Download or read book Polymeric and Natural Composites written by Md Saquib Hasnain and published by Springer Nature. This book was released on 2021-07-14 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides understanding of raw materials, manufacturing and biomedical applications of different polymeric and natural composites such as drug delivery, growth factor delivery, orthopedics, dentistry and wound dressing.
Download or read book Natural Fiber Reinforced Biodegradable and Bioresorbable Polymer Composites written by Alan Kin-tak Lau and published by Woodhead Publishing. This book was released on 2017-02-28 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Fiber-Reinforced Biodegradable and Bioresorbable Polymer Composites focuses on key areas of fundamental research and applications of biocomposites. Several key elements that affect the usage of these composites in real-life applications are discussed. There will be a comprehensive review on the different kinds of biocomposites at the beginning of the book, then the different types of natural fibers, bio-polymers, and green nanoparticle biocomposites are discussed as well as their potential for future development and use in engineering biomedical and domestic products. Recently mankind has realized that unless the environment is protected, he himself will be threatened by the over consumption of natural resources as well as a substantial reduction in the amount of fresh air produced in the world. Conservation of forests and the optimal utilization of agricultural and other renewable resources like solar, wind, and tidal energy, have become important topics worldwide. With such concern, the use of renewable resources—such as plant and animal-based, fiber-reinforced polymeric composites—are now becoming an important design criterion for designing and manufacturing components for a broad range of different industrial products. Research on biodegradable polymeric composites can contribute, to some extent, to a much greener and safer environment. For example, in the biomedical and bioengineering fields, the use of natural fiber mixed with biodegradable and bioresorbable polymers can produce joint and bone fixtures to alleviate pain in patients. - Includes comprehensive information about the sources, properties, and biodegradability of natural fibers - Discusses failure mechanisms and modeling of natural fibers composites - Analyzes the effectiveness of using natural materials for enhancing mechanical, thermal, and biodegradable properties
Download or read book Manufacturing of Natural Fibre Reinforced Polymer Composites written by Mohd Sapuan Salit and published by Springer. This book was released on 2015-09-10 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fibre composite is an emerging material that has great potential to be used in engineering application. Oil palm, sugar palm, bagasse, coir, banana stem, hemp, jute, sisal, kenaf, roselle, rice husk, betul nut husk and cocoa pod are among the natural fibres reported to be used as reinforcing materials in polymer composites. Natural fibre composites were used in many industries such as automotive, building, furniture, marine and aerospace industries. The advantages of natural fibre composites include low cost, renewable, abundance, light weight, less abrasive and they are suitable to be used in semi or non-structural engineering components. Research on various aspects of natural fibre composites such as characterization, determination of properties and design have been extensively carried out. However, publications that reported on research of manufacture of natural fibre composites are very limited. Specifically, although manufacturing methods of components from natural fibre composites are similar to those of components from conventional fibre composites such as glass, carbon and Kevlar fibres, modification of equipment used for conventional fibre composites may be required. This book fills the gap of knowledge in the field of natural fibre composites for the research community. Among the methods reported that are being used to produce components from natural fibre composites include hand lay-up, compression moulding, filament winding, injection moulding, resin transfer moulding, pultrusion and vacuum bag moulding. This book is also intended to address some research on secondary processing such as machining and laser welding of natural fibre composites. It is hoped that publication of this book will provide the readers new knowledge and understanding on the manufacture of natural fibre composites.
