Download or read book Polymer Surfaces and Interfaces written by K. L. Mittal and published by VSP. This book was released on 1997-04 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric materials are used for a legion of applications in a wide array of technological areas, and their proper surface/interface characteristics are of cardinal importance for their applications. Therefore, the need to characterize polymer surfaces/interfaces and their suitable modification to impart desired characteristics is quite patent. This book chronicles the proceedings of the Symposium on Polymer Surfaces and Interfaces: Characterization, Modification and Application held as a part of the Society of Plastics Engineers Annual Technical Conference, Boston, May 7--11, 1995. The articles in this book address many aspects of polymer surfaces and interfaces. Topics covered include: various ways (chemical, photochemical, laser, flame, corona) to modify polymer surfaces; modification of contact lens surfaces; various ways to analyze/characterize polymer surfaces; metal/polymer interfaces; metal/polyimide adhesion; metal/self-assembled organic monolayer interfaces; polymer alignment layers for liquid crystals; alignment of liquid crystal surfaces; polyimide alignment layers; molecular re-orientation of polymer surfaces; plasma polymerized organic coatings; epoxy/fiber interphase; epoxy underfill materials for packaging integrated circuits; transport in polymers; polymer miscibility; and cell adhesion.

Download or read book Polymer Surfaces and Interfaces Characterization Modification and Application written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric materials are used for a legion of applications in a wide array of technological areas, and their proper surface/interface characteristics are of cardinal importance for their applications. Therefore, the need to characterize polymer surfaces/interfaces and their suitable modification to impart desired characteristics is quite patent. This book chronicles the proceedings of the Symposium on Polymer Surfaces and Interfaces: Characterization, Modification and Application held as a part of the Society of Plastics Engineers Annual Technical Conference, Boston, May 7--11, 1995. The articles in this book address many aspects of polymer surfaces and interfaces. Topics covered include: various ways (chemical, photochemical, laser, flame, corona) to modify polymer surfaces; modification of contact lens surfaces; various ways to analyze/characterize polymer surfaces; metal/polymer interfaces; metal/polyimide adhesion; metal/self-assembled organic monolayer interfaces; polymer alignment layers for liquid crystals; alignment of liquid crystal surfaces; polyimide alignment layers; molecular re-orientation of polymer surfaces; plasma polymerized organic coatings; epoxy/fiber interphase; epoxy underfill materials for packaging integrated circuits; transport in polymers; polymer miscibility; and cell adhesion.

Download or read book Polymer Surfaces and Interfaces written by Manfred Stamm and published by Springer Science & Business Media. This book was released on 2008-01-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: In what is an extremely practical and applicable new work, experts provide concise explanations, with examples and illustrations, of the key techniques in this important field. In each case, after basic principles have been reviewed, applications of the experimental techniques are discussed and illustrated with specific examples. Scientists and engineers in research and development will benefit from an application-oriented book that helps them to find solutions to both fundamental and applied problems. They will know that the surfaces and interfaces of polymers play an important role in most of the application areas of polymers, from moulds, foils, and composites, to biomaterials and applications in micro- and nanotechnology.

