Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Point Defects in Semiconductors and Insulators written by Johann-Martin Spaeth and published by Springer Science & Business Media. This book was released on 2003-01-22 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precedent book with the title "Structural Analysis of Point Defects in Solids: An introduction to multiple magnetic resonance spectroscopy" ap peared about 10 years ago. Since then a very active development has oc curred both with respect to the experimental methods and the theoretical interpretation of the experimental results. It would therefore not have been sufficient to simply publish a second edition of the precedent book with cor rections and a few additions. Furthermore the application of the multiple magnetic resonance methods has more and more shifted towards materials science and represents one of the important methods of materials analysis. Multiple magnetic resonances are used less now for "fundamental" studies in solid state physics. Therefore a more "pedestrian" access to the meth ods is called for to help the materials scientist to use them or to appreciate results obtained by using these methods. We have kept the two introduc tory chapters on conventional electron paramagnetic resonance (EPR) of the precedent book which are the base for the multiple resonance methods. The chapter on optical detection of EPR (ODEPR) was supplemented by sections on the structural information one can get from "forbidden" transitions as well as on spatial correlations between defects in the so-called "cross relaxation spectroscopy". High-field ODEPR/ENDOR was also added. The chapter on stationary electron nuclear double resonance (ENDOR) was supplemented by the method of stochastic END OR developed a few years ago in Paderborn which is now also commercially available.
Download or read book Defects in HIgh k Gate Dielectric Stacks written by Evgeni Gusev and published by Springer Science & Business Media. This book was released on 2006-02-15 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this NATO Advanced Research Workshop (ARW) entitled “Defects in Advanced High-k Dielectric Nano-electronic Semiconductor Devices”, which was held in St. Petersburg, Russia, from July 11 to 14, 2005, was to examine the very complex scientific issues that pertain to the use of advanced high dielectric constant (high-k) materials in next generation semiconductor devices. The special feature of this workshop was focus on an important issue of defects in this novel class of materials. One of the key obstacles to high-k integration into Si nano-technology are the electronic defects in high-k materials. It has been established that defects do exist in high-k dielectrics and they play an important role in device operation. However, very little is known about the nature of the defects or about possible techniques to eliminate, or at least minimize them. Given the absence of a feasible alternative in the near future, well-focused scientific research and aggressive development programs on high-k gate dielectrics and related devices must continue for semiconductor electronics to remain a competitive income producing force in the global market.
Download or read book Understanding Solids written by Richard J. D. Tilley and published by John Wiley & Sons. This book was released on 2013-03-22 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a modern introduction to the chemistry and physics of solids. This textbook takes a unique integrated approach designed to appeal to both science and engineering students. Review of 1st edition “an extremely wide-ranging, useful book that is accessible to anyone with a firm grasp of high school science...this is an outstanding and affordable resource for the lifelong learner or current student.” Choice, 2005 The book provides an introduction to the chemistry and physics of solids that acts as a foundation to courses in materials science, engineering, chemistry, and physics. It is equally accessible to both engineers and scientists, through its more scientific approach, whilst still covering the material essential to engineers. This edition contains new sections on the use of computing methods to solve materials problems and has been thoroughly updated to include the many developments and advances made in the past 10 years, e.g. batteries, solar cells, lighting technology, lasers, graphene and graphene electronics, carbon nanotubes, and the Fukashima nuclear disaster. The book is carefully structured into self-contained bite-sized chapters to enhance student understanding and questions have been designed to reinforce the concepts presented. The supplementary website includes Powerpoint slides and a host of additional problems and solutions.
