Download or read book Polymer Brush Patterning Using Self assembled Microsphere Monolayers as Microcontact Printing Stamps written by Tao Chen and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Combinatorial Methods for Chemical and Biological Sensors written by Radislav A. Potyrailo and published by Springer Science & Business Media. This book was released on 2009-03-21 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical sensors are in high demand for applications as varied as water pollution detection, medical diagnostics, and battlefield air analysis. Designing the next generation of sensors requires an interdisciplinary approach. The book provides a critical analysis of new opportunities in sensor materials research that have been opened up with the use of combinatorial and high-throughput technologies, with emphasis on experimental techniques. For a view of component selection with a more computational perspective, readers may refer to the complementary volume of Integrated Analytical Systems edited by M. Ryan et al., entitled “Computational Methods for Sensor Material Selection”.

Download or read book Core Concepts in Supramolecular Chemistry and Nanochemistry written by Jonathan W. Steed and published by John Wiley & Sons. This book was released on 2007-04-30 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supramolecular chemistry and nanochemistry are two strongly interrelated cutting edge frontiers in research in the chemical sciences. The results of recent work in the area are now an increasing part of modern degree courses and hugely important to researchers. Core Concepts in Supramolecular Chemistry and Nanochemistry clearly outlines the fundamentals that underlie supramolecular chemistry and nanochemistry and takes an umbrella view of the whole area. This concise textbook traces the fascinating modern practice of the chemistry of the non-covalent bond from its fundamental origins through to it expression in the emergence of nanochemistry. Fusing synthetic materials and supramolecular chemistry with crystal engineering and the emerging principles of nanotechnology, the book is an ideal introduction to current chemical thought for researchers and a superb resource for students entering these exciting areas for the first time. The book builds from first principles rather than adopting a review style and includes key references to guide the reader through influential work. supplementary website featuring powerpoint slides of the figures in the book further references in each chapter builds from first principles rather than adopting a review style includes chapter on nanochemistry clear diagrams to highlight basic principles

Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.

Download or read book Cell based Biosensors written by Qingjun Liu and published by Artech House. This book was released on 2009-10 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by recognized experts the field, this leading-edge resource is the first book to systematically introduce the concept, technology, and development of cell-based biosensors. You find details on the latest cell-based biosensor models and novel micro-structure biosensor techniques. Taking an interdisciplinary approach, this unique volume presents the latest innovative applications of cell-based biosensors in a variety of biomedical fields. The book also explores future trends of cell-based biosensors, including integrated chips, nanotechnology and microfluidics. Over 140 illustrations help clarify key topics throughout the book.

Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.

Download or read book Cyclodextrin Chemistry written by M. L. Bender and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry was at one time completely described in terms of collision theo ry, in which one molecule collided with another, sometimes producing reac tion. Then came the realization that enzymes which are highly efficient ca talysts, work by way of prior complexation, often stereospecific, which is then followed by chemical reaction. Thus, systems that exhibit "host-guest" relationships, i.e., that show complexing are being looked at an ever in creasing frequency. The cyclodextrins are the first and probably the most important example of compounds that exhibits complex formation. This is a book about the cyclodextrins. There are of course other compounds that exhibit "host-guest" relationships and thus bind other organic molecules, but so far they have not achieved the importance of the cyclodextrins. By their name it is obvious that cyclodextrins are cyclic compounds. The complexes that they form are therefore cyclic inclusion complexes. Because the complexes are cyclic in nature, complexation can be very strong, as op posed to 1t-complex, electrostatic, or apolar complexes in which complex formation is two-dimensional rather than three-dimensional. Cyclodextrins turn out to be excellent models of enzymes. This is proba bly not fortuitous because they were first sought since it was discovered that the principal binding in the enzyme chymotrypsin was a cyclic inclusion complex. Cyclodextrins can do more than form cyclic inclusion complexes, they can catalyze as well. But catalysis always occurs after complex formation.

Download or read book BioMEMS and Biomedical Nanotechnology written by Mihrimah Ozkan and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions reporting on fundamental and applied investigations of the material science, biochemistry, and physics of biomedical microdevices with applications to Genomics and Proteomics. Topics include gene expression profiling utilizing microarray technology; imaging and sensing for gene detection and use in DNA analysis; and coverage of advanced microfluidic devices and the Humane Genome Project.

Download or read book Azo Polymers written by Xiaogong Wang and published by Springer. This book was released on 2016-10-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores functional polymers containing aromatic azo chromophores in side-chain, main-chain and other parts of their structures, known as azo polymers and which share common photoresponsive properties. It focuses on the molecular architecture of azo polymers, the synthetic methods and their most important functions, such as photoinduced birefringence and dichroism, surface-relief-grating (SRG) formation, and light-driven deformation of liquid crystal elastomers. It combines a general survey of the subject and in-depth discussions of each topic, including numerous illustrations, figures, and photographs. Offering a balance between an introduction to the core concepts and a snapshot of hot and emerging topics, it is of interest to graduate students and researchers working in this and related fields. Xiaogong Wang is a Professor at the Department of Chemical Engineering, Tsinghua University, China.

