Download or read book Polyacrylonitrile Production Cost Analysis PAN E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polyacrylonitrile (PAN) Precursor production. In this process, acrylonitrile is polymerized with methyl acrylate comonomer via aqueous dispersion polymerization and the polymer formed is subsequently converted to fiber through wet spinning. This report was developed based essentially on the following reference(s): (1) "Acrylic Fibers," Encyclopedia of Polymer Science and Technology (2) Morgan, P., Carbon Fibers and Their Composites, 2005 Keywords: Polyacrylonitrile, Carbon Fiber, Acrylic Fiber, Suspension Polymerization, Acrylonitrile, Wet Spinning
Download or read book Carbon Fiber Production from PAN Cost Analysis Carbon Fiber E11A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Carbon Fiber production from polyacrylonitrile (PAN) fiber. In this process, PAN fiber is first stabilized. The stabilized PAN passes then through carbonization, surface treatment and sizing, before being winded. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Polyacrylonitrile, carbon fiber, acrylic fiber, PAN
Download or read book Acrylonitrile Production from Propylene Cost Analysis Acrylonitrile E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Acrylonitrile production from chemical grade (CG) propylene The process examined is a fluidized bed propylene ammoxidation process. In this process, propylene and ammonia react to produce Acrylonitrile. Acetonitrile and hydrogen cyanide are generated as by-products. This report was developed based essentially on the following reference(s): "Acrylonitrile", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: Propene, Propenenitrile, INEOS, Sohio, Fluidized Bed Reactor
Download or read book Nylon 6 6 Production Cost Analysis Nylon 66 E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Nylon 6,6 production from adipic acid and hexamethylenediamine (HMDA). The process examined is a typical batch polymerization process. This report was developed based essentially on the following reference(s): Keywords: Batch Process, Lurgi Zimmer, Uhde Inventa-Fischer, Polycondensation
Download or read book Methyl Acrylate from Acrylic Acid Cost Analysis Methyl Acrylate E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Acrylate production from acrylic acid and methanol The process examined is a typical esterification process. In this process, acrylic acid and methanol are esterified in a fixed-bed reactor producing Methyl Acrylate. This report was developed based essentially on the following reference(s): Keywords: Methyl Alcohol, Lower Alkyl Acrylate, Methyl Prop-2-Enoate
Download or read book Acrylic Maleic Copolymer Production Cost Analysis AMC E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Acrylic Acid Maleic Anhydride Copolymer production. The process examined is similar to the process developed by BASF. In this process, maleic anhydride is hydrolyzed with demineralized water and then reacted with acrylic acid in batches in a jacketed reactor with agitation. This report was developed based essentially on the following reference(s): Keywords: Acrylic Acid Maleic Anhydride Copolymer, Acrylic Acid Maleic Acid Copolymer
Download or read book Acrylic Acid Production from Propylene Cost Analysis Acrylic Acid E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ester-Grade Acrylic Acid (EAA) production from chemical grade (CG) propylene The process examined is a typical propylene oxidation. In this process, propylene passes through a two-stage vapor phase oxidation to generate an acrylic acid-containing gas, from which acrylic acid is recovered via absorption in water. The aqueous acrylic acid solution is purified via light solvent extraction to Ester-grade Acrylic Acid (EAA), which is used in the production of acrylic esters. This report was developed based essentially on the following reference(s): "Acrylic Acid", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Propene, Air Oxidation, Propenoic Acid, Nippon Shokubai, Rohm & Haas, Dow
Download or read book Ethyl Acrylate from Acrylic Acid Cost Analysis Ethyl Acrylate E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethyl Acrylate production from acrylic acid and ethanol The process examined is a typical esterification process. In this process, acrylic acid and ethanol are esterified in a fixed-bed reactor producing Ethyl Acrylate. This report was developed based essentially on the following reference(s): Keywords: Ethyl Alcohol, Lower Alkyl Acrylate, Ethyl Propenoate
Download or read book Methacrylic Acid Production from Isobutylene Cost Analysis MAA E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methacrylic Acid (MAA) production from isobutylene The process examined is a typical oxidation process. This report was developed based essentially on the following reference(s): Keywords: Unsaturated Polyester, UPR, MAA, i-Butylene
