Download or read book Polarization Transfer in the D epol E Ppol n Reaction Up to Q 2 written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The recoil proton polarization was measured in the d(epol, e' ppol)n reaction in Hall A of the Thomas Jefferson National Accelerator Facility (JLab). The electron kinematics were centered on the quasielastic peak (x{sub Bj} (almost equal to) 1) and included three values of the squared four-momentum transfer, Q2=0.43, 1.00 and 1.61 (GeV/c)2. For Q2=0.43 and 1.61 (GeV/c)2, the missing momentum, p{sub m}, was centered at zero while for Q2=1.00 (GeV/c)2 two values of p{sub m} were chosen: 0 and 174 MeV/c. At low p{sub m}, the Q2 dependence of the longitudinal polarization, P{sub z}', is not well described by a state-of-the-art calculation. Further, at higher p{sub m}, a 3.5 sigma discrepancy was observed in the transverse polarization, P(subscript x)'. Understanding the origin of these discrepancies is important in order to confidently extract the neutron electric form factor from the analogous d(epol, e' npol)p experiment.
Download or read book Polarization Transfer Measurements of D e E p Reaction in the Dip Region at Q2 0 31 GeV2 c2 written by Kyungseon Joo and published by . This book was released on 1997 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polarization Transfer in the 4He e2 e p2 3H Reaction at Q2 written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, proton recoil polarization was measured in the quasielastic 4He(e→,e'p→)3H reaction at Q2 = 0.8 (GeV/c)2 and 1.3 (GeV/c)2 with unprecedented precision. The polarization-transfer coefficients are found to differ from those of the 1H(e→,e'p→) reaction, contradicting a relativistic distorted-wave approximation, and favoring either the inclusion of medium-modified proton form factors predicted by the quark-meson coupling model or a spin-dependent charge-exchange final-state interaction. For the first time, the polarization-transfer ratio is studied as a function of the virtuality of the proton.
Download or read book Polarization Transfer in the He 4 polarized e E prime Polarized p H 3 Reaction Up to Q2 written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We have measured the proton recoil polarization in the 4He(polarized-e, e-prime, p)3H reaction at Q2 = 0.5, 1.0, 1.6, and 2.6 (GeV/c)2. The measured ratio of polarization transfer coefficients differs from a fully relativistic calculation, favoring the inclusion of a predicted medium modification of the proton form factors based on a quark-meson coupling model. In contrast, the measured induced polarizations agree reasonably well with the fully relativistic calculation indicating that the treatment of final-state interactions is under control.
Download or read book Polarization Transfer in the 4He e u2192 e p u2192 3H Reaction at Q2 written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Here, proton recoil polarization was measured in the quasielastic 4He(e→,e'p→)3H reaction at Q2 = 0.8 (GeV/c)2 and 1.3 (GeV/c)2 with unprecedented precision. The polarization-transfer coefficients are found to differ from those of the 1H(e→,e'p→) reaction, contradicting a relativistic distorted-wave approximation, and favoring either the inclusion of medium-modified proton form factors predicted by the quark-meson coupling model or a spin-dependent charge-exchange final-state interaction. For the first time, the polarization-transfer ratio is studied as a function of the virtuality of the proton.
Download or read book Plasmonics Fundamentals and Applications written by Stefan Alexander Maier and published by Springer Science & Business Media. This book was released on 2007-05-16 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered a major field of photonics, plasmonics offers the potential to confine and guide light below the diffraction limit and promises a new generation of highly miniaturized photonic devices. This book combines a comprehensive introduction with an extensive overview of the current state of the art. Coverage includes plasmon waveguides, cavities for field-enhancement, nonlinear processes and the emerging field of active plasmonics studying interactions of surface plasmons with active media.
Download or read book Surface Forces written by Nikolai V. Churaev and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is devoted to long-range surface forces sig nificant far beyond a single monolayer and felt over tens or even hundreds of molecular layers adjacent to an interface. The transi tion from the concept of short-range effects that reigned earlier to the concept of long-range forces simultaneously signified the transition from a two-dimensional world to a three-dimensional one, incomparably richer in physicochemical phenomena. This transition took many years and evolved through many steps. It began with the Gouy-Chapman theory of diffuse ionic atmospheres, which together with London's theory of molecular forces was used as a basis for the development (beginning in 1937) of the DLVO theory of stability of lyophobic colloids. Further elaboration of the theory involved the introduction of new types of force, and a generalization (in 1954) to the case of interaction between unlike particles (hetero coagulation). This theory is fundamental in such large-scale prac tical problems as flotation, water treatment, dyeing, soil science, microbiology, and interaction between biological cells. This book is the first comprehensive monograph devoted to sur face forces. This fact makes it easier to attract the reader's interest; yet, the reader's demands become all the more difficult to satisfy completely. Indeed, the research that we review and analyze here covers about 50 years of work. Much data has been amassed, so that the main problem was a careful selection and an alysis.
