Download or read book Polymer Swelling Effects on Mechanical and Electrochemical Properties for Battery Adhesives and Ion Exchange Membranes written by Jiho Seo and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents two main research thrusts based on polymer swelling effects in different environments. The first topic focuses on the mechanical properties of epoxy adhesives swollen in electrolyte solutions to use for bonding lithium ion battery-based sandwich structures. The second topic describes the electrochemical properties of photocurable micro-patterned anion exchange membranes in terms of water uptake, permselectivity, and ionic resistance.
Download or read book Studies on Ionic Conductivity and Electrochemical Stability of Plasticized Photopolymerized Polymer Electrolyte Membranes for Solid State Lithium Ion Batteries written by Ruixuan He and published by . This book was released on 2016 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: In pursuit of safer and more flexible solid-state lithium ion batteries, solid polymer electrolytes have emerged as a promising candidate. The present dissertation entails exploration of solid plasticized, photopolymerized (i.e. ultraviolet-cured) polymer electrolyte membranes (PEM) for fulfilling the critical requirements of electrolytes, such as high ionic conductivity and good thermal and electrochemical stability, among others. Electrochemical performance of PEMs containing lithium ion half-cells was also investigated at different two temperatures.Phase diagram approach was adopted to guide the fabrication of two types of plasticized PEMs. Prepolymer poly (ethylene glycol) diacrylate (PEGDA) was used as a matrix for building an ionic conductive and mechanically sturdy network. Lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) was incorporated as a source of lithium ions, while a solid plasticizer succinonitrile (SCN) and a liquid plasticizer tetraethylene glycol dimethyl ether (TEGDME) were incorporated in the respective systems. The important role of plasticizer on the enhancement of ionic conductivity (s) to the superionic conductive level (10−3 S/cm) was revealed in both systems. It is worth noting that photopolymerization induced crystallization (PIC) occurred during UV-curing in the SCN-rich region of the ternary PEGDA/LiTFSI/SCN ternary mixtures. The PEM thus formed contained a plastic crystal phase, which showed lower s relative to their amorphous PEGDA/LiTFSI/TEGDME counterpart. Comparisons on other thermal and electrochemical properties of the two types of PEMs are presented in Chapter IV. For the PEGDA/LiTFSI/SCN PEMs, fundamental study was carried out to clarify the relationship between s and glass transition temperature (Tg). In lithium salt/polymer binary PEMs, increase in Tg and reduction in s were observed; these may be attributed to ion-dipole complexation between dissociated lithium cations and ether oxygen upon salt addition. Notably, above the threshold salt concentration of 7 mol %, dual loss tangent peaks were observed in dynamic mechanical studies. These might be ascribed to segmental relaxations of ion-dipole complexed networks and that of polymer chains surrounding the undissociated lithium salt acting like "fillers". Upon SCN incorporation, these two peaks merged into one that was further suppressed below the Tg of the pure network, whereas s improved to the superionic conductor level. The role of SCN on the s enhancement as both plasticizer for the polymer network and ionizer for the salt is discussed in Chapter V. In order to improve the mechanical toughness of the highly conductive PEGDA/LiTFSI/SCN PEM, effects of prepolymer molecular weight on mechanical and electrochemical properties of PEMs were further investigated. By increasing molecular weight of PEGDA from 700 to 6000 g/mol, toughness and elongation at break were enhanced as expected. Interestingly, improved ionic conductivity was achieved simultaneously. The dual improvement may be attributed to the less chemical crosslinked points and the more flexible chain motion in the looser network of PEGDA6000-PEM relative to its PEGDA700 counterpart. Subsequently, high thermal stability and electrochemical stability of both types of PEMs, as well as the satisfactory room temperature charge/discharge cycling performance of PEM containing lithium ion half-cells were observed. The pertinent information is documented in Chapter VI. Finally, the investigation of the charge/discharge cycling performance of solid-state LiFePO4 half-cells at an elevated temperature of 60° C is discussed in Chapter VII. In the half-cells, particularly, SCN plasticized PEMs with and without electrolyte modifier lithium bis(oxalato)borate (LiBOB) were respectively employed. Rapid decline of capacity and increase of cell resistance were found in the unmodified PEM containing cell; however, these deteriorations were greatly suppressed upon LiBOB modification. Electrochemical and thermal compatibility of PEMs towards different electrodes were examined in several symmetric cells and half-cells. Detailed characterization on LiFePO4 electrodes and PEMs retrieved from these cells implied that the observed battery failure might be triggered by an amide-forming side reaction that took place at the interface of a SCN plasticized PEM and a lithium electrode at high temperature. Of particular importance is the fact that this detrimental side reaction was effectively suppressed upon LiBOB electrolyte modifier addition. Plausible mechanisms are discussed.
