Download or read book Polychloroprene Production Cost Analysis CR E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Chloroprene Rubber (also known as Polychloroprene) production from chloroprene. The process examined is a typical emulsion process. This report was developed based essentially on the following reference(s): Keywords: Neoprene, Chloroprene Rubber, 2-Chlorobuta-1,3-Diene, Synthetic Rubbers

Download or read book Polyisoprene Production Cost Analysis Polyisoprene E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyisoprene production from isoprene. The process examined is a typical solution polymerization process. This report was developed based essentially on the following reference(s): Keywords: Synthetic Rubber, Goodyear, Goodrich, Snamprogetti, Ziegler Catalyst

Download or read book Polyester Thermoplastic Polyurethane Production Cost Analysis PU E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyester Thermoplastic Polyurethane (TPU) production from methylene diphenyl diisocyanate (MDI) and poly(1,4-butanediol adipate). In this process, the polymerization reaction occurs in a twin screw extruder. This report was developed based essentially on the following reference(s): Keywords: Reactive Extruder, Extrusion, One-Shot Polymerization, Ester-Based TPU

Download or read book Ethylene Propylene Rubber Production Cost Analysis EPDM E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Propylene (EPDM) Rubber production from polymer grade (PG) propylene and ethylene. The process examined is a typical suspension polymerization process. This report was developed based essentially on the following reference(s): (1) US Patent 2016/0312021, issued to Arlanxeo in 2016 (2) US Patent 5729911 issued to Bayer in 1998 Keywords: Ethylene Propylene Diene Monomer (M-Class) Rubber, EPDM Rubber, Montecatini Edison

Download or read book Polyethylene Terephthalate Production Process Cost Analysis PET E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Terephthalate (PET) production from ethylene glycol and purified terephthalic acid (PTA). The process examined is a typical melt-phase polymerization followed by solid-state polymerization. In this process, initially an oligomer intermediate is produced by the esterification of PTA with ethylene glycol. The oligomer then undergoes a melt-polymerization and a solid-state polymerization, leading to a bottle grade PET. This report was developed based essentially on the following reference(s): (1) "Polyesters, Thermoplastic", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) "Polyesters", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Thermoplastic Polymer, Polyester, High Intrinsic Viscosity, Melt-Phase Polycondensation

Download or read book LDPE via High Pressure Tubular Process Cost Analysis LDPE E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Low Density Polyethylene (LDPE) production from polymer grade (PG) ethylene. The process examined is a typical high-pressure tubular polymerization process. This report was developed based essentially on the following reference(s): (1) US Patent 6899852, issued to ExxonMobil in 2005 (2) US Patent 20130333832, issued to LyondellBasell in 2013 Keywords: Ethene, PE, BASF, Tubular Reactor, ExxonMobil, LyondellBasell, Lupotech

Download or read book Polyethylene Furanoate Production Cost Analysis PEF E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyethylene Furanoate (PEF) production from monoethylene glycol (MEG) and 2,5-furandicarboxylic acid (FDCA). In this process, FDCA and MEG are polymerized to PEF in two polymerization steps in order to obtain Bottle-Grade PEF: melt-phase polymerization and solid-state polymerization. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) WO Patent 2015137807, issued to Furanix Technologies in 2015; (2) US Patent 6749821 issued to UOP in 2004 Keywords: Polyethylene Furanoate, Polyethylene 2,5-Furandicarboxylate, PEF, Green PEF, FDCA, MEG

Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-07 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to NOVA Chemicals SCLAIRTECH process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): EP Patent 0527144, issued to DuPont in 1996 Keywords: Ethene, DuPont Canada, Cyclohexane, Stirred-Reactor, Swing Technology, Multi-Reactor