Download or read book A Text Book of Medical Instruments written by S. Ananthi and published by New Age International. This book was released on 2006 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: This book has therefore subdivided the realm of medical instruments into the same sections like a text on physiology and introduces the basic early day methods well, before dealing with the details of present day instruments currently in
Download or read book Free Energy Calculations written by Christophe Chipot and published by Springer Science & Business Media. This book was released on 2007-01-08 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Free energy constitutes the most important thermodynamic quantity to understand how chemical species recognize each other, associate or react. Examples of problems in which knowledge of the underlying free energy behaviour is required, include conformational equilibria and molecular association, partitioning between immiscible liquids, receptor-drug interaction, protein-protein and protein-DNA association, and protein stability. This volume sets out to present a coherent and comprehensive account of the concepts that underlie different approaches devised for the determination of free energies. The reader will gain the necessary insight into the theoretical and computational foundations of the subject and will be presented with relevant applications from molecular-level modelling and simulations of chemical and biological systems. Both formally accurate and approximate methods are covered using both classical and quantum mechanical descriptions. A central theme of the book is that the wide variety of free energy calculation techniques available today can be understood as different implementations of a few basic principles. The book is aimed at a broad readership of graduate students and researchers having a background in chemistry, physics, engineering and physical biology.
Download or read book Biopolymers from Renewable Resources written by David L. Kaplan and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers from Renewable Resources is a compilation of information on the diverse and useful polymers derived from agricultural, animal, and microbial sources. The volume provides insight into the diversity of polymers obtained directly from, or derived from, renewable resources. The beneficial aspects of utilizing polymers from renewable resources, when considering synthesis, pro cessing, disposal, biodegradability, and overall material life-cycle issues, suggests that this will continue to be an important and growing area of interest. The individual chapters provide information on synthesis, processing and properties for a variety of polyamides, polysaccharides, polyesters and polyphenols. The reader will have a single volume that provides a resource from which to gain initial insights into this diverse field and from which key references and contacts can be drawn. Aspects of biology, biotechnology, polymer synthesis, polymer processing and engineering, mechanical properties and biophysics are addressed to varying degrees for the specific biopolymers. The volume can be used as a reference book or as a teaching text. At the more practical level, the range of important materials derived from renewable resources is both extensive and impressive. Gels, additives, fibers, coatings and films are generated from a variety of the biopolymers reviewed in this volume. These polymers are used in commodity materials in our everyday lives, as well as in specialty products.
Download or read book Introduction to Practical Biochemistry written by David T. Plummer and published by . This book was released on 2001-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Greek written by Geoffrey Horrocks and published by John Wiley & Sons. This book was released on 2014-01-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Greek: A History of the Language and its Speakers, Second Edition reveals the trajectory of the Greek language from the Mycenaean period of the second millennium BC to the current day. • Offers a complete linguistic treatment of the history of the Greek language • Updated second edition features increased coverage of the ancient evidence, as well as the roots and development of diglossia • Includes maps that clearly illustrate the distribution of ancient dialects and the geographical spread of Greek in the early Middle Ages
Download or read book Dictionary of Acronyms and Technical Abbreviations written by Jakob Vlietstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Dictionary covers information and communication technology (ICT), including hardware and software; information networks, including the Internet and the World Wide Web; automatic control; and ICT-related computer-aided fields. The Dictionary also lists abbreviated names of relevant organizations, conferences, symposia and workshops. This reference is important for all practitioners and users in the areas mentioned above, and those who consult or write technical material. This Second Edition contains 10,000 new entries, for a total of 33,000.