Download or read book Structure and Electrochemical Properties of Holographically Polymerized Polymer Electrolyte Membranes for Lithium Batteries written by Derrick M. Smith and published by . This book was released on 2017 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing demand for mobile technology, the next generation of power storage devices must be realized. The insertion-type electrodes typically used in commercially available secondary batteries have low capacitances; for instance, a graphitic anode has a theoretical specific capacitance of 372 mAhg-1. The most promising route to increasing the energy density is by switching the anode to Li metal, which has a specific capacitance of 3860 mAhg-1, and using stabilizing additives for the latter. However, Li metal experiences unacceptable Li dendritic failure at consumer operating conditions. Polymer electrolyte membranes (PEMs) have been explored over the past four decades to address this; however, a suitable material has not yet been found to address this failure mechanism prohibiting commercialization. In this dissertation, we demonstrate using holographic polymerization induced phase separation as a facile top-down technique to nanostructure the PEM and exploit the long-range phase separation offered by this technique to decouple the mechanical and ion transport properties. Isotropically floodlit samples were used as a baseline to examine the nanostructuring effect. For example, with 30% electrolyte, the baseline isotropic samples showed a room temperature conductivity and tensile modulus of 1.5 x 10-6 S/cm and 156 MPa, where the 1D lamellar patterned PEMs boasted an impressive improvement to both properties, 2.0 x 10-5 S/cm and 618 MPa. The nanostructuring and mechanical enhancemet effects regarding Li metal and dendritic growth were also observed using galvanostatic polarization. It was found that there was a tradeoff between certain nanostructure geometries that increased the current density and the mechanical enhancement provided by said nanostructures. Two nanostructures exhibited a 100-150 fold increase in cell lifetime before dendritic failure over the predicted lifetime based on Chazalviez's model. This top-down nanostructuring technique also uniquely offers a new exciting platform for exploring other structure-property relationships in electrochemical membranes.
Download or read book Synthetic Methods in Step Growth Polymers written by Martin E. Rogers and published by John Wiley & Sons. This book was released on 2003-08-08 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alles über die Stufenwachstums-Polymerisation - von Syntheseverfahren und Reinigungsmethoden bis zur Charakterisierung der Produkte - finden Sie in diesem Buch. - bietet einen Ausblick auf zukünftige Trends - mit historischen Informationen - erläutert die Klassifikation von Stufenwachstumspolymeren
Download or read book Polymer Electrolyte Fuel Cell Durability written by Felix N. Büchi and published by Springer Science & Business Media. This book was released on 2009-02-08 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a significant number of R&D projects, performed mostly after 2000, devoted to the understanding and prevention of performance degradation processes in polymer electrolyte fuel cells (PEFCs). The extent and severity of performance degradation processes in PEFCs were recognized rather gradually. Indeed, the recognition overlapped with a significant number of industrial dem- strations of fuel cell powered vehicles, which would suggest a degree of technology maturity beyond the resaolution of fundamental failure mechanisms. An intriguing question, therefore, is why has there been this apparent delay in addressing fun- mental performance stability requirements. The apparent answer is that testing of the power system under fully realistic operation conditions was one prerequisite for revealing the nature and extent of some key modes of PEFC stack failure. Such modes of failure were not exposed to a similar degree, or not at all, in earlier tests of PEFC stacks which were not performed under fully relevant conditions, parti- larly such tests which did not include multiple on–off and/or high power–low power cycles typical for transportation and mobile power applications of PEFCs. Long-term testing of PEFCs reported in the early 1990s by both Los Alamos National Laboratory and Ballard Power was performed under conditions of c- stant cell voltage, typically near the maximum power point of the PEFC.