Download or read book Polymer Surface Modification and Characterization written by Chi-Ming Chan and published by . This book was released on 1994 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Surfaces and Interfaces II written by W. J. Feast and published by John Wiley & Sons. This book was released on 1993-04-28 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Surfaces and Interfaces II W. J. Feast, University of Durham, Durham, UK H. S. Munro, Courtaulds Research, Coventry, UK R. W. Richards, University of Durham, Durham, UK This volume presents a collection of review papers, based on the 'Polymer Surfaces and Interfaces II International Symposium' which took place in Durham (UK), July 1991 Compiled here, the papers present an authoritative overview of current technology and research on polymer surfaces, by acknowledged experts in their specialist fields. Individual reviews cover analytical techniques, properties, reactions, modelling and synthesis of surfaces and interfaces. Polymer Surfaces and Interfaces II will be of interest to polymer scientists, surface scientists, chemists, physicists and biologists, working in industrial and academic laboratories. Reviews of the previous volume 'Altogether a most useful addition to polymer science' -- Physics Bulletin 'The book can be unreservedly recommended to chemists and materials scientists with an interest in adhesion, biomaterials, polymer dispersions and molecular engineering' -- Polymer Contents Surface Chemistry of Chemically Resistant Polymers; T. G. Bee, A. J. Dias, N. L. Franchina, B. U. Kolb, K.-W. Lee, P. A. Patton, M. S. Shoichet and T. J. McCarthy Self-assembled Molecular Films as Polymer Surface Models; D. L. Allara, S. V. Atre and A. N. Parikh Non-equilibrium Effects in Polymeric Stabilization; M. E. Cates and J. T. Brooks Ion Beam Analysis of Composition Profiles near Polymer Surfaces and Interfaces; R. A. L. Jones Laser Light Scattering; J. C. Earnshaw Characterization of Interfaces in Polymers and Composites using Raman Spectroscopy; R. J. Young Surface Modification and Analysis of Ultra-high-modulus Polyethylene Fibres for Composites; G. A. George SSIMS -- An Emeriging Technique for the Surface Chemical Analysis of Polymeric Biomaterials; M. C. Davies Scanning Probe Microscopy -- Current Issues in the Analysis of Polymeric Biomaterials; M. C. Davies, D. E. Jackson, C. J Roberts, S. J. B. Tendler, K. M. Kreusel, M. J. Wilkins and P. M. Williams Surface Grafting of a Thrombin Substrate on a Polymer Membrane and the Inhibition of Thrombin Activity Leading to Non-thrombogenicity; Y. Ito, L.-S. Liu and Y. Imanishi Acid--Base Effects at Polymer Interfaces; C. J. van Oss

Download or read book Polymer Surface Characterization written by Luigia Sabbatini and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-01-19 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated edition provides a broad approach to the surface analysis of polymers being of high technological interest. Modern analytical techniques, potential applications and recent advances in instrumental apparatus are discussed. The self-consistent chapters are devoted to spectroscopic and microscopic techniques which represent powerful tools for the characterization of morphology and chemical, physical, mechanical properties of polymer surfaces, interfaces, and thin fi lms. Selection of techniques which can properly address very shallow depth of surfaces, spanning from few angstroms to tens of nanometers Interaction of polymer surfaces with their surroundings is pointed out as a critical issue for specifi c applications

Download or read book Polymer Surface Modification Relevance to Adhesion Volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2023-01-06 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book chronicles the proceedings of the Second International Symposium on Polymer Surface Modification: Relevance to Adhesion held Newark, New Jersey, May 24--26, 1999. Polymeric materials are intrinsically not very adhesionable and this necessitates their surface treatment to enhance their adhesion characteristics to other materials. Since the first symposium on this topic, held in 1993, there has been a tremendous R&D activity in devising novel or ameliorating the existing techniques for surface modification of polymers. This volume contains a total of 32 papers, which have been rigorously peer-reviewed and suitably revised before inclusion in this volume. The book is divided into three parts as follows. Part 1: Plasma Surface Modification Techniques; Part 2: Other/Miscellaneous Surface Modification Techniques; and Part 3: General Papers. The topics covered include: plasma surface modification of a variety of polymers using various plasma gases; atmospheric plasma system; surface functionalization; ultrahydrophobic polymeric surfaces; metallization of plasma treated polymers; surface modification of polymers via molecular design for adhesion promotion; wet chemical methods for polymer surface modification; laser surface modification of various polymers; UV/ozone treatment; surface and interface studies of treated polymer surfaces by an array of techniques; bioadhesion of polymeric biomaterials to tissue; polymer-fiber systems; and plasma deposited coatings.

Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2019-12-04 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.

Download or read book Polymer Surface Modification written by K. L. Mittal and published by BRILL. This book was released on 2009-02-28 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also there is acute interest and need to devise new, improved and economical means to modify polymer surfaces. This book is divided into three parts as follows: Part 1: Surface Modification Techniques; Part 2: Interfacial Aspects and Adhesion; Part 3: General Papers. The topics covered include: various techniques for surface modification including plasma (both vacuum and atmospheric pressure), ozone, photografting, UV photo-oxidation, laser, use of charged particles and others for a variety of polymers; longevity of surface treatment; hydrophobic recovery; fabrication of high-density polymer nano-dots; immobilization of organometallic catalysts on textile carrier materials; polymer membrane antifouling properties; electroless metallization of polymers; effects of surface modification on interfacial shear strength of composites, cord/rubber adhesion, adhesion of UV-curable coatings and attachment of hyperbranched polymers; plasma polymerization; block copolymers; application of plasma technology in decontamination of heat-sensitive polymer surfaces. In essence this book reflects the current state-of-the-knowledge in the arena and represents the work of many renowned scientists and technologists. It should be of interest to anyone with a desire or need to learn the latest R&D activity in this domain and the information contained here should be very valuable in deciding the optimum surface modification technique for his/her particular requirements.

