Download or read book Pole and Zero Sensitivity Calculation in Asymptotic Waveform Evaluation written by John Y. Lee and published by . This book was released on 1992 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "Asymptotic Waveform Evaluation (AWE) is a new method to approximate the behavior of linear(ized) circuits in either the time or the frequency domain in terms of a dominant pole/zero approximation. An efficient method for calculating the sensitivities of the poles and zeros found by AWE has been developed. Using the adjoint sensitivity method, it is possible to inexpensively compute the sensitivities of the poles and zeros with respect to all circuit parameters, as well as to suppressed circuit parasitics. The sensitivities of the approximate poles and zeros found by AWE show excellent correlation with those of the real circuit, and provide useful information in both the time and frequency domains."
Download or read book Efficient Pole Zero Sensitivity Calculation in AWE written by John Y. Lee and published by . This book was released on 1990 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "Asymptotic Waveform Evaluation (AWE) is a new method to approximate the behavior of linear(ized) circuits in either the time or the frequency domain in terms of a dominant pole/zero approximation. An efficient method for calculating the sensitivities of the poles and zeros found by AWE has been developed. Using the adjoint sensitivity method, it is possible to inexpensively compute the sensitivities of the poles and zeros with respect to all circuit parameters, as well as to circuit parasitics. The sensitivities of the poles and zeros show excellent correlation with the perturbation response, and can provide valuable feedback to the circuit designer."
Download or read book Asymptotic Waveform Evaluation written by Eli Chiprout and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intense drive for signal integrity has been at the forefront ofrapid and new developments in CAD algorithms. Thousands ofengineers, intent on achieving the best design possible, use SPICE on a daily basis for analog simulation and general circuit analysis. But the strained demand for high data speeds, coupled with miniaturizationon an unprecedented scale, has highlighted the previously negligible effects of interconnects; effects which are not always handled appro priately by the present levels of SPICE. Signals at these higher speeds may be degraded by long interconnect lengths compared to the increasingly shorter sig nal rise times. Interconnect structures can be diverse (pins, connectors, leads, microstrips, striplines, etc. ) and present at any of the hierarchical packaging levels: integrated circuits, printed circuit boards, multi-chip modules or sys tem backplanes. Analysis of these effects in any CAD package has become a necessity. Asymptotic waveform evaluation (AWE) and other moment matching tech niques have recently proven useful in the analysis of interconnect structures and various networks containing large linear structures with nonlinear termi nations. Previously, all that was available to the designer was a full SPICE simulation or a quick but uncertain timing estimation. Moment matching, used in linear systems analysis as a method of model reduction, describes a method to extract a small set of dominant poles from a large network. The information is obtained from the Taylor series coefficients (moments) of that system.
Download or read book Digital Timing Macromodeling for VLSI Design Verification written by Jeong-Taek Kong and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Timing Macromodeling for VLSI Design Verification first of all provides an extensive history of the development of simulation techniques. It presents detailed discussion of the various techniques implemented in circuit, timing, fast-timing, switch-level timing, switch-level, and gate-level simulation. It also discusses mixed-mode simulation and interconnection analysis methods. The review in Chapter 2 gives an understanding of the advantages and disadvantages of the many techniques applied in modern digital macromodels. The book also presents a wide variety of techniques for performing nonlinear macromodeling of digital MOS subcircuits which address a large number of shortcomings in existing digital MOS macromodels. Specifically, the techniques address the device model detail, transistor coupling capacitance, effective channel length modulation, series transistor reduction, effective transconductance, input terminal dependence, gate parasitic capacitance, the body effect, the impact of parasitic RC-interconnects, and the effect of transmission gates. The techniques address major sources of errors in existing macromodeling techniques, which must be addressed if macromodeling is to be accepted in commercial CAD tools by chip designers. The techniques presented in Chapters 4-6 can be implemented in other macromodels, and are demonstrated using the macromodel presented in Chapter 3. The new techniques are validated over an extremely wide range of operating conditions: much wider than has been presented for previous macromodels, thus demonstrating the wide range of applicability of these techniques.
Download or read book Advances in Natural Computation Fuzzy Systems and Knowledge Discovery written by Yong Liu and published by Springer Nature. This book was released on 2019-11-06 with total page 1119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the recent advances in natural computation, fuzzy systems and knowledge discovery. Presenting selected, peer-reviewed papers from the 15th International Conference on Natural Computation, Fuzzy Systems and Knowledge Discovery (ICNC-FSKD 2019), held in Kunming, China, from 20 to 22 July 2019, it is a useful resource for researchers, including professors and graduate students, as well as R&D staff in industry.
Download or read book Advanced Symbolic Analysis for VLSI Systems written by Guoyong Shi and published by Springer. This book was released on 2014-06-19 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the recent advances in symbolic analysis techniques for design automation of nanometer VLSI systems. The presentation is organized in parts of fundamentals, basic implementation methods and applications for VLSI design. Topics emphasized include statistical timing and crosstalk analysis, statistical and parallel analysis, performance bound analysis and behavioral modeling for analog integrated circuits. Among the recent advances, the Binary Decision Diagram (BDD) based approaches are studied in depth. The BDD-based hierarchical symbolic analysis approaches, have essentially broken the analog circuit size barrier.
