Download or read book Polyelectrolyte brush bilayers under shear Theory and simulations 3rd edition written by Mike John Edwards and published by Mike John Edwards. This book was released on 2023-10-13 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of the book which contains ten chapters and it covers my research about polymer brush bilayers under shear. The chapter ten is devoted to polymer brush bilayers under non-equilibrium shear inversion which is very important in studying mammalian synovial joint behavior. In this chapter, it is revealed that the hydrodynamic interactions produce mechanical instabilities in the system while adding electrostatic interactions removes those mechanical instabilities.
Download or read book Polyelectrolyte brush bilayer under shear written by Mike John Edwards (Majid Farzin) and published by Mike John Edwards. This book was released on 2022-09-11 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present ebook covers the mathematical modeling and numerical simulations of polyelectrolyte brush bilayers under shear motion. The similar conditions could be found in mammalian knee joints. The new findings which is described in the last chapter shows that polymer brush bilayers are useful in lubrication exclusively in the presence of hydrodynamic interactions between monomers. This reveals the significance of interstitial water in knee joint.
Download or read book Polyelectrolyte brush bilayers written by Mike John Edwards and published by Mike John Edwards. This book was released on 2021-11-26 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive theoretical ebook in the field of soft matter and biological science. This Ebook contains most recent advances in theory and simulations of artificial knee joint.
Download or read book Polyelectrolytes written by Visakh P. M. and published by Springer. This book was released on 2014-09-03 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a valuable reference source to graduate and post graduate students, engineering students, research scholars polymer engineers from industry. The book provides the reader with current developments of theoretical models describing the thermodynamics polyelectrolytes as well as experimental findings. A particular emphasis is put on the rheological description of polyelectrolyte solutions and hydrogels.
Download or read book Introduction to Soft Matter written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to this exciting and relativelynew subject with chapters covering natural and synthetic polymers,colloids, surfactants and liquid crystals highlighting the many andvaried applications of these materials. Written by an expert in thefield, this book will be an essential reference for people workingin both industry and academia and will aid in understanding of thisincreasingly popular topic. Contains a new chapter on biological soft matter Newly edited and updated chapters including updated coverageof recent aspects of polymer science. Contain problems at the end of each chapter to facilitateunderstanding
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Computer Simulation of Polymeric Materials written by Japan Association for Chemical Innovation and published by Springer. This book was released on 2016-07-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to introduce a mesoscale polymer simulation system called OCTA. With its name derived from "Open Computational Tool for Advanced material technology," OCTA is a unique software product, available without charge, that was developed in a project funded by Japanese government. OCTA contains a series of simulation programs focused on mesoscale simulation of the soft matter COGNAC, SUSHI, PASTA, NAPLES, MUFFIN, and KAPSEL. When mesoscale polymer simulation is performed, one may encounter many difficulties that this book will help to overcome. The book not only introduces the theoretical background and functions of each simulation engine, it also provides many examples of the practical applications of the OCTA system. Those examples include predicting mechanical properties of plastic and rubber, morphology formation of polymer blends and composites, the micelle structure of surfactants, and optical properties of polymer films. This volume is strongly recommended as a valuable resource for both academic and industrial researchers who work in polymer simulation.
Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.
Download or read book Soft and Fragile Matter written by Michael E. Cates and published by CRC Press. This book was released on 2000-01-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering colloids, polymers, surfactant phases, emulsions, and granular media, Soft and Fragile Matter: Nonequilibrium Dynamics, Metastability and Flow (PBK) provides self-contained and pedagogical coverage of the rapidly advancing field of systems driven out of equilibrium, with a strong emphasis on unifying conceptual principles rather than material-specific details. Written by internationally recognized experts, the book contains introductions at the level of a graduate course in soft condensed matter and statistical physics to the following areas: experimental techniques, polymers, rheology, colloids, computer simulation, surfactants, phase separation kinetics, driven systems, structural glasses, slow dynamics, and granular materials. These topics lead to a range of exciting applications at the forefront of current research, including microplasticity of emulsions, sequence design of copolymers, branched polymer dynamics, nucleation kinetics in colloids, multiscale modeling, flow-induced surfactant textures, fluid demixing under shear, two-time correlation functions, chaotic sedimentation dynamics, and sound propagation in powders. Balancing theory, simulation, and experiment, this broadly-based, pedagogical account of a rapidly developing field is an excellent compendium for graduate students and researchers in condensed matter physics, materials science, and physical chemistry.
Download or read book Surface and Interfacial Forces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2018-03-26 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: A general introduction to surface and interfacial forces, perfectly combining theoretical concepts, experimental techniques and practical applications. In this completely updated edition all the chapters have been thoroughly revised and extended to cover new developments and approaches with around 15% new content. A large part of the book is devoted to surface forces between solid surfaces in liquid media, and while a basic knowledge of colloid and interface science is helpful, it is not essential since all important concepts are explained and the theoretical concepts can be understood with an intermediate knowledge of mathematics. A number of exercises with solutions and the end-of-chapter summaries of the most important equations, facts and phenomena serve as additional tools to strengthen the acquired knowledge and allow for self-study. The result is a readily accessible text that helps to foster an understanding of the intricacies of this highly relevant topic.
