Download or read book Polyethylene Film Extrusion written by B. H Gregory and published by Trafford Publishing. This book was released on 2009-11 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised version of this book is now available.The polyethylene industry has been in the midst of major restructuring and rationalization. This has lead to joint ventures and alliances to combine technologies and exploit opportunities to maximize improvements in process productivity, catalyst innovations, and enhancements in extrusion technology and converting. This comprehensive study of the polyethylene film extrusion process describes this technology in detail. In depth descriptions of the manufacturing processes for polyethylene homopolymers and copolymers, including metallocenes, are reviewed. All aspects of machine design with particular emphasis on screws and dies including coextrusion are discussed comprehensively. With computer modeling, the interactions between equipment and polymer are quantified. All aspects of equipment design and polymer features that control melt fracture, interfacial instabilities, gauge control, output and temperature, and cooling of blown and cast film processes are presented quantitatively. This methodology will highlight solutions in troubleshooting for optimum design and operation and the best available polymer and formulation choices. All polyethylene film applications in packaging, agriculture, lamination, and construction, consumer, industrial, and health care are reviewed and discussed in depth.

Download or read book Polyethylene Film Extrusion written by B. H. Gregory and published by Trafford Publishing. This book was released on 2009-12-15 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised version of this book is now available. The polyethylene industry has been in the midst of major restructuring and rationalization. This has lead to joint ventures and alliances to combine technologies and exploit opportunities to maximize improvements in process productivity, catalyst innovations, and enhancements in extrusion technology and converting. This comprehensive study of the polyethylene film extrusion process describes this technology in detail. In depth descriptions of the manufacturing processes for polyethylene homopolymers and copolymers, including metallocenes, are reviewed. All aspects of machine design with particular emphasis on screws and dies including coextrusion are discussed comprehensively. With computer modeling, the interactions between equipment and polymer are quantified. All aspects of equipment design and polymer features that control melt fracture, interfacial instabilities, gauge control, output and temperature, and cooling of blown and cast film processes are presented quantitatively. This methodology will highlight solutions in troubleshooting for optimum design and operation and the best available polymer and formulation choices. All polyethylene film applications in packaging, agriculture, lamination, and construction, consumer, industrial, and health care are reviewed and discussed in depth.

Download or read book Blown Film Extrusion written by Kirk Cantor and published by . This book was released on 2018 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: "From hardware and materials through processing and properties, a broad coverage of blown film extrusion is presented. A primary objective of this book is to ensure a useful balance of theory and practice. The reader will find the answers to why they encounter certain effects in the blown film process so that they are better able to troubleshoot and improve their operations. At the same time, current practices and equipment are emphasized to keep readers up-to-date with the most productive and efficient technology. The companion computer-based learning tool, The Blown Film Extrusion Simulator, is provided to enhance the reader's understanding. This software was developed specifically to teach blown film extrusion equipment operation and processing principles, and is available for download. Throughout this book, exercises using the simulator are described to complement the methods and principles explained. New in this third edition is a chapter on polymer rheology, with an overview of the rheology of polymer melts and its effect on extruding blown film. Additionally, improvements and corrections have been made throughout the book. Contents: Materials for Blown Film Polymer Rheology Extrusion Overview Hardware for Blown Film Processing Coextrusion Film Properties Troubleshooting"--

Download or read book Practical Guide to Polyethylene written by Cornelia Vasile and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide begins with general background to the polyethylene family, with price, production and market share information. It describes the basic types of polyethylene including virgin and filled polyethylene, copolymers, block and graft polymers and composites, and reviews the types of additives used in polyethylene. It gives the low down on the properties, including, amongst others, rheological, mechanical, chemical, thermal, and electrical properties. It goes on to describe the processing issues and conditions for the wide range of techniques used for polyethylene, and also considers post-processing and assembly issues. It offers guidance on product design and development issues, including materials selection. It is an indispensable resource for everyone working with this material.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Download or read book Film Extrusion Manual Third Edition written by James F. Macnamara, Jr. and published by . This book was released on 2020-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-26 with total page 1671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.

Download or read book Multilayer Flexible Packaging written by John R. Wagner Jr. and published by William Andrew. This book was released on 2016-03-29 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multilayer Flexible Packaging, Second Edition, provides a thorough introduction to the manufacturing and applications of flexible plastic films, covering materials, hardware and processes, and multilayer film designs and applications. The book gives engineers and technicians a better understanding of the capability and limitations of multilayer flexible films and how to use them to make effective packaging. It includes contributions from world renowned experts and is fully updated to reflect the rapid advances made in the field since 2009, also including an entirely new chapter on the use of bio-based polymers in flexible packaging. The result is a practical, but detailed reference for polymeric flexible packaging professionals, including product developers, process engineers, and technical service representatives. The materials coverage includes detailed sections on polyethylene, polypropylene, and additives. The dies used to produce multilayer films are explored in the hardware section, and the process engineering of film manufacture is explained, with a particular focus on meeting specifications and targets. In addition, a new chapter has been added on regulations for food packaging – including both FDA and EU regulations. - Provides a complete introduction to multilayer flexible packaging, assisting plastics practitioners with the development, design, and manufacture of flexible packaging for food, cosmetics, pharmaceuticals, and more - Presents thorough, well-written, and up-to-date reviews of the current technology by experts in the field, making this an essential reference for any engineer or manager - Includes discussion and analysis of the latest rules and regulations governing food packaging

Download or read book Film Extrusion Manual written by Thomas I. Butler and published by Tappi. This book was released on 2005-01-01 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Plastic Films written by Elsayed M. Abdel-Bary and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic films are high-performance materials which play an essential part in modern life. The plastics films industry uses state-of-the-art manufacturing processes and is continuously seeking out new technologies to improve its performance. The understanding of the nature of plastic films, their production techniques, applications and their characterisation is essential for producing new types of plastic films. This handbook has been written to discuss the production and main uses of plastic films. Plastic films are high-performance materials which play an essential part in modern life. Plastic films are mostly used in packaging applications but as will be seen from this book they are also used in the agricultural, medical and engineering fields. The plastics films industry uses state-of-the-art manufacturing processes and is continuously seeking out new technologies to improve its performance. The understanding of the nature of plastic films, their production techniques, applications and their characterisation is essential for producing new types of plastic films. This handbook has been written to discuss the production and main uses of plastic films.

Download or read book Design of Extrusion Forming Tools written by Olga Carneiro and published by Smithers Rapra. This book was released on 2012-12-19 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of extrusion forming tools (dies and calibrators) is a difficult task usually performed by the employment of experimental trial-and-error procedures, which can hinder the performance and cost of the tools, may increase the time to market of new extruded products and limit their complexity.This book provides detailed information on the design of extrusion forming tools. It describes the main problems to be faced when designing dies and calibrators, the most relevant polymer properties to be considered in the design process, the specific problems related to several types of conventional extrusion dies, and recent developments on the design of special dies and process modeling. It is an updated and unique book on the subject, where each chapter is prepared by internationally recognized experts. Having in mind its nature, it is expected to become a useful reference book for higher education students (both undergraduate and graduate ones), teachers, researchers and engineers active in the extrusion industry.

Download or read book The Science and Technology of Flexible Packaging written by Barry A. Morris and published by William Andrew. This book was released on 2022-07-23 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Flexible Packaging: Multilayer Films from Resin and Process to End Use, Second Edition provides a comprehensive guide on plastic films in flexible packaging, covering scientific principles, materials properties, processes and end use considerations. Sections discuss the science of multilayer films in a concise and impactful way, presenting the fundamental understanding required to improve product design, material selection and processes. In addition, the book includes information on why one material is favored over another and how film or coating affects material properties. Descriptions and analysis of key properties of packaging films are provided from engineering and scientific perspectives. With essential scientific insights, best practice techniques, environmental sustainability information and key principles of structure design, this book provides information aids in material selection and processing, how to shorten development times and deliver stronger products, and ways to enable engineers and scientists to deliver superior products with reduced development time and cost. - Provides essential information on all aspects of multilayer films in flexible packaging, including processing, properties, materials and end use - Bridges the gap between scientific principles and practical challenges - Includes explanations to assist practitioners in overcoming challenges - Enables the reader to address new challenges, such as design for sustainability and eCommerce

Download or read book Handbook of Troubleshooting Plastics Processes written by John R. Wagner, Jr. and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a framework for understanding how to characterize plastic manufacturing processes for use in troubleshooting problems. The 21 chapters are authored by well-known and experienced engineers who have specialized knowledge about the processes covered in this practical guide. From the Preface: “In every chapter, the process is described and the most common problems are discussed along with the root causes and potential technical solutions. Numerous case studies are provided that illustrate the troubleshooting process. Mark A. Spalding, The Dow Chemical Company

Download or read book Manufacturing and Novel Applications of Multilayer Polymer Films written by Deepak Langhe and published by William Andrew. This book was released on 2016-01-04 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Novel Applications of Multilayer Polymer Films discusses the advancements in multilayer technology, including its capability to produce hundreds of layers in a single film by a melt coextrusion process. These engineered films can have significantly enhanced performance properties, allowing films to be made thinner, stronger, and with better sealing properties. As recent developments in feedblocks and materials have opened up a range of new possibilities, this book discusses different feedblocks, and viscosity and material considerations. It is the first comprehensive summary of the latest technology in multilayer film processing and related applications, and is written from a practical perspective, translating research into commercial production and real world products. The book provides fundamental knowledge on microlayer coextrusion processing technology, how to fabricate such structures, structure and properties of such microlayers, and potential applications, thus helping research scientists and engineers develop products which not only fulfill their primary function, but can also be manufactured reliably, safely, and economically. - Provides a fundamental knowledge of microlayer coextrusion processing, including how to fabricate microlayer structures, the properties of microlayers, and potential applications, including optics, polymer film capacitors, and semiconductors - Includes an in-depth analysis of all technologies used for producing multilayered films and structures by coextrusion processing - Thoroughly assesses potential future trends in multilayer coextrusion technology, thus enabling engineers and scientists to stay ahead of the curve in this rapidly advancing area

Download or read book Plastic Films in Food Packaging written by Sina Ebnesajjad and published by William Andrew. This book was released on 2012-12-31 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The value of the groceries purchases in the USA is over $500 billion annually, most of which is accounted for by packaged foods. Plastic packaging of foods is not only ubiquitous in developed economies, but increasingly commonplace in the developing world, where plastic packaging is instrumental in decreasing the proportion of the food supply lost to spoilage. This new handbook is a combination of new material and updated chapters, chosen by Dr. Sina Ebnesajjad, from recently published books on this subject. Plastic Films in Food Packaging offers a practical handbook for engineers, scientists and managers working in the food packaging industry, providing a tailor-made package of science and engineering fundamentals, best practice techniques and guidance on new and emerging technologies. By covering materials, design, packaging processes, machinery and waste management together in one book, the authors enable the reader to take a lifecycle approach to food packaging. The Handbook addresses questions related to film grades, types of packages for different types of foods, packaging technologies, machinery and waste management. Additionally the book provides a review of new and emerging technologies. Two chapters cover the development of barrier films for food packaging and the regulatory and safety aspects of food packaging. - Essential information and practical guidance for engineers and scientists working at all stages of the food packaging lifecycle: from design through manufacture to recycling - Includes key published material on plastic films in food packaging, updated specifically for this Handbook, and new material on the regulatory framework and safety aspects - Coverage of materials and applications together in one handbook enables engineers and scientists to make informed design and manufacturing decisions

Download or read book Troubleshooting the Extrusion Process written by María del Pilar Noriega E. and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-10-07 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Troubleshooting extrusion problems is one of the most challenging tasks in extrusion operations, requiring a good understanding of the extrusion process and the material properties, good instrumentation, good analysis tools, and a systematic and logical approach. This book addresses all issues crucial in extrusion troubleshooting. Additionally, it includes industrial case studies, richly illustrated with photographs and photomicrographs, used to provide exemplary approaches to efficient problem analysis and problem solving. The interconnectivity between the different relevant knowledge areas such as materials engineering, processing technology, and product development is emphasized. This revised third edition comprises a very significant update, with a great deal of new content, especially focusing on additional case studies as well as new sections on collection and interpretation of extrusion process data, rotational rheometry, the smartphone, how screw design can affect extruder performance, melt temperature variation, recent research on automatic optimization of extruder barrel temperatures, process signal analysis using Fast Fourier Transform, among other topics.