Download or read book Polymer Science Macromolecular architectures and soft nano objects written by and published by . This book was released on 2012-01-01 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)

Download or read book Complex Macromolecular Architectures written by Nikos Hadjichristidis and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of CMA (complex macromolecular architecture) stands at the cutting edge of materials science, and has been a locus of intense research activity in recent years. This book gives an extensive description of the synthesis, characterization, and self-assembly of recently-developed advanced architectural materials with a number of potential applications. The architectural polymers, including bio-conjugated hybrid polymers with poly(amino acid)s and gluco-polymers, star-branched and dendrimer-like hyperbranched polymers, cyclic polymers, dendrigraft polymers, rod-coil and helix-coil block copolymers, are introduced chapter by chapter in the book. In particular, the book also emphasizes the topic of synthetic breakthroughs by living/controlled polymerization since 2000. Furthermore, renowned authors contribute on special topics such as helical polyisocyanates, metallopolymers, stereospecific polymers, hydrogen-bonded supramolecular polymers, conjugated polymers, and polyrotaxanes, which have attracted considerable interest as novel polymer materials with potential future applications. In addition, recent advances in reactive blending achieved with well-defined end-functionalized polymers are discussed from an industrial point of view. Topics on polymer-based nanotechnologies, including self-assembled architectures and suprastructures, nano-structured materials and devices, nanofabrication, surface nanostructures, and their AFM imaging analysis of hetero-phased polymers are also included. Provides comprehensive coverage of recently developed advanced architectural materials Covers hot new areas such as: click chemistry; chain walking; polyhomologation; ADMET Edited by highly regarded scientists in the field Contains contributions from 26 leading experts from Europe, North America, and Asia Researchers in academia and industry specializing in polymer chemistry will find this book to be an ideal survey of the most recent advances in the area. The book is also suitable as supplementary reading for students enrolled in Polymer Synthetic Chemistry, Polymer Synthesis, Polymer Design, Advanced Polymer Chemistry, Soft Matter Science, and Materials Science courses. Color versions of selected figures can be found at www.wiley.com/go/hadjichristidis

Download or read book Macromolecular Architectures written by Jöns G. Hilborn and published by Springer. This book was released on 2003-07-03 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular manipulation of nano- and microstructures paves the way to produce organic polymer materials by design. Such architectures comprise both the synthesis and the kinetics and thermodynamics of macromolecular organization and is the theme of this volume. The book consists of four articles reviewing living polymerization to produce precisely defined linear polyesters, comparing them to other living polymerization techniques. The articles also deal with the synthesis of polymeric dendrimers, either by the convergent or divergent approach; block copolymers synthesis, to define micromorphology in high performance polymers; and thereby tailoring their thermal, chemical, mechanical and dielectrical properties, and finally kinetics and thermodynamics for microstructural organization in macroporous thermosets.

Download or read book Macromolecular Architectures written by Jöns G. Hilborn and published by Springer. This book was released on 2013-11-13 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular manipulation of nano- and microstructures paves the way to produce organic polymer materials by design. Such architectures comprise both the synthesis and the kinetics and thermodynamics of macromolecular organization and is the theme of this volume. The book consists of four articles reviewing living polymerization to produce precisely defined linear polyesters, comparing them to other living polymerization techniques. The articles also deal with the synthesis of polymeric dendrimers, either by the convergent or divergent approach; block copolymers synthesis, to define micromorphology in high performance polymers; and thereby tailoring their thermal, chemical, mechanical and dielectrical properties, and finally kinetics and thermodynamics for microstructural organization in macroporous thermosets.

Download or read book Polymer Science written by Vasant R. Gowariker and published by New Age International. This book was released on 1986 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Macromolecular Engineering written by Alex Lubnin and published by Elsevier. This book was released on 2021-02-09 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macromolecular Engineering: Design, Synthesis and Application of Polymers explores the role of macromolecular engineering in the development of polymer systems with engineered structures that offer the desired combination of properties for advanced applications. This book is organized into sections covering theory and principles, science and technology, architectures and technologies, and applications, with an emphasis on the latest advances in techniques, materials, properties, and end uses – and including recently commercialized, or soon to be commercialized, designed polymer systems. The chapters are contributed by a group of leading figures who are actively researching in the field. This is an invaluable resource for researchers and scientists interested in polymer synthesis and design, across the fields of polymer chemistry, polymer science, plastics engineering, and materials science and engineering. In industry, this book supports engineers, R&D, and scientists working on polymer design for application areas such as biomedical and healthcare, automotive and aerospace, construction and consumer goods. Presents the theory, principles, architectures, technologies, and latest advances in macromolecular engineering for polymer design and synthesis Explains polymer design for cutting-edge applications areas, including coatings, automotive, industrial, household and medical uses Approaches several novel materials, such as polyisobutylene (PIB), polyamide-based polyurethanes, and aliphatic polyesters

