Download or read book Polymer Science and Technology for Engineers and Scientists written by R. A. Pethrick and published by Wiley. This book was released on 2010-05-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough introduction to polymer science covering a wide range of technique for the fabrication of articles from thermoplastic and thermoset resins. Polymers and composites are widely used for a range of applications in engineering and technology. Selecting the correct material which is fit for purpose is a critical decision faced by engineers and scientists who do not necessarily have an in-depth knowledge of the chemistry or physics of polymers. This text book provides a practical insight into the factors which influence the performance of a polymer or composite allowing informed selections to be made. It is the result of thirty years of teaching polymer science and technology to engineers and scientists and provides a solid foundation from which more advanced study may be developed. The book complements introductory courses on polymers and composites, but also contains specialist material on the chemistry and physics of polymers appropriate for scientists seeking a general knowledge of polymer science. The production of articles from thermoplastics and thermoset resins is considered with respect to the vital issue of fabrication method and a broad appreciation polymers as adhesives, in medical applications and in the fabrication of semiconductor circuits. Also included are the important topics of adhesion, fatigue, viscoelasticity, basic composite design, theoretical description of polymer, polymer synthesis and characterization.
Download or read book Polymer Science and Technology for Scientists and Engineers written by Richard Arthur Pethrick and published by . This book was released on 2010 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This introductory text in the field of plastics provides the engineer, who is likely to be using plastics, with sufficient understanding of the properties of polymers and composites so that they can effectively design components that will be used in industry. The book also includes chapters on composites, case studies, and environmental issues. Finally, this resource provides a simple method of polymer identification that the engineer can use as a first analysis of a material."--Publisher's description.
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Essentials of Polymer Science and Engineering written by Paul C. Painter and published by DEStech Publications, Inc. This book was released on 2009 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Written by two of the best-known scientists in the field, Paul C. Painter and Michael M. Coleman, this unique text helps students, as well as professionals in industry, understand the science, and appreciate the history, of polymers. Composed in a witty and accessible style, the book presents a comprehensive account of polymer chemistry and related engineering concepts, highly illustrated with worked problems and hundreds of clearly explained formulas. In contrast to other books, 'Essentials' adds historical information about polymer science and scientists and shows how laboratory discoveries led to the development of modern plastics."--DEStech Publications web-site.
Download or read book Science and Technology of Polymer Nanofibers written by Anthony L. Andrady and published by John Wiley & Sons. This book was released on 2008-03-14 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover new and emerging applications of polymer nanofibers alongside the basic underlying science and technology. With discussions exploring such practical applications as filters, fabrics, sensors, catalysts, scaffolding, drug delivery, and wound dressings, the book provides polymer scientists and engineers with a comprehensive, practical "how-to" reference. Moreover, the author offers an expert assessment of polymer nanofibers' near-term potential for commercialization. Among the highlights of coverage is the book's presentation of the science and technology of electrospinning, including practical information on how to electrospin different polymer systems.
Download or read book Polymer Science written by Sebastião V. Canevarolo Jr. and published by . This book was released on 2019-11-11 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introductory textbook on polymer science aimed at lecturers/professors, undergraduate and graduate students of polymer science and technology courses as well as engineering (materials, chemical, civil, food, etc.), chemistry, and physics. It is also aimed at engineers and technologists. Each chapter is written starting from simple concepts and progressively getting more complex towards its end, to help the reader decide how deep to go into each topic. Each chapter also presents the solution of many proposed problems, guiding the reader to solve numerically the everyday problems polymer technologists face, by applying theoretical concepts. Additionally, at every chapter's end there is a list of problems for the reader to check his/her understanding of the topics. The book contains a list of more than 10 experiments to perform in the laboratory, linked to some of the concepts discussed in the book. It also serves as a long-term reference with many figures, diagrams, tables, chemical equations containing frequently needed information. It contains as well an appendix with a long list of chemical structures of the main commercially available polymers.