Download or read book Applied Quantum Mechanics written by Walter Ashley Harrison and published by World Scientific. This book was released on 2000 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum mechanics is widely recognized as the basic law which governs all of nature, including all materials and devices. It has always been essential to the understanding of material properties, and as devices become smaller it is also essential for studying their behavior. Nevertheless, only a small fraction of graduate engineers and materials scientists take a course giving a systematic presentation of the subject. The courses for physics students tend to focus on the fundamentals and formal background, rather than on application, and do not fill the need. This invaluable text has been designed to fill the very apparent gap.The book covers those parts of quantum theory which may be necessary for a modern engineer. It focuses on the approximations and concepts which allow estimates of the entire range of properties of nuclei, atoms, molecules, and solids, as well as the behavior of lasers and other quantum-optic devices. It may well prove useful also to graduate students in physics, whose courses on quantum theory tend not to include any of these applications. The material has been the basis of a course taught to graduate engineering students for the past four years at Stanford University.Topics Discussed: Foundations; Simple Systems; Hamiltonian Mechanics; Atoms and Nuclei; Molecules; Crystals; Transitions; Tunneling; Transition Rates; Statistical Mechanics; Transport; Noise; Energy Bands; Electron Dynamics in Solids; Vibrations in Solids; Creation and Annihilation Operators; Phonons; Photons and Lasers; Coherent States; Coulomb Effects; Cooperative Phenomena; Magnetism; Shake-off Excitations; Exercise Problems.
Download or read book Squid as Experimental Animals written by W.J., Jr. Adelman and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: The predecessor to this book was A Guide to the Laboratory Use of the Squid Loligo pealei published by the Marine Biological Laboratory, Woods Hole, Massachusetts in 1974. The revision of this long out of date guide, with the approval of the Marine Biological Laboratory, is an attempt to introduce students and researchers to the cephalopods and particularly the squid as an object of biological research. Therefore, we have decided to expand on its original theme, which was to present important practical aspects for using the squid as experimental animals. There are twenty two chapters instead of the original eight. The material in the original eight chapters has been completely revised. Since more than one method can be used for accomplishing a given task, some duplication of methods was considered desirable in the various chapters. Thus, the methodology can be chosen which is best suited for each reader's requirements. Each subject also contains a mini-review which can serve as an introduction to the various topics. Thus, the volume is not just a laboratory manual, but can also be used as an introduction to squid biology. The book is intended for laboratory technicians, advanced undergraduate students, graduate students, researchers, and all others who want to learn the purpose, methods, and techniques of using squid as experimental animals. This is the reason why the name has been changed to its present title. Preceding the chapters is a list of many of the abbreviations, prefixes, and suffixes used in this volume.
Download or read book Luminescence and the Solid State written by Richard C. Ropp and published by Elsevier. This book was released on 2004-05-06 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first date of publication of this book in 1991, the subject of phosphors and luminescence has assumed even more importance in the overall scheme of technological development. Many new types of displays have appeared which depend upon phosphors in their operation. Some of these were pure conjecture in 1991 but are a reality in 2004. Descriptions have been included of the newer (as well as the older) types of displays in this edition along with an annotated portrait of the phosphors used in each category. Many of these new light sources promise to displace and make obsolete our current light sources, such as incandescent lamps, fluorescent lamps and the ubiquitous colour Cathode Ray Tube now used in TV and computer monitors. The importance of solid state science are summarized in the introductory chapters of this edition, and many of the chapters have been completely rewritten or revised. Each chapter has a special contribution to make in the overall understanding of the solid state science of phosphors and luminescence. Introduces the reader to the science and art of preparing inorganic luminescent materials Describes how and why luminescent materials exhibit such specific intrinsic properties Describes the science of the solid state and presents the exact formulas and conditions required to make all of the phosphors known at that time
Download or read book Heavy Metals in Soils written by Brian J. Alloway and published by Springer Science & Business Media. This book was released on 2012-07-18 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of the book has been completely re-written, providing a wider scope and enhanced coverage. It covers the general principles of the natural occurrence, pollution sources, chemical analysis, soil chemical behaviour and soil-plant-animal relationships of heavy metals and metalloids, followed by a detailed coverage of 21 individual elements, including: antimony, arsenic, barium, cadmium, chromium, cobalt, copper, gold, lead, manganese, mercury, molybdenum, nickel, selenium, silver, thallium, tin, tungsten, uranium, vanadium and zinc. The book is highly relevant for those involved in environmental science, soil science, geochemistry, agronomy, environmental health, and environmental engineering, including specialists responsible for the management and clean-up of contaminated land.