Download or read book Cellulose Chemistry and Properties Fibers Nanocelluloses and Advanced Materials written by Orlando J. Rojas and published by Springer. This book was released on 2016-02-25 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vincent Bulone et al.: Cellulose sources and new understanding of synthesis in plants Thomas Heinze et al.:Cellulose structure and properties Thomas Rosenau, Antje Potthast, Ute Henniges et al.: Recent developments in cellulose aging (degradation / yellowing / chromophore formation) Sunkyu Park et al.:Cellulose crystallinity Lina Zhang et al.:Gelation and dissolution behavior of cellulose Yoshiyuki Nishio et al.:Cellulose and derivatives in liquid crystals Alessandro Gandini, Naceur Belgacem et al.:The surface and in-depth modification of cellulose fibers Emily D. Cranston et al.:Interfacial properties of cellulose Herbert Sixta, Michael Hummel et al.Cellulose Fibers Regenerated from Cellulose Solutions in Ionic Liquids Qi Zhou et al.:Cellulose-based biocomposites Orlando Rojas et al.:Films of cellulose nanocrystals and nanofibrils Pedro Fardim et al.:Functional cellulose particles Wadood Hamad et al.:Cellulose Composites

Download or read book Bioactive Surfaces written by Hans G. Börner and published by Springer. This book was released on 2013-08-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erik Wischerhoff, Nezha Badi, André Laschewsky and Jean-François Lutz Smart Polymer Surfaces: Concepts and Applications in Biosciences; S. Petersen, M. Gattermayer and M. Biesalski Hold on at the Right Spot: Bioactive Surfaces for the Design of Live-Cell Micropatterns; Julien Polleux Interfacing Cell Surface Receptors to Hybrid Nanopatterned Surfaces: A Molecular Approach for Dissecting the Adhesion Machinery; Abigail Pulsipher and Muhammad N. Yousaf Self-Assembled Monolayers as Dynamic Model Substrates for Cell Biology; D. Volodkin, A. Skirtach and H. Möhwald LbL Films as Reservoirs for Bioactive Molecules; R. Gentsch and H. G. Börner Designing Three-Dimensional Materials at the Interface to Biology; Joerg C. Tiller Antimicrobial Surfaces;

Download or read book Nano and Microfabrication for Industrial and Biomedical Applications written by Regina Luttge and published by William Andrew. This book was released on 2016-06-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano- and Microfabrication for Industrial and Biomedical Applications, Second Edition, focuses on the industrial perspective on micro- and nanofabrication methods, including large-scale manufacturing, the transfer of concepts from lab to factory, process tolerance, yield, robustness, and cost. The book gives a history of miniaturization and micro- and nanofabrication, and surveys industrial fields of application, illustrating fabrication processes of relevant micro and nano devices. In this second edition, a new focus area is nanoengineering as an important driver for the rise of novel applications by integrating bio-nanofabrication into microsystems. In addition, new material covers lithographic mould fabrication for soft-lithography, nanolithography techniques, corner lithography, advances in nanosensing, and the developing field of advanced functional materials. Luttge also explores the view that micro- and nanofabrication will be the key driver for a "tech-revolution" in biology and medical research that includes a new case study that covers the developing organ-on-chip concept. - Presents an interdisciplinary approach that makes micro/nanofabrication accessible equally to engineers and those with a life science background, both in academic settings and commercial R&D - Provides readers with guidelines for assessing the commercial potential of any new technology based on micro/nanofabrication, thus reducing the investment risk - Updated edition presents nanoengineering as an important driver for the rise of novel applications by integrating bio-nanofabrication into microsystems

Download or read book Implantable Sensors and Systems written by Guang-Zhong Yang and published by Springer. This book was released on 2018-03-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implantable sensing, whether used for transient or long-term monitoring of in vivo physiological, bio-electrical, bio-chemical and metabolic changes, is a rapidly advancing field of research and development. Underpinned by increasingly small, smart and energy efficient designs, they become an integral part of surgical prostheses or implants for both acute and chronic conditions, supporting optimised, context aware sensing, feedback, or stimulation with due consideration of system level impact. From sensor design, fabrication, on-node processing with application specific integrated circuits, to power optimisation, wireless data paths and security, this book provides a detailed explanation of both the theories and practical considerations of developing novel implantable sensors. Other topics covered by the book include sensor embodiment and flexible electronics, implantable optical sensors and power harvesting. Implantable Sensors and Systems – from Theory to Practice is an important reference for those working in the field of medical devices. The structure of the book is carefully prepared so that it can also be used as an introductory reference for those about to enter into this exciting research and developing field.