Download or read book Propylene Production via Metathesis Cost Analysis Propylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Propylene production from ethylene and raffinate-2 using a metathesis process. The process examined is similar to CB&I Lummus Technology's Olefins Conversion Technology (OCT). In this process, Polymer Grade Propylene is produced through a metathesis reaction of ethylene with 2-butene, present in raffinate-2 feedstock. This report examines one-time costs associated with the construction of a plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in process unit (ISBL); infrastructure (OSBL), contingency and owner's cost - Total fixed capital required, divided in process unit (ISBL); infrastructure (OSBL), contingency and owner's cost - Working capital and costs incurred during industrial plant commissioning and start-up * Operating cost, broken down by: - Variable operating costs (raw materials, utilities) - Fixed operating costs (maintenance, operating charges, plant overhead, local taxes and insurance) - Depreciation This report was developed based essentially on the following reference(s): (1) US Patent 8440874, issued to Lummus Technology and BASF in 2013 (2) US Patent 20050124839, issued to Lummus Technology in 2005 Keywords: PG Propylene, Olefins Disproportionation, Lummus OCT, Olefins Metathesis, Phillips Triolefin, Propene, Ethene, Butylene, On-Purpose Propylene Production

Download or read book Polypropylene Homopolymer via Bulk Process Cost Analysis PP E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polypropylene (PP) homopolymer production from polymer grade (PG) propylene using a bulk phase process. The process examined is similar to the processes LyondellBasell Spheripol and Mitsui Hypol II. This process is based on the polymerization of liquid PG propylene, in loop reactors, to produce PP homopolymer. This report was developed based essentially on the following reference(s): "Polyolefins", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: PG Propylene, Propene, Tubular Reactor, Liquid-Phase Polymerization

Download or read book Polypropylene Homopolymer via Bulk Process Cost Analysis Polypropylene E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polypropylene (PP) homopolymer production from polymer grade (PG) propylene using a bulk phase polymerization process. The process examined is similar to the processes LyondellBasell Spheripol and Mitsui Hypol II. This process is based on the polymerization of liquid PG propylene, in loop reactors, to produce PP homopolymer. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Polyolefins", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: PG Propylene, Propene, Tubular Reactor, Liquid-Phase Polymerization

Download or read book HDPE Production via Slurry Process Cost Analysis HDPE E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a slurry process. The process examined is similar to LyondellBasell Hostalen process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): LyondellBasell, "Licensed Polyolefin Technologies and Services - Hostalen" Keywords: Ethene, Bimodal, Multimodal, CSTR, Advanced Cascade Process, ACP, Butylene

Download or read book Polybutylene Terephthalate Production from DMT Cost Analysis PBT E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polybutylene Terephthalate (PBT) production from dimethyl terephthalate (DMT). The process examined is a typical transesterification and polycondensation process. This report was developed based essentially on the following reference(s): Keywords: Polyester, Bishydroxybutyl Terephthalate, HBT, Melt Polymerization, Solid State Polymerization

Download or read book Polytrimethylene Terephthalate Production Cost Analysis PTT E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polytrimethylene Terephthalate (PTT) production from terephthalic acid and propanediol. The process examined is similar to Degussa (now Evonik) process. This report was developed based essentially on the following reference(s): (1) US Patent 7223830, issued to Zimmer in 2007 (assigned to Lurgi Zimmer GmbH in 2008) (2) EP Patent 0859020, issued to Zimmer and Degussa (now Evonik) in 2006 (3) US Patent 68007, issued to Zimmer and Shell in 2004 (assigned to Lurgi Zimmer GmbH in 2008) Keywords: 1,3-Polypropylene Terephthalate, TPA, PDO, Dimethyl Terephthalate, DMT

Download or read book PTMEG Production from THF Cost Analysis Polyether E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polytetramethylene Ether Glycol (PTMEG) production from tetrahydrofuran (THF). The process examined is a typical polymerization process. This report was developed based essentially on the following reference(s): Keywords: Polytetrahydrofuran, Asahi, Ether-Based TPU, Polyether TPU, Thermoplastic Polyurethane, Polyol, Polyether, DuPont

Download or read book The Chemical Warfare Service written by Leo P. Brophy and published by . This book was released on 1959 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications Highly visual full color graphics facilitate understanding of materials concepts and properties Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: Text and figures have been revised and updated throughout The number of worked examples has been increased by 50% The number of standard end-of-chapter exercises in the text has been doubled Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology