Download or read book Broadband Dielectric Spectroscopy written by Friedrich Kremer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both an introductory course to broadband dielectric spectroscopy and a monograph describing recent dielectric contributions to current topics, this book is the first to cover the topic and has been hotly awaited by the scientific community.
Download or read book Antifouling Paint Biocides written by Ioannis K. Konstantinou and published by Springer Science & Business Media. This book was released on 2006-02-22 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contamination of the aquatic environment by antifouling compounds has been a topic of increasing importance during the last few years. This book describes advances in antifouling paint biocides, and provides thorough evaluation of research and information on occurrence and levels, environmental fate, analytical techniques and methods for the monitoring and control, environmental modeling, ecotoxicological effects and risk assessment placing emphasis on the knowledge acquired over the last decade.
Download or read book Physics of Surfaces and Interfaces written by Harald Ibach and published by Springer Science & Business Media. This book was released on 2006-11-18 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. It is designed as a handbook for the researcher as well as a study-text for graduate students. Written explanations are supported by 350 graphs and illustrations.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1984 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Characterization written by Nicholas P. Cheremisinoff and published by Univ. Press of Mississippi. This book was released on 1996-12-31 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of polymer characterization test methods. The methods and instrumentation described represent modern analytical techniques useful to researchers, product development specialists, and quality control experts in polymer synthesis and manufacturing. Engineers, polymer scientists and technicians will find this volume useful in selecting approaches and techniques applicable to characterizing molecular, compositional, rheological, and thermodynamic properties of elastomers and plastics.
Download or read book Biodegradable Poly Lactic Acid written by Jie Ren and published by Springer Science & Business Media. This book was released on 2011-04-05 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Biodegradable Poly (Lactic Acid): Synthesis, Modification, Processing and Applications" describes the preparation, modification, processing, and the research and applications of biodegradable poly (lactic acid), which belong to the biomedical and environment-friendly materials. Highly illustrated, the book introduces systematically the synthesis, physical and chemical modifications, and the latest developments of research and applications of poly (lactic acid) in biomedical materials. The book is intended for researchers and graduate students in the fields of materials science and engineering, polymer science and engineering, biomedicine, chemistry, environmental sciences, textile science and engineering, package materials, and so on. Dr. Jie Ren is a professor at the Institute of Nano and Bio-Polymeric Materials, School of Material Science and Engineering, Tongji University, Shanghai, China.
Download or read book Functional Polymers by Post Polymerization Modification written by Patrick Theato and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern polymer science a variety of polymerization methods for the direct synthesis of polymers bearing functional groups are known. However, there is still a large number of functional groups that may either completely prevent polymerization or lead to side reactions. Post-polymerization modification, also known as polymer-analogous modification, is an alternative approach to overcome these limitations. It is based on the polymerization of monomers with functional groups that are inert towards the polymerization conditions but allow a quantitative conversion in a subsequent reaction step yielding a broad range of other functional groups. Thus, diverse libraries of functional polymers with identical average degrees of polymerization but variable side chain functionality may easily be generated. Filling the gap for a book dealing with synthetic strategies and recent developments, this volume provides a comprehensive and up-to-date overview of the field of post-polymerization modification. As such, the international team of expert authors covers a wide range of topics, including new synthetic techniques utilizing different reactive groups for post-polymerization modifications with examples ranging from modification of biomimetic and biological polymers to modification of surfaces. With its guidelines this is an indispensable and interdisciplinary reference for scientists working in both academic and industrial polymer research.
Download or read book Polymer Composites Macro and Microcomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2012-04-30 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first systematic reference on the topic with an emphasis on the characteristics and dimension of the reinforcement. This first of three volumes, authored by leading researchers in the field from academia, government, industry, as well as private research institutions around the globe, focuses on macro and micro composites. Clearly divided into three sections, the first offers an introduction to polymer composites, discussing the state of the art, new challenges, and opportunities of various polymer composite systems, as well as preparation and manufacturing techniques. The second part looks at macro systems, with an emphasis on fiber reinforced polymer composites, textile composites, and polymer hybrid composites. Likewise, the final section deals with micro systems, including micro particle reinforced polymer composites, the synthesis, surface modification and characterization of micro particulate fillers and flakes as well as filled polymer micro composites, plus applications and the recovery, recycling and life cycle analysis of synthetic polymeric composites.
