Download or read book Policy Guidance on the Use of MOVES2014 for State Implementation Plan Development Transportation Conformity and Other Purposes written by and published by . This book was released on 2014 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Policy Guidance on the Use of MOVES3 for State Implementation Plan Development Transportation Conformity General Conformity and Other Purposes written by United States. Environmental Protection Agency. Office of Transportation and Air Quality and published by . This book was released on 2020 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Policy Guidance on the Use of MOVES4 for State Implementation Plan Development Transportation Conformity General Conformity and Other Purposes written by United States. Environmental Protection Agency. Office of Transportation and Air Quality and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Policy Guidance on the Use of MOVES2010 for State Implementation Plan Development Transportation Conformity and Other Purposes written by and published by . This book was released on 2009 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This guidance describes how and when to use the MOVES2010 emissions model for state implementation plan (SIP) development, transportation conformity determinations, and other purposes"--Page 3.

Download or read book Policy Guidance on the Use of MOVES2010 and Subsequent Minor Revisions for State Implementation Plan Development Transportation Conformity and Other Purposes written by United States. Environmental Protection Agency. Transportation and Climate Division and published by . This book was released on 2012 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guidance for Developing Transportation Conformity State Implementation Plans SIPs written by and published by . This book was released on 2009 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides guidance on the statutory and regulatory requirements for states to develop conformity state implementation plans. This document supersedes the November 2004 Conformity SIP Guidance and Section 7 of the Interim Guidance for Implementing the Transportation Conformity Provisions in the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users (SAFETEA-LU) (February 2006).

Download or read book Guidance for Developing Transportation Conformity State Implementation Plans Sips written by United States Environmental Protection Agency (EPA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-30 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidance for Developing Transportation Conformity State Implementation Plans (SIPs)

Download or read book Technical Guidance on the Use of Moves2009 for State Implementation Plans and Regional Transportation Conformity written by United States Environmental Protection Agency (EPA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-30 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical Guidance on the Use of MOVES2009 for State Implementation Plans and Regional Transportation Conformity

Download or read book Technical Guidance on the Use of MOVES2010 for Emission Inventory Preparation in State Implementation Plans and Transportation Conformity written by and published by . This book was released on 2010 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transportation Conformity State Implementation Plan written by and published by . This book was released on 1994 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guidance for Determining Conformity of Transportation Plans Programs and Projects with Clean Air Act Implementation Plans During Phase One of the Interim Period written by United States. Environmental Protection Agency and published by . This book was released on 1991 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guidance for the Use of Latest Planning Assumptions in Transportation Conformity Determinations written by United States. Environmental Protection Agency. Office of Transportation and Air Quality and published by . This book was released on 2008 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guidance document supersedes the January 18, 2001 guidance memorandum to address the July 1, 2004 transportation conformity final rule revisions on the use of latest planning assumptions in transportation conformity determinations.

Download or read book Transportation Control Measure written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transportation Control Measures written by and published by . This book was released on 1990 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developing and Implementing Transportation Management Plans for Work Zones written by United States Department of Transportation and published by CreateSpace. This book was released on 2015-02-23 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Guide is designed to help transportation agencies develop and implement transportation management plans (TMPs). A TMP lays out a set of coordinated transportation management strategies and describes how they will be used to manage the work zone impacts of a road project. The scope, content, and level of detail of a TMP may vary based on an agency's work zone policy and the anticipated work zone impacts of the project. The intended audience for this Guide is the persons responsible for developing TMPs. Depending on the agency's processes and procedures, this may be agency personnel and/ or contractors. Persons responsible for TMP-related policy/procedure development and revision, implementation, review, approval, and assessment will also benefit from this Guide. This document also provides support to agencies in their efforts to implement the recently updated work zone regulations. In September 2004, the Federal Highway Administration (FHWA) published updates to the work zone regulations at 23 CFR 630 Subpart J. The updated rule is referred to as the Work Zone Safety and Mobility Rule (Rule) and applies to all State and local governments that receive Federal-aid highway funding. Transportation agencies are required to comply with the provisions of the Rule by October 12, 2007. The changes made to the regulations broaden the former rule to better address the work zone issues of today and the future. Growing congestion on many roads, and an increasing need to perform rehabilitation and reconstruction work on existing roads already carrying traffic, are some of the issues that have lead to additional, more complex challenges to maintaining work zone safety and mobility. To help address these issues, the Rule provides a decision-making framework that facilitates comprehensive consideration of the broader safety and mobility impacts of work zones across project development stages, and the adoption of additional strategies that help manage these impacts during project implementation. The Rule requires agencies to develop an agency-level work zone safety and mobility policy to support systematic consideration and management of work zone impacts across all stages of project development. Based on the policy, agencies will develop processes and procedures to support implementation of the policy. The third primary element of the Rule calls for the development of project-level procedures to address the work zone impacts of individual projects. This includes requirements for identifying significant projects and developing and implementing TMPs for all Federal-aid highway projects. This document is the third of four guidance documents on the Rule and contains guidance, as well as many examples of how transportation agencies have developed and implemented TMPs or similar plans.

