculture and the Food Industry written by Ahmed Akelah and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book will be to demonstrate 1) the newly developed method of using reactive functionalized materials in agriculture to solve the economic and public health problems associated with using conventional agrochemicals; and 2) new technology aimed at achieving the greening of chemistry to meet appropriate environmental standards in both agriculture and industrial foodstuffs production. More specifically, the book will accomplish this goal by addressing 3 key issues in the field: 1) the production of reactive functionalized materials with enhanced properties that offer a major opportunity to overcome the disadvantages of using traditional materials; 2) the applications of functionalized materials in agriculture for the purpose of solving the economic and the environmental pollution problems associated with the uses of conventional agrochemicals; and 3) the contribution of polymers in solving problems associated with conventional procedures of food growth and processing, including those used in the dairy industry, sugar and fruit juices, beer and wine production, nutritive and nonnutritive food additives, and in food protection.
Download or read book Soil Degradable Bioplastics for a Sustainable Modern Agriculture written by Mario Malinconico and published by Springer. This book was released on 2017-02-14 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how the use of biodegradable plastics in agriculture can have a profound positive impact on plasticulture. Starting with an organic chemistry approach to biodegradable and compostable plastics, both natural and synthetic, it then analyzes the technological and agronomic aspects of existing bioplastics for protected cultivation (mulching, direct cover, low tunnels). It describes the new sprayable biodegradable mulching method, which is based on the use of waterborne polysaccharides and cellulosic fibers. A further chapter describes the research and technology of biodegradable plastics for different agricultural practices. It also includes chapters on life cycle assessment (LCA) of biodegradable plastics for agriculture, and existing and developing standards in the field. It is a valuable resource for agronomists, chemical and materials engineers, polymer technologists and scientists, as well as for a more general readership interested in the application of green chemistry principles to the vast world of crop production. Mario Malinconico is Research Director at the Institute of Polymers, Composites and Biomaterials, National Research Council, Italy. /p
Download or read book Biodegradable Polymers and Plastics written by Emo Chiellini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic and semi-synthetic polymeric materials were originally developed for their durability and resistance to all forms of degradation including biodegradation. Such materials are currently widely accepted because of their ease of processability and amenability to provide a large variety of cost effective items that help to enhance the comfort and quality of life in the modern industrial society. However, this widespread utilization of plastics has contributed to a serious plastic waste burden, and the expectation for the 21st century is for an increased demand for polymeric material. This volume focuses on a more rational utilization of resources in the fabrication, consumption and disposal of plastic items, specifically: -Environmentally Degradable Polymeric Materials (EDPs); -Water-soluble/Swellable Biodegradable Polymers; -EDPs from Renewable Resources; -Biopolymers; -Bioresorbable Materials for Biomedical Applications; -Biorelated Polymers; -Standards and Regulations on EDPs.
Download or read book Biodegradable Materials and Natural Fibre Composities in Agriculture and Horticulture written by Hans-Joachim Labowsky and published by . This book was released on 2003 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Biodegradable Mulch Films for Use in Agriculture and Horticulture Requirements and Test Methods written by British Standards Institute Staff and published by . This book was released on 1918-02-22 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Horticulture, Thermoplastic polymers, Plastic films, Optical properties of materials, Mechanical properties of materials, Plastics, Mulching, Agricultural equipment, Horticultural equipment, Polyethylene, Agriculture
Download or read book Polymer Polymer Miscibility written by Olagoke Olabis and published by Elsevier. This book was released on 2012-12-02 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer–Polymer Miscibility discusses miscibility of polymeric mixtures. This book explains the theoretical and practical aspects of polymer miscibility, which has become a considerable area of research in many academic and industrial laboratories. Comprised of seven chapters, this book starts with an overview of the physical nature of the variations of the basic polymer structure. This monograph then discusses the two cases of miscible polymer blends, namely, poly(vinyl chloride) (PVC)–butadiene/acrylonitrile copolymer (NBR) and polystyrene–poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) blends. This text explores the useful and unique properties of blends of poly(vinyl chloride) and butadiene/acrylonitrile copolymer rubber. Other chapters discuss the thermodynamic theories for the phase separation of block copolymers. The reader is also introduced to other variations of chemical structure, which can result in the permanent attachment of polymers to each other through block and graft copolymers. This text also explores the feasibility of covalent bonding of polymer components. This book is intended for chemical engineers and materials scientists.