Download or read book Tribology of Natural Fiber Polymer Composites written by and published by Elsevier. This book was released on 2008-10-14 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental concerns are driving demand for bio-degradable materials such as plant-based natural fiber reinforced polymer composites. These composites are fast replacing conventional materials in many applications, especially in automobiles, where tribology (friction, lubrication and wear) is important. This book covers the availability and processing of natural fiber polymer composites and their structural, thermal, mechanical and, in particular, tribological properties. Chapter 1 discusses sources of natural fibers, their extraction and surface modification. It also reviews the thermal, structural, mechanical, spectroscopic and morphological properties of unmodified and chemically modified natural fibers such as sisal, jute, wood, bamboo and cotton together with their potential applications. Chapter 2 gives a brief introduction to the tribology of polymer composites and the role of fiber reinforcement and fillers in modifying their tribological properties. Further chapters discuss the chemical composition, physical structure, mechanical properties and tribological behaviour of polymer composites reinforced with sisal, jute, cotton and bamboo fibers. The tribological behaviour of wood polymer composites (WPCs) is also discussed. Tribology of natural fibre polymer composites is a useful reference guide for engineers, scientific and technical personnel involved in the development of natural fiber composites. In particular it will give an insight into mechanical properties and failure mechanisms in situations where wear, lubrication and friction are a problem. Examines the availability and processing of natural fiber composites and their structural, thermal, mechanical and tribological properties Explores sources of natural fibers, their extraction and surface modification as well as properties of chemically modified natural fibers Provides an overview of the tribology of polymer composites and the role of fiber reinforcement and filters in modifying tribological composites
Download or read book Natural Fiber Reinforced Vinyl Ester and Vinyl Polymer Composites written by S. M. Sapuan and published by Woodhead Publishing. This book was released on 2018-06-15 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Fiber Reinforced Vinyl Ester and Vinyl Polymer Composites: Characterization, Properties and Applications discusses recent advances on the development, characterization and application of natural fiber vinyl ester and vinyl polymers composites. Various types of vinyl ester and vinyl based polymers, such as poly(vinyl chloride) (PVC), low and high density polyethylene (LDPE and HDPE), polypropylene (PP), polyvinyl alcohol (PVA) and polyvinyl acetate (PVAc) are discussed. Chapters focus on different composite fabrication processes, such as compression moulding, hand lay-up, and pultrusion processes. Key themes covered include the properties and characterization of vinyl ester and vinyl polymers composites reinforced by natural fibers. The effect of fiber treatment and coupling agents on mechanical and physical properties of these materials is also evaluated. In addition to a determination of physical and mechanical properties, studies on thermal, degradation, swelling behavior, and the morphological properties of natural fiber reinforced vinyl ester and vinyl polymer composites is also presented. - Presents the importance of vinyl ester and vinyl-based polymers as matrices in natural fiber composites - Provides a detailed and comprehensive review on the development, characterization and applications of natural fiber vinyl ester and vinyl polymers composites - Looks at recent fabrication techniques and the mechanical properties of materials - Contains contributions from leading experts in the field
Download or read book Natural and Synthetic Fiber Reinforced Composites written by Sanjay Mavinkere Rangappa and published by John Wiley & Sons. This book was released on 2022-04-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and Synthetic Fiber Reinforced Composites Discover a comprehensive exploration of fiber reinforced polymers by an expert team of editors Fiber reinforced polymer (FRP) composites offer several unique properties that make them ideal for use in a wide range of industries, from automotive and aerospace to marine, construction, and co-industrial. In Natural and Synthetic Fiber Reinforced Composites: Synthesis, Properties and Applications, a distinguished team of mechanical engineers delivers a comprehensive overview of fiber reinforced composites. This edited volume includes thorough discussions of glass-, cotton-, and carbon-fiber reinforced materials, as well as the tribological properties and non-structural applications of synthetic fiber composites. Readers will also find practical explorations of the structural evolution, mechanical features, and future possibilities of fiber, textile, and nano-cementitious materials. The physical and chemical properties of cotton fiber-based composites are explored at length, as are the extraordinary mechanical, thermal, electrical, electronic, and field emission properties of carbon nanotubes. This singular book also includes: A thorough discussion of recent advancements in natural fiber reinforced polymer composites, their implications, and the opportunities that arise as a result A comprehensive exploration of the thermal behavior of natural fiber-based composites An insightful review of the literature on sisal fiber with polymer matrices A response to the growing research gap in the existing literature regarding natural fiber-based polymer composites and solutions to address it Perfect for scientists, engineers, professors, and students working in areas involving natural and synthetic reinforced polymers and composites, Natural and Synthetic Fiber Reinforced Composites: Synthesis, Properties and Applications offers a one-of-a-kind resource to help readers understand a critical and rapidly evolving technology.
Download or read book Natural Fibre Composites written by Alma THULE and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of natural fibres as reinforcements in composites has grown in importance in recent years. Natural Fibre Composites summarises the wealth of significant recent research in this area. Chapters in part one introduce and explore the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres. Part two describes and illustrates the processing of natural fibre composites. Chapters discuss ethical practices in the processing of green composites, manufacturing methods and compression and injection molding techniques for natural fibre composites, and thermoset matrix natural fibre-reinforced composites. Part three highlights and interprets the testing and properties of natural fibre composites including, non-destructive and high strain rate testing. The performance of natural fibre composites is examined under dynamic loading, the response of natural fibre composites to impact damage is appraised, and the response of natural fibre composites in a marine environment is assessed. Natural Fibre Composites is a technical guide for professionals requiring an understanding of natural fibre composite materials. It offers reviews, applications and evaluations of the subject for researchers and engineers. - Introduces and explores the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres - Highlights and interprets the testing and properties of natural fibre composites, including non-destructive and high strain rate testing - Examines performance of natural fibre composites under dynamic loading, the response of natural fibre composites to impact damage, and the response of natural fibre composites in a marine environment
Download or read book Natural Fibers Plastics and Composites written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cellulose Fibers Bio and Nano Polymer Composites written by Susheel Kalia and published by Springer Science & Business Media. This book was released on 2011-04-11 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because we are living in an era of Green Science and Technology, developments in the field of bio- and nano- polymer composite materials for advanced structural and medical applications is a rapidly emerging area and the subject of scientific attention. In light of the continuously deteriorating environmental conditions, researchers all over the world have focused an enormous amount of scientific research towards bio-based materials because of their cost effectiveness, eco-friendliness and renewability. This handbook deals with cellulose fibers and nano-fibers and covers the latest advances in bio- and nano- polymer composite materials. This rapidly expanding field is generating many exciting new materials with novel properties and promises to yield advanced applications in diverse fields. This book reviews vital issues and topics and will be of interest to academicians, research scholars, polymer engineers and researchers in industries working in the subject area. It will also be a valuable resource for undergraduate and postgraduate students at institutes of plastic engineering and other technical institutes.