Download or read book Ion Containing Polymers written by A. Eisenberg and published by Elsevier. This book was released on 2012-12-02 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion-Containing Polymers: Physical Properties and Structure is Volume 2 of the series Polymer Physics. This book aims to fill in the gap in literature regarding the physical aspects of ion-containing polymers. A total of five chapters comprise this book. The Introduction (Chapter 1) generally deals with the application of ion-containing polymers, general classification, and the available works regarding the subject. Chapter 2 establishes the concepts of supermolecular structure and glass transitions in terms of the effects of ionic forces in polymers. These chapters provide the context in the discussion of viscoelastic properties of homopolymers and copolymers in Chapters 3 and 4. Finally, Chapter 5 tackles the configuration-dependent properties of ion-containing polymers. This volume will be of particular help to students in the field of physics and chemistry.
Download or read book The Structure and Conformation of Amphiphilic Membranes written by Reinhard Lipowsky and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membranes composed of amphiphilic molecules are highly flexible surfaces that determine the architecture of biological systems and provide a basic structural element for complex fluids such as microemulsions. Recently, a variety of new experimental methods such as X-ray scattering, neutron scattering, and atomic force microscopy have been used in order to study themolecular structure of these membranes. Their conformational behavior, on the other hand, is studied by optical and electron microscopy, which reveals that membranes in aqueous solution exhibit an amazing variety of different shapes. Several theoretical concepts are described suchas bending elasticity, curvature, and minimal surfaces in order to understand this polymorphism. These concepts are also useful to describe the behavior of membranes in complex fluids where they can build up hexagonal, lamellar, triply-periodic, cubic, and sponge phases. The contributions to this volume provide an up-to-date overview and describe thestate-of-the-art of this rapidly evolving field of research.
Download or read book Principles of Colloid and Surface Chemistry written by Paul C. Hiemenz and published by . This book was released on 1977 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemically Modified Nanopores and Nanochannels written by Mario Tagliazucchi and published by William Andrew. This book was released on 2016-08-29 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically Modified Nanopores and Nanochannels is devoted to chemically modified nanopores and nanochannels, and covers the fundamentals of transport in chemically modified systems, an account of the different preparation and characterization techniques of chemically modified nanopores, their applications, and case studies. The book is designed for materials and biomaterials scientists, biomedical engineers, chemists, and chemical engineers who are interested in designing and utilizing processes to synthesize, modify, characterize, use, and model nanopores. The strong chemical focus of the book differentiates it from other books published on nanopores, which traditionally focus either on physics, biophysics, and nanofabrication (solid-state nanopores) or biophysics and biology (biological ion channels and pores). Explains how the chemical modification of nanopores and nanochannels can be used in filtration, membranes, and sensing Provides advanced coverage of novel synthetic applications Focuses on the latest developments in nanopore and nanochannel engineering Presents an account of the different preparation and characterization techniques of chemically modified nanopores, their applications, and case studies
Download or read book Cell Physiology Source Book written by Nicholas Sperelakis and published by Elsevier. This book was released on 2012-12-02 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative book gathers together a broad range of ideas and topics that define the field. It provides clear, concise, and comprehensive coverage of all aspects of cellular physiology from fundamental concepts to more advanced topics. The Third Edition contains substantial new material. Most chapters have been thoroughly reworked. The book includes chapters on important topics such as sensory transduction, the physiology of protozoa and bacteria, the regulation of cell division, and programmed cell death. Completely revised and updated - includes 8 new chapters on such topics as membrane structure, intracellular chloride regulation, transport, sensory receptors, pressure, and olfactory/taste receptors Includes broad coverage of both animal and plant cells Appendixes review basics of the propagation of action potentials, electricity, and cable properties Authored by leading experts in the field Clear, concise, comprehensive coverage of all aspects of cellular physiology from fundamental concepts to more advanced topics
Download or read book Modeling and Simulation in Polymers written by Purushottam D. Gujrati and published by John Wiley & Sons. This book was released on 2010-03-30 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature and all set to become the standard in this field, this monograph begins with a look at computational viscoelastic fluid mechanics and studies of turbulent flows of dilute polymer solutions. It then goes on discuss simulations of nanocomposites, polymerization kinetics, computational approaches for polymers and modeling polyelectrolytes. Further sections deal with tire optimization, irreversible phenomena in polymers, the hydrodynamics of artificial and bacterial flagella as well as modeling and simulation in liquid crystals. The result is invaluable reading for polymer and theoretical chemists, chemists in industry, materials scientists and plastics technologists.
Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.