Download or read book Single Chain Polymer Nanoparticles written by José A. Pomposo and published by John Wiley & Sons. This book was released on 2017-08-29 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on this important and emerging topic presents an overview of the very latest results obtained in single-chain polymer nanoparticles obtained by folding synthetic single polymer chains, painting a complete picture from synthesis via characterization to everyday applications. The initial chapters describe the synthetics methods as well as the molecular simulation of these nanoparticles, while subsequent chapters discuss the analytical techniques that are applied to characterize them, including size and structural characterization as well as scattering techniques. The final chapters are then devoted to the practical applications in nanomedicine, sensing, catalysis and several other uses, concluding with a look at the future for such nanoparticles. Essential reading for polymer and materials scientists, materials engineers, biochemists as well as environmental chemists.

Download or read book Polymer Science and Nanotechnology written by Ravin Narain and published by Elsevier. This book was released on 2020-06-16 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Science and Nanotechnology: Fundamentals and Applications brings together the latest advances in polymer science and nanoscience. Sections explain the fundamentals of polymer science, including key aspects and methods in terms of molecular structure, synthesis, characterization, microstructure, phase structure and processing and properties before discussing the materials of particular interest and utility for novel applications, such as hydrogels, natural polymers, smart polymers and polymeric biomaterials. The second part of the book examines essential techniques in nanotechnology, with an emphasis on the utilization of advanced polymeric materials in the context of nanoscience. Throughout the book, chapters are prepared so that materials and products can be geared towards specific applications. Two chapters cover, in detail, major application areas, including fuel and solar cells, tissue engineering, drug and gene delivery, membranes, water treatment and oil recovery. Presents the latest applications of polymers and polymeric nanomaterials, across energy, biomedical, pharmaceutical, and environmental fields Contains detailed coverage of polymer nanocomposites, polymer nanoparticles, and hybrid polymer-metallic nanoparticles Supports an interdisciplinary approach, enabling readers from different disciplines to understand polymer science and nanotechnology and the interface between them

Download or read book Nano size Polymers written by Stoyko Fakirov and published by Springer. This book was released on 2016-09-01 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details all current techniques for converting bulk polymers into nano-size materials. The authors highlight various physical and chemical approaches for preparation of nano-size polymers. They describe the properties of these materials and their extensive potential commercial applications.

Download or read book Physical Aspects of Polymer Self Assembly written by P. R. Sundararajan and published by John Wiley & Sons. This book was released on 2016-12-12 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering an overview of principles and techniques, this book covers all major categories of self-assembled polymers – properties, processes, and design. Each chapter focuses on morphology, applications, and advanced concepts to illustrate the advantages of polymer self-assembly across industrial and academic research. • Provides an organized, comprehensive overview of polymer self-assembly, its fundamentals, principles, and applications • Includes chapters on block copolymers, amphiphilic polymers, supramolecular polymers, rotaxenes, polymer gels, dendrimers, and small molecules in polymer matrices • Focuses on novel applications, block copolymer assembly to nanotechnology, photonics and metamaterials, molecular machines and artificial muscle, gels that can be applied to polymer science, materials science, and nanotechnology • Examines state-of-the-art concepts, like lithographic patterning and foldaxane • Discusses challenges and future outlook of a popular and emerging field of study

Download or read book Macromolecular Design of Polymeric Materials written by Hatada and published by CRC Press. This book was released on 1997-01-02 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a range of information on polymers and polymerization techniques, this text covers the gamut of polymer science from synthesis, structure and properties to function and applications. It analyzes speciality polymers, including acrylics, fluoropolymers, polysiplanes, polyphosphazenes, and inorganic and conducting polymers. The book examines the stereochemistry of polymerization and the stereoregularity of polymers.