Download or read book Polymer Science and Engineering written by Committee on Polymer Science and Engineering and published by National Academies Press. This book was released on 1994-01-15 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymers--plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatings--and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Polymer Science and Technology written by Joel R. Fried and published by Pearson Education. This book was released on 2014 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes how plastics, rubber, and fibers are synthesized, processed into useful materials, characterized, and compounded with fillers and other additives to improve performance for specific applications. Their use in a wide variety of technologies including membrane separations, electronics, and energy production and storage is described. A new chapter in the Third Edition shows how computer correlations and simulations can be used to predict properties of new plastics and to better understand how existing plastics perform.
Download or read book Applied Polymer Science 21st Century written by C. Craver and published by Elsevier. This book was released on 2000-12-19 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 75th Anniversary Celebration of the Division of Polymeric Materials: Science and Engineering of the American Chemical Society, in 1999 sparked this third edition of Applied Polymer Science with emphasis on the developments of the last few years and a serious look at the challenges and expectations of the 21st Century. This book is divided into six sections, each with an Associate Editor responsible for the contents with the group of Associate Editors acting as a board to interweave and interconnect various topics and to insure complete coverage. These areas represent both traditional areas and emerging areas, but always with coverage that is timely. The areas and associated chapters represent vistas where PMSE and its members have made and are continuing to make vital contributions. The authors are leaders in their fields and have graciously donated their efforts to encourage the scientists of the next 75 years to further contribute to the well being of the society in which we all live. Synthesis, characterization, and application are three of the legs that hold up a steady table. The fourth is creativity. Each of the three strong legs are present in this book with creativity present as the authors were asked to look forward in predicting areas in need of work and potential applications. The book begins with an introductory history chapter introducing readers to PMSE. The second chapter introduces the very basic science, terms and concepts critical to polymer science and technology. Sections two, three and four focus on application areas emphasizing emerging trends and applications. Section five emphasizes the essential areas of characterization. Section six contains chapters focusing of the synthesis of the materials.
Download or read book The Elements of Polymer Science and Engineering written by Alfred Rudin and published by Academic Press. This book was released on 2012-12-31 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Elements of Polymer Science and Engineering, Third Edition, is a textbook for one- or two-semester introductory courses in polymer science and engineering taught primarily to senior undergraduate and first-year graduate students in a variety of disciplines, but primarily chemical engineering and materials science. Since the publication of the second edition in 1999, the field of polymers has advanced considerably. A key feature of this new edition is the inclusion of new concepts such as polymer nanocomposites and metallocene catalysts in existing chapters as well as new chapters covering selected contemporary topics such as behavior of natural polymers, polymer dynamics, and diffusion in polymers. This book has been completely reorganized to become more aligned with how instructors currently teach the course. There are now several enhancements to the book’s pedagogy, including the addition of numerous worked examples and new figures to better illustrate key concepts and the addition of a large number of end-of-chapter exercises, many of which are based on recently published research and relevant industrial data. This third edition will appeal to advanced undergraduate and graduate students in the physics, chemistry, and chemical engineering departments who are taking courses related to polymer science and engineering, as well as engineers new to the field of polymers. Focuses on applications of polymer chemistry, engineering, and technology Explains terminology, applications, and versatility of synthetic polymers Connects polymerization chemistry with engineering applications Contains practical lead-ins to emulsion polymerization, viscoelasticity, and polymer rheology
Download or read book Polymer Science and Technology written by Robert O. Ebewele and published by CRC Press. This book was released on 2000-03-23 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your search for the perfect polymers textbook ends here - with Polymer Science and Technology. By incorporating an innovative approach and consolidating in one volume the fundamentals currently covered piecemeal in several books, this efficient text simplifies the learning of polymer science. The book is divided into three main sections: po
Download or read book Fundamentals of Polymer Engineering Third Edition written by Anil Kumar and published by CRC Press. This book was released on 2018-12-07 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring the chemistry of synthesis, mechanisms of polymerization, reaction engineering of step-growth and chain-growth polymerization, polymer characterization, thermodynamics and structural, mechanical, thermal and transport behavior of polymers as melts, solutions and solids, Fundamentals of Polymer Engineering, Third Edition covers essential concepts and breakthroughs in reactor design and polymer production and processing. It contains modern theories and real-world examples for a clear understanding of polymer function and development. This fully updated edition addresses new materials, applications, processing techniques, and interpretations of data in the field of polymer science. It discusses the conversion of biomass and coal to plastics and fuels, the use of porous polymers and membranes for water purification, and the use of polymeric membranes in fuel cells. Recent developments are brought to light in detail, and there are new sections on the improvement of barrier properties of polymers, constitutive equations for polymer melts, additive manufacturing and polymer recycling. This textbook is aimed at senior undergraduate students and first year graduate students in polymer engineering and science courses, as well as professional engineers, scientists, and chemists. Examples and problems are included at the end of each chapter for concept reinforcement.