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book Finite Element Modelling of Composite Materials and Structures written by F L Matthews and published by Elsevier. This book was released on 2000-10-27 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element modelling of composite materials and structures provides an introduction to a technique which is increasingly being used as an analytical tool for composite materials.The text is presented in four parts: Part one sets the scene and reviews the fundamentals of composite materials together with the basic nature of FRP and its constituents. Two-dimensional stress-strain is covered, as is laminated plated theory and its limitations. Part two reviews the basic principles of FE analysis, starting with underlying theoretical issues and going on to show how elements are derived, a model is generated and results are processed. Part three builds on the basics of FE analysis and considers the particular issues that arise in applying finite elements to composites, especially to the layered nature of the material. Part four deals with the application of FE to FRP composites, presenting analytical models alongside FE representations. Specific issues addressed include interlaminar stresses, fracture delamination, joints and fatigue. This book is invaluable for students of materials science and engineering, and for engineers and others wishing to expand their knowledge of structural analysis. Covers important work on finite element analysis of composite material performance Based on material developed for an MSc course at Imperial College, London, UK Covers particular problems such as holes, free edges with FE results compared with experimental data and classical analysis
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Fiber reinforced Composites written by P. K. Mallick and published by . This book was released on 1988 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Fibers and Their Composite Materials written by Luke Henderson and published by MDPI. This book was released on 2019-07-16 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon fiber is an oft-referenced material that serves as a means to remove mass from large transport infrastructure. Carbon fiber composites, typically plastics reinforced with the carbon fibers, are key materials in the 21st century and have already had a significant impact on reducing CO2 emissions. Though, as with any composite material, the interface where each component meets, in this case the fiber and plastic, is critical to the overall performance. This text summarizes recent efforts to manipulate and optimize the interfacial interaction between these dissimilar materials to improve overall performance.
Download or read book Composite Materials written by Krishan K. Chawla and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the relationship between structure and properties, this is a well-balanced treatment of the mechanics and the materials science of composites, while not neglecting the importance of processing. This updated second edition contains new chapters on fatigue and creep of composites, and describes in detail how the various reinforcements, the materials in which they are embedded, and of the interfaces between them, control the properties of the composite materials at both the micro- and macro-levels. Extensive use is made of micrographs and line drawings, and examples of practical applications in various fields are given throughout the book, together with extensive references to the literature. Intended for use in graduate and upper-division undergraduate courses, this book will also prove a useful reference for practising engineers and researchers in industry and academia.
Download or read book Electrospinning written by Sajjad Haider and published by BoD – Books on Demand. This book was released on 2016-12-21 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a timely, an informative, an interesting, and a well-managed book. The book not only offers an in-depth review of the current status of the knowledge of electrospinning and its biomedical applications but also discusses the emerging ideas and features, both from the East and West, with a focus on the needless electrospinning for the production of uniform fibers. The book is equally helpful to the experts of this field, who wish to enhance their understanding of the emerging technologies, and to the new comers, who can use this book as a reference.
Download or read book Modeling of Carbon Nanotubes Graphene and their Composites written by Konstantinos I. Tserpes and published by Springer Science & Business Media. This book was released on 2013-10-15 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large part of the research currently being conducted in the fields of materials science and engineering mechanics is devoted to carbon nanotubes and their applications. In this process, modeling is a very attractive investigation tool due to the difficulties in manufacturing and testing of nanomaterials. Continuum modeling offers significant advantages over atomistic modeling. Furthermore, the lack of accuracy in continuum methods can be overtaken by incorporating input data either from experiments or atomistic methods. This book reviews the recent progress in continuum modeling of carbon nanotubes and their composites. The advantages and disadvantages of continuum methods over atomistic methods are comprehensively discussed. Numerical models, mainly based on the finite element method, as well as analytical models are presented in a comparative way starting from the simulation of isolated pristine and defected nanotubes and proceeding to nanotube-based composites. The ability of continuum methods to bridge different scales is emphasized. Recommendations for future research are given by focusing on what still continuum methods have to learn from the nano-scale. The scope of the book is to provide current knowledge aiming to support researchers entering the scientific area of carbon nanotubes to choose the appropriate modeling tool for accomplishing their study and place their efforts to further improve continuum methods.