Download or read book Implementing the Rule on Work Zone Safety and Mobility written by United States Department of Transportation and published by CreateSpace. This book was released on 2015-02-23 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: In September 2004, the Federal Highway Administration (FHWA) published updates to the work zone regulations at 23 CFR 630 Subpart J. The updated rule is referred to as the Work Zone Safety and Mobility Rule (Rule) and applies to all State and local governments that received Federal-aid highway funding. Transportation agencies are required to comply with the provisions of the Rule by October 12, 2007. The changes made to the regulations broaden the former rule to better address the work zone issues of today and the future. Growing congestion on many roads, and an increasing need to perform rehabilitation and reconstruction work on existing roads already carrying traffic, are some of the issues that have lead to additional, more complex challenges to maintaining work zone safety and mobility. To help address these issues, the Rule provides a decision-making framework that facilitates comprehensive consideration of the broader safety and mobility impacts of work zones across project development stages, and the adoption of additional strategies that help manage these impacts during project implementation. The Rule requires agencies to develop an agency-level work zone safety and mobility policy to support systematic consideration and management of work zone impacts across all stages of project development. Based on the policy, agencies will develop standard processes and procedures to support implementation of the policy. The third primary element of the Rule calls for the development of project-level procedures to address the work zone impacts of individual projects. To help transportation agencies understand and implement the provisions of the Rule, FHWA has been developing four guidance documents. This Guide is the main Rule Implementation Guide and provides a general overview of the Rule and overarching guidance for implementing the provisions of the Rule. This document includes guidelines and sample approaches, examples from transportation agencies using practices that relate to the Rule, and sources for more information. While this Guide covers aspects of the Rule, it also contains information that can be useful to agencies in all of their efforts to improve safety and mobility in and around work zones, and thereby support effective operations and management of our transportation system.

Download or read book Transportation Conformity written by and published by . This book was released on 2017 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transportation conformity is required under the Clean Air Act (CAA) Section 176(c) to ensure that Federally-supported transportation activities are consistent with (“conform to”) the purpose of a State Implementation Plan (SIP). Transportation conformity establishes the framework for improving air quality to protect public health and the environment. Conformity to the purpose of the SIP means Federal Highway Administration (FHWA) and Federal Transit Administration (FTA) funding and approvals are given to highway and transit activities that will not cause new air quality violations, worsen existing air quality violations, or delay timely attainment of the relevant air quality standard, or any interim milestone. This Guide was prepared to help State and local officials understand transportation conformity and how conformity requirements relate to transportation investments in their communities. Specifically, the implications of conformity on metropolitan transportation plans, transportation improvement programs (TIPs), and transportation projects are discussed. The Guide provides overview information on the major elements of the conformity process and provides answers to basic questions. Several exhibits are included in the Guide to illustrate key elements of the conformity process. Appendices are also included that discuss the health effects of pollutants, options to reduce on-road mobile source emissions, and resource agency contacts.