Download or read book Polymer Based Composites written by V. Arumugaprabu and published by CRC Press. This book was released on 2021-08-23 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing use of composite materials over conventional materials has been a continual trend for over a decade. While the fundamental understanding of fiber reinforcement has not changed, many new material advancements have occurred, especially in manufacturing methods, and there is an ever-growing number of composite material applications across various industries. Polymer-Based Composites: Design, Manufacturing, and Applications presents the concepts and methods involved in the development of various fiber-reinforced composite materials. Features: Offers a comprehensive view of materials, mechanics, processing, design, and applications Bridges the gap between research, manufacturing science, and analysis and design Discusses composite materials composed of continuous synthetic fibers and matrices for use in engineering structures Presents codes and standards related to fiber-reinforced polymer composites Includes case studies and examples based on industrial, automotive, aerospace, and household applications This book is a valuable resource for advanced students, researchers, and industry personnel to understand recent advances in the field and achieve practical results in the development, manufacture, and application of advanced composite materials.
Download or read book Joining Processes for Dissimilar and Advanced Materials written by Pawan Kumar Rakesh and published by Woodhead Publishing. This book was released on 2021-11-13 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joining Processes for Dissimilar and Advanced Materials describes how to overcome the many challenges involved in the joining of similar and dissimilar materials resulting from factors including different thermal coefficients and melting points. Traditional joining processes are ineffective with many newly developed materials. The ever-increasing industrial demands for production efficiency and high-performance materials are also pushing this technology forward. The resulting emergence of advanced micro- and nanoscale material joining technologies, have provided many solutions to these challenges. Drawing on the latest research, this book describes primary and secondary processes for the joining of advanced materials such as metals and alloys, intermetallics, ceramics, glasses, polymers, superalloys, electronic materials and composites in similar and dissimilar combinations. It also covers details of joint design, quality assurance, economics and service life of the product. - Provides valuable information on innovative joining technologies including induction heating of metals, ultrasonic heating, and laser heating at micro- and nanoscale levels - Describes the newly developed modelling, simulation and digitalization of the joining process - Includes a methodology for characterization of joints
Download or read book Natural Polymers written by Maya J. John and published by Royal Society of Chemistry. This book was released on 2012 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In the search for sustainable materials, natural polymers present an attractive alternative for many applications compared to their synthetic counterparts derived from petrochemicals. The two volume set, Natural Polymers, covers the synthesis, characterisation and applications of key natural polymeric systems including their morphology, structure, dynamics and properties. Volume one focuses on natural polymer composites, including both natural and protein fibres, and volume two on natural polymer nanocomposites. The first volume examines the characterization, life cycle assessment and new sources of natural fibres and their potential as a replacement for synthetic fibres in industrial applications. It then explores the important advancements in the field of wool, silk, spidersilk and mussel byssus fibres. The second volume looks at the properties and characterization of cellulose, chitosan, furanic, starch, wool and silk nanocomposites and the potential industrial applications of natural polymer nanocomposites"-- Provided by publisher.