Download or read book Lithium Ion Batteries written by Gianfranco Pistoia and published by Newnes. This book was released on 2013-12-16 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithium-Ion Batteries features an in-depth description of different lithium-ion applications, including important features such as safety and reliability. This title acquaints readers with the numerous and often consumer-oriented applications of this widespread battery type. Lithium-Ion Batteries also explores the concepts of nanostructured materials, as well as the importance of battery management systems. This handbook is an invaluable resource for electrochemical engineers and battery and fuel cell experts everywhere, from research institutions and universities to a worldwide array of professional industries. Contains all applications of consumer and industrial lithium-ion batteries, including reviews, in a single volume Features contributions from the world's leading industry and research experts Presents executive summaries of specific case studies Covers information on basic research and application approaches
Download or read book PEM Water Electrolysis written by Dmitri Bessarabov and published by Academic Press. This book was released on 2018-08-04 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Water Electrolysis, a volume in the Hydrogen Energy and Fuel Cell Primers series presents the most recent advances in the field. It brings together information that has thus far been scattered in many different sources under one single title, making it a useful reference for industry professionals, researchers and graduate students. Volumes One and Two allow readers to identify technology gaps for commercially viable PEM electrolysis systems for energy applications and examine the fundamentals of PEM electrolysis and selected research topics that are top of mind for the academic and industry community, such as gas cross-over and AST protocols. The book lays the foundation for the exploration of the current industrial trends for PEM electrolysis, such as power to gas application and a strong focus on the current trends in the application of PEM electrolysis associated with energy storage. Presents the fundamentals and most current knowledge in proton exchange membrane water electrolyzers Explores the technology gaps and challenges for commercial deployment of PEM water electrolysis technologies Includes unconventional systems, such as ozone generators Brings together information from many different sources under one single title, making it a useful reference for industry professionals, researchers and graduate students alike
Download or read book Encyclopedia of Applied Electrochemistry written by Gerhard Kreysa and published by Springer. This book was released on 2014-04-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: While electrochemistry deals with the interrelation of electrical and chemical phenomena, applied electrochemistry is the interface between fundamental science and practical applications. It is vitally important for our industrial society of today and even more so for its future. A successful response to global challenges such as securing energy supply, developing energy-efficient and sustainable processes and materials, environmentally friendly technologies, or monitoring physiological processes for health care requires electrochemical research and engineering. The Encyclopedia of Applied Electrochemistry provides an authoritative compilation of entries dealing with all applied aspects of electrochemistry, including basic theoretical concepts, and instrumentation. As a unique, one-stop resource for sound and digested knowledge in this field, the Encyclopedia of Applied Electrochemistry comprises the first applications-oriented interdisciplinary work on the critical technologies underlying key advances such as energy efficiency (e.g. batteries for electric cars, etc.), green and sustainable chemical industries, new materials (corrosion resistant and low-friction), and biomedical sensors.
Download or read book Japanese Technical Abstracts written by and published by . This book was released on 1988 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrode Materials for Energy Storage and Conversion written by Mesfin A. Kebede and published by CRC Press. This book was released on 2021-11-17 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest developments and materials used in electrochemical energy storage and conversion devices, including lithium-ion batteries, sodium-ion batteries, zinc-ion batteries, supercapacitors and conversion materials for solar and fuel cells. Chapters introduce the technologies behind each material, in addition to the fundamental principles of the devices, and their wider impact and contribution to the field. This book will be an ideal reference for researchers and individuals working in industries based on energy storage and conversion technologies across physics, chemistry and engineering. FEATURES Edited by established authorities, with chapter contributions from subject-area specialists Provides a comprehensive review of the field Up to date with the latest developments and research Editors Dr. Mesfin A. Kebede obtained his PhD in Metallurgical Engineering from Inha University, South Korea. He is now a principal research scientist at Energy Centre of Council for Scientific and Industrial Research (CSIR), South Africa. He was previously an assistant professor in the Department of Applied Physics and Materials Science at Hawassa University, Ethiopia. His extensive research experience covers the use of electrode materials for energy storage and energy conversion. Prof. Fabian I. Ezema is a professor at the University of Nigeria, Nsukka. He obtained his PhD in Physics and Astronomy from University of Nigeria, Nsukka. His research focuses on several areas of materials science with an emphasis on energy applications, specifically electrode materials for energy conversion and storage.