Download or read book The Elements of Polymer Science and Engineering written by Alfred Rudin and published by Elsevier. This book was released on 2012-12-02 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text is intended as the basis for a two or three semester course in synthetic macromolecules. It can also serve as a self-instruction guide for engineers and scientists without formal training in the subject who find themselves working with polymers. For this reason, the material covered begins with basic concepts and proceeds to current practice, where appropriate. Serves as both a textbook and an introduction for scientists in the field Problems accompany each chapter
Download or read book Macromolecular Engineering written by Alex Lubnin and published by Elsevier. This book was released on 2021-02-26 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macromolecular Engineering: Design, Synthesis and Application of Polymers explores the role of macromolecular engineering in the development of polymer systems with engineered structures that offer the desired combination of properties for advanced applications. This book is organized into sections covering theory and principles, science and technology, architectures and technologies, and applications, with an emphasis on the latest advances in techniques, materials, properties, and end uses - and including recently commercialized, or soon to be commercialized, designed polymer systems. The chapters are contributed by a group of leading figures who are actively researching in the field. This is an invaluable resource for researchers and scientists interested in polymer synthesis and design, across the fields of polymer chemistry, polymer science, plastics engineering, and materials science and engineering. In industry, this book supports engineers, R&D, and scientists working on polymer design for application areas such as biomedical and healthcare, automotive and aerospace, construction and consumer goods. Presents the theory, principles, architectures, technologies, and latest advances in macromolecular engineering for polymer design and synthesis Explains polymer design for cutting-edge applications areas, including coatings, automotive, industrial, household and medical uses Approaches several novel materials, such as polyisobutylene (PIB), polyamide-based polyurethanes, and aliphatic polyesters
Download or read book Experimental Methods in Polymer Science written by Toyoichi Tanaka and published by Elsevier. This book was released on 2012-12-02 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successful characterization of polymer systems is one of the most important objectives of today's experimental research of polymers. Considering the tremendous scientific, technological, and economic importance of polymeric materials, not only for today's applications but for the industry of the 21st century, it is impossible to overestimate the usefulness of experimental techniques in this field. Since the chemical, pharmaceutical, medical, and agricultural industries, as well as many others, depend on this progress to an enormous degree, it is critical to be as efficient, precise, and cost-effective in our empirical understanding of the performance of polymer systems as possible. This presupposes our proficiency with, and understanding of, the most widely used experimental methods and techniques.This book is designed to fulfill the requirements of scientists and engineers who wish to be able to carry out experimental research in polymers using modern methods. Each chapter describes the principle of the respective method, as well as the detailed procedures of experiments with examples of actual applications. Thus, readers will be able to apply the concepts as described in the book to their own experiments. Addresses the most important practical techniques for experimental research in the growing field of polymer science The first well-documented presentation of the experimental methods in one consolidated source Covers principles, practical techniques, and actual examples Can be used as a handbook or lab manual for both students and researchers Presents ideas and methods from an international perspective Techniques addressed in this volume include: Light Scattering Neutron Scattering and X-Ray Scattering Fluorescence Spectroscopy NMR on Polymers Rheology Gel Experiments
Download or read book Polymer Science and Technology written by Joel R. Fried and published by . This book was released on 1995 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cellulose Science and Technology written by Jean-Luc Wertz and published by EPFL Press. This book was released on 2010-06-21 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: An ideal reference for scientists in natural and synthetic polymer research, this book applies basic biology as well as polymer and sugar chemistry to the study of cellulose, and it provides key requirements for understanding this complex science.