Download or read book Proceedings written by and published by . This book was released on 1997 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Circuit and System Simulation Methods written by Lawrence T. Pillage and published by McGraw-Hill Professional Publishing. This book was released on 1995 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Trade Offs in Analog Circuit Design written by Chris Toumazou and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 1065 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the frequency of communication systems increases and the dimensions of transistors are reduced, more and more stringent performance requirements are placed on analog circuits. This is a trend that is bound to continue for the foreseeable future and while it does, understanding performance trade-offs will constitute a vital part of the analog design process. It is the insight and intuition obtained from a fundamental understanding of performance conflicts and trade-offs, that ultimately provides the designer with the basic tools necessary for effective and creative analog design. Trade-offs in Analog Circuit Design, which is devoted to the understanding of trade-offs in analog design, is quite unique in that it draws together fundamental material from, and identifies interrelationships within, a number of key analog circuits. The book covers ten subject areas: Design methodology, Technology, General Performance, Filters, Switched Circuits, Oscillators, Data Converters, Transceivers, Neural Processing, and Analog CAD. Within these subject areas it deals with a wide diversity of trade-offs ranging from frequency-dynamic range and power, gain-bandwidth, speed-dynamic range and phase noise, to tradeoffs in design for manufacture and IC layout. The book has by far transcended its original scope and has become both a designer's companion as well as a graduate textbook. An important feature of this book is that it promotes an intuitive approach to understanding analog circuits by explaining fundamental relationships and, in many cases, providing practical illustrative examples to demonstrate the inherent basic interrelationships and trade-offs. Trade-offs in Analog Circuit Design draws together 34 contributions from some of the world's most eminent analog circuits-and-systems designers to provide, for the first time, a comprehensive text devoted to a very important and timely approach to analog circuit design.
Download or read book Design Automation 29th written by and published by . This book was released on 1992 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the conference held in Anaheim, California, June 1992, comprise 125 papers organized into 44 sessions. There is increased emphasis on presentations (short tutorials, panels, and selected papers) of interest to the design automation user community, with a better balance between the
Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.
Download or read book The Engineering Index Annual written by and published by . This book was released on 1992 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Modeling and Simulation of High Speed VLSI Interconnects written by Michel S. Nakhla and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Simulation of High Speed VLSI Interconnects brings together in one place important contributions and state-of-the-art research results in this rapidly advancing area. Modeling and Simulation of High Speed VLSI Interconnects serves as an excellent reference, providing insight into some of the most important issues in the field.
Download or read book Science Abstracts written by and published by . This book was released on 1993 with total page 2316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Analog Circuits written by Esteban Tlelo-Cuautle and published by BoD – Books on Demand. This book was released on 2011-02-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights key design issues and challenges to guarantee the development of successful applications of analog circuits. Researchers around the world share acquired experience and insights to develop advances in analog circuit design, modeling and simulation. The key contributions of the sixteen chapters focus on recent advances in analog circuits to accomplish academic or industrial target specifications.
Download or read book Machine Learning for Model Order Reduction written by Khaled Salah Mohamed and published by . This book was released on 2018 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book discusses machine learning for model order reduction, which can be used in modern VLSI design to predict the behavior of an electronic circuit, via mathematical models that predict behavior. The author describes techniques to reduce significantly the time required for simulations involving large-scale ordinary differential equations, which sometimes take several days or even weeks. This method is called model order reduction (MOR), which reduces the complexity of the original large system and generates a reduced-order model (ROM) to represent the original one. Readers will gain in-depth knowledge of machine learning and model order reduction concepts, the tradeoffs involved with using various algorithms, and how to apply the techniques presented to circuit simulations and numerical analysis. Introduces machine learning algorithms at the architecture level and the algorithm levels of abstraction; Describes new, hybrid solutions for model order reduction; Presents machine learning algorithms in depth, but simply; Uses real, industrial applications to verify algorithms.
Download or read book Instrumentation in Earthquake Seismology written by Jens Havskov and published by Springer Science & Business Media. This book was released on 2010-02-11 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is unique and comprehensive coverage of modern seismic instrumentation, based on the authors’ practical experience of a quarter-century in seismology and geophysics. Their goal is to provide not only detailed information on the basics of seismic instruments but also to survey equipment on the market, blending this with only the amount of theory needed to understand the basic principles. Seismologists and technicians working with seismological instruments will find here the answers to their practical problems. Instrumentation in Earthquake Seismology is written to be understandable to the broad range of professionals working with seismological instruments and seismic data, whether students, engineers or seismologists. Whether installing seismic stations, networks and arrays, working and calibrating stationary or portable instruments, dealing with response information, or teaching about seismic instruments, professionals and academics now have a practical and authoritative sourcebook. Includes: SEISAN and SEISLOG software systems that are available from http://extras.springer.com and http://www.geo.uib.no/seismo/software/software.html