Download or read book Hybrid Natural Fiber Composites written by Anish Khan and published by Woodhead Publishing. This book was released on 2021-01-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on natural fiber composites is an emerging area in the field of polymer science with tremendous growth potential for commercialization. Hybrid Natural Fiber Composites: Material Formulations, Processing, Characterization, Properties, and Engineering Applications provides updated information on all the important classes of natural fibers and their composites that can be used for a broad range of engineering applications. Leading researchers from industry, academia, government, and private research institutions from across the globe have contributed to this highly application-oriented book. The chapters showcase cutting-edge research discussing the current status, key trends, future directions, and opportunities. Focusing on the current state of the art, the authors aim to demonstrate the future potential of these materials in a broad range of demanding engineering applications. This book will act as a one-stop reference resource for academic and industrial researchers working in R&D departments involved in designing composite materials for semi structural engineering applications. - Presents comprehensive information on the properties of hybrid natural fiber composites that demonstrate their ability to improve the hydrophobic nature of natural fiber composites - Reviews recent developments in the research and development of hybrid natural fiber composites in various engineering applications - Focuses on modern technologies and illustrates how hybrid natural fiber composites can be used as alternatives in structural components subjected to severe conditions
Download or read book Sustainable Polymer Composites and Nanocomposites written by Inamuddin and published by Springer. This book was released on 2019-02-01 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents emerging economical and environmentally friendly polymer composites that are free of the side effects observed in traditional composites. It focuses on eco-friendly composite materials using granulated cork, a by-product of the cork industry; cellulose pulp from the recycling of paper residues; hemp fibers; and a range of other environmentally friendly materials procured from various sources. The book presents the manufacturing methods, properties and characterization techniques of these eco-friendly composites. The respective chapters address classical and recent aspects of eco-friendly polymer composites and their chemistry, along with practical applications in the biomedical, pharmaceutical, automotive and other sectors. Topics addressed include the fundamentals, processing, properties, practicality, drawbacks and advantages of eco-friendly polymer composites. Featuring contributions by experts in the field with a variety of backgrounds and specialties, the book will appeal to researchers and students in the fields of materials science and environmental science. Moreover, it fills the gap between research work in the laboratory and practical applications in related industries.
Download or read book Natural Fiber Textile Composite Engineering written by Magdi El Messiry and published by CRC Press. This book was released on 2017-07-06 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Fiber Textile Composite Engineering sheds light on the area of the natural fiber textile composites with new research on their applications, the material used, the methods of preparation, the different types of polymers, the selection of raw materials, the elements of design the natural fiber textile polymer composites for a particular end use, their manufacturing techniques, and finally their life cycle assessments (LCA). The volume also addresses the important issue in the materials science of how to utilize natural fibers as an enhancement to composite materials. Natural fiber-reinforced polymer composites have been proven to provide a combination of superior mechanical property, dielectric property, and environmental advantages such as renewability and biodegradability. Natural fibers, some from agricultural waste products, can replace existing metallic and plastic parts and help to alleviate the environmental problem of increasing amounts of agriculture residual. The book is divided into four sections, covering: applications of natural fiber polymer composites design of natural fiber polymer composites composite manufacturing techniques and agriculture waste manufacturing composite material testing methods The first section of the book deals with the application of textile composites in the industry and the properties of the natural fibers, providing an understanding of the history of natural fiber composites as well as an analysis of the different properties of different natural fibers. The second section goes on to explain the textile composites, their classification, different composite manufacturing techniques, and the different pretreatment methods for the natural fibers to be used in composite formation. It also analyzes the composite material design under different types of loading and the mechanism of failure of the natural fiber composite. The effect of the fiber volume fraction of different textile structures is explained. The third section of the book, on composite manufacturing techniques and agriculture waste manufacturing, concerns the natural fiber composite manufacturing techniques, agricultural waste, and the methods of their preparation to be used successfully in the composite, either in the form of fibers particles or nanoparticles. The book then considers the testing methods of the different composite components as well as the final composite materials, giving the principle of the testing standards, either distractive or nondestructive. This book attempts to fill the gap between the role of the textile engineer and the role of the designer of composites from natural fibers. It provides important information on the application of textile composites for textile engineers, materials engineers, and researchers in the area of composite materials.
Download or read book Processability of Polymeric Composites written by Anup K. Ghosh and published by Springer Nature. This book was released on 2019-12-07 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the processing of advanced composites and their various technologies, with special emphasis on the distinct characteristics of processability. The book covers the impact of different processing techniques on the performance and characteristics of the final product. Written with a didactic approach, the volume contains extensive illustrations and pedagogic features (including examples and exercises) to help the reader assess and correlate existing technologies. The book will be useful as a text in graduate courses in processing of polymers and composites and can additionally be used as a professional reference.
Download or read book Biodegradable Polymer Blends and Composites from Renewable Resources written by Long Yu and published by John Wiley & Sons. This book was released on 2009-03-25 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodegradable Polymer Blends and Composites from Renewable Resources provides a comprehensive, current overview of biopolymeric blends and composites and their applications in various industries. The book is organized according to the type of blend or composite. For each topic, the relationship between the structure of the blends/composites and their respective properties is explored, with particular focus on interface, compatibility, mechanical, and thermal properties. Real-life applications and potential markets are discussed. This is a premier reference for graduate students and researchers in polymer science, chemical and bio engineering, and materials science.