Download or read book Polymeric Biomaterials for Tissue Regeneration written by Changyou Gao and published by Springer. This book was released on 2016-10-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews state-of-the-art of polymeric biomaterials for regenerative medicine, and highlights advances in both basic science and clinical practice. It summarizes the latest techniques in polymeric scaffold fabrication, delivery carriers, physicochemical property modulation, as well as their influence on adhesion and the performance of biomolecules, cells and tissues. It also describes methods for creating biofunctional surfaces/interfaces and subsequently modulating the host response to implantable materials. Lastly, it discusses the applications of biomaterials and constructs in soft-tissue regenerative medicine. It is a valuable resource for materials scientists and engineers wishing to identify research priorities to fulfill clinical needs and provides physicians with insights into emerging novel biomaterials. This integrated approach also offers engineering students a sense of the relevance of materials science in the development of novel therapeutic strategies.

Download or read book Polymer Surface Modification Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2004-08-26 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fourth International Symposium on Polymer Surface Modification: Relevance to Adhesion held under the auspices of MST Conferences, LLC in Orlando, FL, June 9-11, 2003. Polymers are used for a variety of purposes in a host of technological applications and even a cursory look at the literature will evince that currently there is tremendous interest and R&D activity in the area of polymer surface modification to attain their desired surface characteristics, particularly to enhance their adhesion. This volume contains a total of 25 papers which were properly peer reviewed, revised and edited. So this book is not merely a collection of papers, rather represents the highest standard of publication. The book is divided into three parts: 1. Plasma Surface Modification Techniques; 2. Other / Miscellaneous Surface Modification Techniques; and 3. General Papers. The topics covered include: low pressure plasma surface modification of a variety of polymers using various gases; atmospheric pressure plasma treatment; improvement of stain release properties of fabrics; modification of electrostatic properties of polymers; photon-based processes for surface modification of fibers; excimer UV light treatment; excimer laser surface treatment; low-energy ion treatment; photo-grafting and photo-curing; metallization of treated polymers; chemical (wet) functionalization of polymers; adhesion of paints to thermoplastic substrates; polymer release surfaces; nanolithography in polymer films; gas barrier properties of ceramic layers on polymers; and modification of interphase layer and relevance to adhesion. This volume and its predecessors containing plentiful information should serve as a comprehensive source of latest R&D activity in the highly technologically important arena of polymer surface modification. Anyone interested –centrally or peripherally– in knowing or learning about the various ways to modify polymer surfaces should find this book of immense value.

Download or read book Polyimides and Other High Temperature Polymers Synthesis Characterization and Applications volume 2 written by Kash L. Mittal and published by CRC Press. This book was released on 2003-03-01 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, held in Newark, New Jersey, December 3-6, 2001. Polyimides possess many desirable attributes, so this class of materials has found applications in many technologies ranging from

Download or read book Polymer Surface Modification to Enhance Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2024-04-02 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: POLYMER SURFACE MODIFICATION TO ENHANCE ADHESION This unique, comprehensive and groundbreaking book is the first on this important subject. Polymer Surface Modification to Enhance Adhesion comprises 13 chapters and is divided into two parts: Part 1: Energetic Treatments; and Part 2: Chemical Treatments. Topics covered include atmospheric pressure plasma treatment of polymers to enhance adhesion; corona treatment of polymer surfaces to enhance adhesion; flame surface treatment of polymers to enhance adhesion; vacuum UV photo-oxidation of polymer surfaces to enhance adhesion; optimization of adhesion of polymers using photochemical surface modification UV/Ozone surface treatment of polymers to enhance adhesion; adhesion enhancement of polymer surfaces by ion beam treatment; polymer surface modification by charged particles; laser surface modification of polymeric materials; competition in adhesion between polysort and monosort functionalized polyolefinic surfaces; amine-terminated dendritic materials for polymer surface modification; arginine-glycine-aspartic acid (RGD) modification of polymer surfaces; and adhesion promoters for polymer surfaces. Audience The book will be of great interest to polymer scientists, surface scientists, adhesionists, materials scientists, plastics engineers, and to those involved in adhesive bonding, packaging, printing, painting, metallization, biological adhesion, biomedical devices, and polymer composites.