Download or read book The Commercial Storage of Fruits Vegetables and Florist and Nursery Stocks written by Robert E. Hardenburg and published by . This book was released on 1986 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Note for the electronic edition: This draft has been assembled from information prepared by authors from around the world. It has been submitted for editing and production by the USDA Agricultural Research Service Information Staff and should be cited as an electronic draft of a forthcoming publication. Because the 1986 edition is out of print, because we have added much new and updated information, and because the time to publication for so massive a project is still many months away, we are making this draft widely available for comment from industry stakeholders, as well as university research, teaching and extension staff.
Download or read book Sticky Cotton written by Eric F. Hequet and published by Texas Tech University Press. This book was released on 2006 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential reference for anyone searching for ways to avoid or mitigate the problem of cotton stickiness.
Download or read book Thermoplastic Starch written by Leon Janssen and published by John Wiley & Sons. This book was released on 2009-09-03 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on this new green material collates all the information hitherto scattered in journal articles and on websites, thus meeting the application-oriented needs of the reader. The contents stretch between many important areas, such as production and applications of biopolymeric material, fundamental knowledge and practical applications, and includes valuable experimental case studies, which can be directly used in industrial practice. All the data satisfies EU environmental regulations, which are the most stringent worldwide.
Download or read book The Cereal Rusts Origins specificity structure and physiology written by William Rodgers Bushnell and published by . This book was released on 1984 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Origins, specificity, structure, and physiology; Evolution at the center of origin; Taxonomy of the cereal rust fungi; Specificity; The formae speciales; Race specificity and methods of study; Genetics of the pathogen: host association; Histology and molecular biology of host: parasite; Virulence frequency dynamics of cereal rust fungi; The rust fungus; Controlled infection by Puccinia graminis f.sp. tritici under artificial conditions; Developmental ultrastructure of hyphae and spores; Development and physical of teliospores; Obligate parasitism and axenic culture; The host parsite interface; The rusted host; Effects of rust on plant development in relation to the translocation of inorganic and organic solutes.
Download or read book Handbook of Brewing written by Hans Michael Eßlinger and published by John Wiley & Sons. This book was released on 2009-04-22 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference combines the technological know-how from five centuries of industrial-scale brewing to meet the needs of a global economy. The editor and authors draw on the expertise gained in the world's most competitive beer market (Germany), where many of the current technologies were first introduced. Following a look at the history of beer brewing, the book goes on to discuss raw materials, fermentation, maturation and storage, filtration and stabilization, special production methods and beermix beverages. Further chapters investigate the properties and quality of beer, flavor stability, analysis and quality control, microbiology and certification, as well as physiology and toxicology. Such modern aspects as automation, energy and environmental protection are also considered. Regional processes and specialties are addressed throughout the entire book, making this a truly global resource on brewing.
Download or read book The Mechanisms of Pyrolysis Oxidation and Burning of Organic Materials written by Leo Aloysius Wall and published by . This book was released on 1972 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Self healing Materials written by Swapan Kumar Ghosh and published by John Wiley & Sons. This book was released on 2009-08-04 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers self-healing concepts for all important material classes and their applications: polymers, ceramics, non-metallic and metallic coatings, alloys, nanocomposites, concretes and cements, as well as ionomers. Beginning with the inspiration from biological self-healing, its mimickry and conceptual transfer into approaches for the self-repair of artificially created materials, this book explains the strategies and mechanisms for the readers' basic understanding, then covers the different material classes and suitable self-healing concepts, giving examples for their application in practical situations. As the first book in this swiftly growing research field, it is of great interest to readers from many scientific and engineering disciplines, such as physics and chemistry, civil, architectural, mechanical, electronics and aerospace engineering.
Download or read book Fundamentals of Semiconductors written by Peter YU and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excellent bridge between general solid-state physics textbook and research articles packed with providing detailed explanations of the electronic, vibrational, transport, and optical properties of semiconductors "The most striking feature of the book is its modern outlook ... provides a wonderful foundation. The most wonderful feature is its efficient style of exposition ... an excellent book." Physics Today "Presents the theoretical derivations carefully and in detail and gives thorough discussions of the experimental results it presents. This makes it an excellent textbook both for learners and for more experienced researchers wishing to check facts. I have enjoyed reading it and strongly recommend it as a text for anyone working with semiconductors ... I know of no better text ... I am sure most semiconductor physicists will find this book useful and I recommend it to them." Contemporary Physics Offers much new material: an extensive appendix about the important and by now well-established, deep center known as the DX center, additional problems and the solutions to over fifty of the problems at the end of the various chapters.
Download or read book Book Preservation Technologies written by and published by . This book was released on 1988 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