Download or read book Ion Exchange Technology I written by Inamuddin Dr. and published by Springer Science & Business Media. This book was released on 2012-06-02 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion-exchange Technology I: Theory and Materials describes the theoretical principles of ion-exchange processes. More specifically, this volume focuses on the synthesis, characterization, and modelling of ion-exchange materials and their associated kinetics and equilibria. This title is a highly valuable source not only to postgraduate students and researchers but also to industrial R&D specialists in chemistry, chemical, and biochemical technology as well as to engineers and industrialists.
Download or read book Polysaccharide Hydrogels written by Pietro Matricardi and published by CRC Press. This book was released on 2016-01-05 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogels are an emerging area of interest in medicine as well as pharmaceutics, and their physico-chemical characterization is fundamental to their practical applications. Compared with synthetic polymers, polysaccharides that are widely present in living organisms and come from renewable sources are extremely advantageous for hydrogel formation.
Download or read book Electrochemical Impedance Spectroscopy written by Mark E. Orazem and published by John Wiley & Sons. This book was released on 2011-10-13 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using electrochemical impedance spectroscopy in a broad range of applications This book provides the background and training suitable for application of impedance spectroscopy to varied applications, such as corrosion, biomedical devices, semiconductors and solid-state devices, sensors, batteries, fuel cells, electrochemical capacitors, dielectric measurements, coatings, electrochromic materials, analytical chemistry, and imaging. The emphasis is on generally applicable fundamentals rather than on detailed treatment of applications. With numerous illustrative examples showing how these principles are applied to common impedance problems, Electrochemical Impedance Spectroscopy is ideal either for course study or for independent self-study, covering: Essential background, including complex variables, differential equations, statistics, electrical circuits, electrochemistry, and instrumentation Experimental techniques, including methods used to measure impedance and other transfer functions Process models, demonstrating how deterministic models of impedance response can be developed from physical and kinetic descriptions Interpretation strategies, describing methods of interpretating of impedance data, ranging from graphical methods to complex nonlinear regression Error structure, providing a conceptual understanding of stochastic, bias, and fitting errors in frequency-domain measurements An overview that provides a philosophy for electrochemical impedance spectroscopy that integrates experimental observation, model development, and error analysis This is an excellent textbook for graduate students in electrochemistry, materials science, and chemical engineering. It's also a great self-study guide and reference for scientists and engineers who work with electrochemistry, corrosion, and electrochemical technology, including those in the biomedical field, and for users and vendors of impedance-measuring instrumentation.
Download or read book Hydrogen Based Energy Conversion written by Jin-Soo Park and published by MDPI. This book was released on 2021-04-28 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of the nine sections: i) the first three sections are related to polymeric electrolyte composites; ii) the next two sections relate to gas diffusion layers (GDLs); iii) the next two sections relate to membrane¬–electrode assembly (MEA); iv) and the final two sections deal with the numerical simulation of flow fields for polymer electrolyte fuel cells (PEFCs). All sections describe recent results of the study of the main components of PEFC stacks. The studies provide the underlying material, electrochemical, and/or mechanical aspects that enhance the mass transport of gas, ions (liquid), and electrons for a better performance of PEFCs and the electrochemical reactions at the triple-phase boundary in electrodes. Each study offers the fundamentals, a comprehensive background, and cutting-edge technology on the aforementioned materials and mass transport phenomena.
Download or read book Biopolymer Electrolytes written by Sudhakar Y N and published by Elsevier. This book was released on 2018-06-09 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer Electrolytes: Fundamentals and Applications in Energy Storage provides the core fundamentals and applications for polyelectrolytes and their properties with a focus on biopolymer electrolytes. Increasing global energy and environmental challenges demand clean and sustainable energy sources to support the modern society. One of the feasible technologies is to use green energy and green materials in devices. Biopolymer electrolytes are one such green material and, hence, have enormous application potential in devices such as electrochemical cells and fuel cells. Features a stable of case studies throughout the book that underscore key concepts and applications Provides the core fundamentals and applications for polyelectrolytes and their properties Weaves the subject of biopolymer electrolytes across a broad range of disciplines, including chemistry, chemical engineering, materials science, environmental science, and pharmaceutical science
Download or read book Bioinspired Actuators and Sensors written by Minoru Taya and published by Cambridge University Press. This book was released on 2016-10-13 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: From experts in engineering and biology, this is the first book to integrate sensor and actuator technology with bioinspired design.
Download or read book Japanese Technical Periodical Index written by and published by . This book was released on 1987 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