Download or read book Surface Modification of Biomaterials written by Rachel Williams and published by Elsevier. This book was released on 2010-11-25 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface modification of biomaterials plays a significant role in determining the outcome of biological-material interactions. With the appropriate modification a material’s surface can be tailored to improve biocompatibility, adhesion and cell interactions. Consequently surface modification is vital in the development and design of new biomaterials and medical devices. Surface modification of biomaterials reviews both established surface modifications and those still in the early stages of research and discusses how they can be used to optimise biological interactions and enhance clinical performance.Part one begins with chapters looking at various types and techniques of surface modification including plasma polymerisation, covalent binding of poly (ethylene glycol) (PEG), heparinisation, peptide functionalisation and calcium phosphate deposition before going on to examine metal surface oxidation and biomaterial surface topography to control cellular response with particular reference to technologies, cell behaviour and biomedical applications. Part two studies the analytical techniques and applications of surface modification with chapters on analysing biomaterial surface chemistry, surface structure, morphology and topography before moving onto discuss modifying biomaterial surfaces to optimise interactions with blood, control infection, optimise interactions with soft tissues, repair and regenerate nerve cells, control stem cell growth and differentiation and to optimise interactions with bone.The distinguished editor and international team of contributors to Surface modification of biomaterials have produced a unique overview and detailed chapters on a range of surface modification techniques which will provide an excellent resource for biomaterials researchers and scientists and engineers concerned with improving the properties of biomaterials. It will also be beneficial for academics researching surface modification. Reviews both established surface modifications and those still in the early stages of research and how they can be used to optimise biological interactions and enhance clinical performance Studies analytical techniques and applications of surface modification with chapters assessing biomaterial surface chemistry, surface structure, morphology and topography Discusses modifying biomaterial surfaces to optimise interactions with blood and soft tissues and also to repair and regenerate nerve cells and control infection

Download or read book Recent Advances in Adhesion Science and Technology in Honor of Dr Kash Mittal written by Wojciech (Voytek) Gutowski and published by CRC Press. This book was released on 2013-12-31 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface of an object is the first thing we see or touch. Nearly every article or object we encounter at home, in industry, land transportation, aerospace, or the medical field in some way uses an adhesive, a sealant, or a decorative coating. Adhesion science provides the technology and the know-how behind these applications. Recent Advances in

Download or read book Surfactant Science and Technology written by Laurence S. Romsted and published by CRC Press. This book was released on 2014-05-05 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactant research explores the forces responsible for surfactant assembly and the critical industrial, medical, and personal applications, including viscosity control, microelectronics, drug stabilization, drug delivery, cosmetics, enhanced oil recovery, and foods. Surfactant Science and Technology: Retrospects and Prospects, "a Festschrift in ho

Download or read book Plasma Modification of Polyolefins written by N. S. Baneesh and published by Springer Nature. This book was released on 2021-11-22 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses plasma modification of polyolefin surfaces. It comprises 21 chapters divided into three major sections. The first section covers the different techniques used for plasma modification of polyolefin surfaces and the effects of various gases as a surrounding medium, while the second provides a detailed analysis of the physics and chemistry of plasma modification and discusses various innovative characterization techniques, as well as ageing of the modified surface. It focuses on the analysis of changes in polymers’ surface chemistry using various spectroscopic techniques, and of changes in their surface morphology after plasma treatment using optical microscopy, electron microscopy and atomic force microscopy. In addition, it provides detailed information on the characterization of modified polymer surfaces. The book’s third and last section covers a range of applications of plasma-modified polyolefin surfaces varying from the packaging industry to the biomedical field, and shares valuable insights on the lifecycle analysis of plasma modification and modified surfaces.