Download or read book Microfabrication for Industrial Applications written by Regina Luttge and published by William Andrew. This book was released on 2011-09-14 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfabrication for Industrial Applications focuses on the industrial perspective for micro- and nanofabrication methods including large-scale manufacturing, transfer of concepts from lab to factory, process tolerance, yield, robustness, and cost. It gives a history of miniaturization, micro- and nanofabrication, and surveys industrial fields of application, illustrating fabrication processes of relevant micro and nano devices. Concerning sub-micron feature manufacture, the book explains: the philosophy of micro/ nanofabrication for integrated circuit industry; thin film deposition; (waveguide, plastic, semiconductor) material processing; packaging; interconnects; stress (e.g., thin film residual); economic; and environmental aspects. Micro/nanomechanical sensors and actuators are explained in depth with information on applications, materials (incl. functional polymers), methods, testing, fabrication, integration, reliability, magnetic microstructures, etc. Shows engineers & students how to evaluate the potential value of current and nearfuture manufacturing processes for miniaturized systems in industrial environments Explains the top-down and bottom up approaches to nanotechnology, nanostructures fabricated with beams, nano imprinting methods, nanoparticle manufacturing (and their health aspects), nanofeature analysis, and connecting nano to micro to macro Discusses issues for practical application cases; possibilities of dimension precision; large volume manufacturing of micro- & nanostructures (machines, materials, costs) Explains applications of Microsystems for information technology, e.g.: data recording (camera, microphone), storage (memories, CDs), communication; computing; and displays (beamers, LCD, TFT) Case studies are given for sensors, resonators, probes, transdermal medical systems, micro- pumps & valves, inkjets, DNA-analysis, lab-on-a-chip, & micro-cooling

Download or read book Colloidal Particles at Liquid Interfaces written by Bernard P. Binks and published by Cambridge University Press. This book was released on 2006-08-17 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The understanding of how small solid particles operate at liquid interfaces is minimal. This book brings together the topics actively being investigated, with contributions from experts in the field. It will be of interest to researchers in chemistry, physics, chemical engineering, pharmacy, food science and materials science.

Download or read book Nanotechnology and Tissue Engineering written by Cato T. Laurencin and published by CRC Press. This book was released on 2008-06-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication gives us the ability to mimic biological structures with molecular level precision. Offering a natural progression of topics, Nanotechnology and Tissue Engineering: The Scaffold provides a state-of-the-art account of groundbreaking research in this rapidly emerging area of biomedical engineering. Emphasizing the importance of scaffolds, the book details fundamental and advanced aspects of nanofabrication and examines cellular interactions at the nanoscale level. It reviews extracellular matrix structure and function and discusses various nanoscale biological surface modifications that can improve cellular responses. The editors present the most promising nanofabrication techniques, including electrospinning, lithography, and self assembly. Featuring the contributions of pioneering scientists writing about their own research, this cutting-edge volume — Provides background information discussing the emerging importance of scaffolds in tissue engineering Examines tissue engineering as it relates to orthopedic, cardiovascular, neural, and musculoskeletal applications Details cell responses to a number of nanoscale features Delves into microfabrication techniques in scaffold development Presents research on designer self-assembling peptide scaffolds This highly comprehensive resource also discusses clinical implications and applications, presenting exciting breakthroughs in neural, vascular, and musculoskeletal tissue engineering with nanostructures. An essential resource, for biomedical engineers working on the frontiers of tissue research, this book brings together current findings and background information on a complete range of engineering processes that have led to the development of a number of highly useful tissues.

Download or read book Materials and Processes for Next Generation Lithography written by and published by Elsevier. This book was released on 2016-11-08 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the requirements of the semiconductor industry have become more demanding in terms of resolution and speed it has been necessary to push photoresist materials far beyond the capabilities previously envisioned. Currently there is significant worldwide research effort in to so called Next Generation Lithography techniques such as EUV lithography and multibeam electron beam lithography. These developments in both the industrial and the academic lithography arenas have led to the proliferation of numerous novel approaches to resist chemistry and ingenious extensions of traditional photopolymers. Currently most texts in this area focus on either lithography with perhaps one or two chapters on resists, or on traditional resist materials with relatively little consideration of new approaches. This book therefore aims to bring together the worlds foremost resist development scientists from the various community to produce in one place a definitive description of the many approaches to lithography fabrication. - Assembles up-to-date information from the world's premier resist chemists and technique development lithographers on the properties and capabilities of the wide range of resist materials currently under investigation - Includes information on processing and metrology techniques - Brings together multiple approaches to litho pattern recording from academia and industry in one place