Download or read book Self Assembled Nanomaterials II written by Toshimi Shimizu and published by Springer Science & Business Media. This book was released on 2008-10-28 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is the creation of useful materials, devices, and systems through the control of matter on the nanometer-length scale. This takes place at the scale of atoms, molecules, and supramolecular structures. In the world of chemistry, the rational design of molecular structures and optimized control of self-assembly conditions have enabled us to control the resultant self-assembled morphologies having 1 to 100-nm dimensions with sing- nanometer precision. This current research trend applying the bottom-up approach to molecules remarkably contrasts with the top-down approach in nanotechnology, in which electronic devices are miniaturizing to smaller than 30 nm. However, even engineers working with state-of-the-art computer te- nology state that maintaining the rate of improvement based on Moore’s law will be the most dif?cult challenge in the next decade. On the other hand, the excellent properties and intelligent functions of a variety of natural materials have inspired polymer and organic chemists to tailor their synthetic organic alternatives by extracting the essential structural elements. In particular, one-dimensional structures in nature with sophis- cated hierarchy, such as myelinated axons in neurons, tendon, protein tubes of tubulin, and spider webs, provide intriguing examples of integrated functions and properties. Against this background, supramolecular self-assembly of one-dimensional architectures like ?bers and tubes from amphiphilic molecules, bio-related molecules, and properly designed self-assembling polymer molecules has - tracted rapidly growing interest.

Download or read book Handbook of Benzoxazine Resins written by Hatsuo Ishida and published by Elsevier. This book was released on 2011-07-13 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a wide overview of the field, fundamental understanding of the synthetic methods and structure/property correlation, as well as studies related to applications in a wide range of subjects. The handbook also provides 1H and 13C NMR spectra, FTIR spectra, DSC and TGA thermograms to aid in research activities. Additional tables on key NMR and FTIR frequencies unique to benzoxazine, heat of polymerization, Tg, and char yield will greatly aid in the choice of proper benzoxazine for a specific application. Provides thorough coverage of the chemistry and applications of benzoxazine resins with an evidence-based approach to enable chemists, engineers and material scientists to evaluate effectiveness Features spectra, which allow researchers to compare results, avoid repetition and save time as well as tables on key NMR frequency, IR frequency, heat of polymerization, of many benzoxazine resins to aid them in selection of materials Written by the foremost experts in the field

Download or read book Basics of Polymer Chemistry written by Muralisrinivasan Natamai Subramanian and published by River Publishers. This book was released on 2017-10-31 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basics of Polymer Chemistry is of great interest to the chemistry audience. The basic properties of polymers, including diverse fundamental and applied aspects, are presented. This book constitutes a basis for understanding polymerization, and it presents a comprehensive overview of the scientific research of polymers. The chapters presented can be used as a reference for those interested in understanding the sustainable development in polymers. Basics of Polymer Chemistry provides a balanced coverage of the key developments in this field, and highlights recent and emerging technical achievements. The topics covered present a comprehensive overview of the subject area and are therefore of interest to professors and students. The recent developments in polymerization using catalysts, homo and copolymerization are presented, and it contains current efforts in designing new polymer architectures. Improved property performance attributes of the polymers by controlling their molecular-structural characteristics such as molecular weight distribution, comonomer type content distribution, and branching level are also discussed.

Download or read book Block Copolymers in Nanoscience written by Massimo Lazzari and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to take a detailed look at one of the key focal points where nanotechnology and polymers meet provides both an introductory view for beginners as well as in-depth knowledge for specialists in the various research areas involved. It investigates all types of application for block copolymers: as tools for fabricating other nanomaterials, as structural components in hybrid materials and nanocomposites, and as functional materials. The multidisciplinary approach covers all stages from chemical synthesis and characterization, presenting applications from physics and chemistry to biology and medicine, such as micro- and nanolithography, membranes, optical labeling, drug delivery, as well as sensory and analytical uses.

Download or read book Processing and Characterization of Multicomponent Polymer Systems written by Jose James and published by CRC Press. This book was released on 2019-03-21 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed the sheer growth of macromolecular concepts and nanotechnology-based innovations in polymer science. Processing and Characterization of Multicomponent Polymer Systems is a collection of contributions from materials science experts across the globe. The fabrication and characterization of polymeric systems are still important in the study of materials science, and the quality measurements of newly designed polymeric stuffs demand systematic and new characterization protocols. The volume highlights some of the latest innovations and principles of nanostructured polymeric materials and polymer nanocomposites. It is devoted to novel architectures at the nano-level with an emphasis on new synthesis and characterization methods. Organized into several sections, the chapters cover a selection of topics on: Biocomposites and nanocomposites Interpenetrating polymeric networks and nanostructured materials Theoretical protocols for polymers and clusters Special topics in polymer processing and polymer coating. This survey will be an important resource for those involved in the field of polymer materials design for advanced technologies, including scientists, engineers, and budding researchers working in the area of polymer science and nanotechnology.