Download or read book Metal Oxide Nanoparticles written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-10 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ein umfassendes Referenzwerk für Chemiker und Industriefachleute zum Thema Nanopartikel Nanopartikel aus Metalloxid sind ein wesentlicher Bestandteil zahlreicher natürlicher und technologischer Prozesse ? von der Mineralumwandlung bis zur Elektronik. Darüber hinaus kommen Metalloxid-Nanopartikel in Pulverform im Maschinenbau, in der Elektronik und der Energietechnik zum Einsatz. Das Werk Metal Oxide Nanoparticles: Formation, Functional Properties and Interfaces stellt die wichtigsten Synthese- und Formulierungsansätze bei der Nutzung von Metalloxid-Nanopartikeln als Funktionsmaterialien vor. Es werden die üblichen Verarbeitungswege erklärt und die physikalischen und chemischen Eigenschaften der Partikel mithilfe von umfassenden und ergänzenden Charakterisierungsmethoden bewertet. Dieses Werk kann als Einführung in die Formulierung von Nanopartikeln, ihre Grenzflächenchemie und ihre funktionellen Eigenschaften im Nanobereich genutzt werden. Darüber hinaus dient es zum vertiefenden Verständnis, denn das Buch enthält detaillierte Angaben zu fortschrittlichen Methoden bei der physikalischen, chemischen, Oberflächen- und Grenzflächencharakterisierung von Metalloxid-Nanopartikeln in Pulvern und Dispersionen. *Erläuterung der Anwendung von Metalloxid-Nanopartikeln und der wirtschaftlichen Auswirkungen *Betrachtung der Partikelsynthese, einschließlich der Grundsätze ausgewählter Bottom-up-Strategien *Untersuchung der Formulierung von Nanopartikeln mit einer Auswahl von Verarbeitungs- und Anwendungswegen *Diskussion der Bedeutung von Partikeloberflächen und -grenzflächen für Strukturbildung, Stabilität und funktionelle Materialeigenschaften *Betrachtung der Charakterisierung von Metalloxid-Nanopartikeln auf verschiedenen Längenskalen In diesem Buch finden Forscher im akademischen Bereich, Chemiker in der Industrie und Doktoranden wichtige Erkenntnisse über die Synthese, Eigenschaften und Anwendungen von Metalloxid-Nanopartikeln.
Download or read book Engineering Ceramics written by M. Bengisu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handy reference for technicians who want to understand the nature, properties and applications, of engineering ceramics. The book meets the needs of those working in the ceramics industry, as well as of technicians and engineers involved in the application of ceramic materials.
Download or read book Interaction of Cells with Natural and Foreign Surfaces written by N. Crawford and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: It would be difficult to think of a more important field of study in medicine than the interaction of cells with natural and foreign surfaces, but it is rare for those in the practice of medicine and surgery to get together with the basic scientists to discuss what they know about it, so that ground of common interest can be explored. Perhaps the symposium should have been entitled "Interactions between those interested in cell surfaces ••• " because it is here that the chief value of such meetings must lie. Even a brief perusal of this volume shows just how far advanced thought and work are on some facets of the topic. Some of the most pressing problems in medicine are those of tumour spread and of thrombosis of blood vessels where surface phenomena are of paramount importance. Our understanding is still very limited but, as the symposium illustrated, the answers are only to be found by study at fundamental levels, the work gaining direction and point from interaction with surgeons and others concerned with the actual disease states.
Download or read book Concise Encyclopedia of Semiconducting Materials Related Technologies written by S. Mahajan and published by Elsevier. This book was released on 2013-10-22 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of electronic materials and particularly advances in semiconductor technology have played a central role in the electronics revolution by allowing the production of increasingly cheap and powerful computing equipment and advanced telecommunications devices. This Concise Encyclopedia, which incorporates relevant articles from the acclaimed Encyclopedia of Materials Science and Engineering as well as newly commissioned articles, emphasizes the materials aspects of semiconductors and the technologies important in solid-state electronics. Growth of bulk crystals and epitaxial layers are discussed in the volume and coverage is included of defects and their effects on device behavior. Metallization and passivation issues are also covered. Over 100 alphabetically arranged articles, written by world experts in the field, are each intended to serve as the first source of information on a particular aspect of electronic materials. The volume is extensively illustrated with photographs, diagrams and tables. A bibliography is provided at the end of each article to guide the reader to recent literature. A comprehensive system of cross-references, a three-level subject index and an alphabetical list of articles are included to aid readers in the abstraction of information.
Download or read book An Essential Guide to Electronic Material Surfaces and Interfaces written by Leonard J. Brillson and published by John Wiley & Sons. This book was released on 2016-05-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Essential Guide to Electronic Material Surfaces and Interfaces is a streamlined yet comprehensive introduction that covers the basic physical properties of electronic materials, the experimental techniques used to measure them, and the theoretical methods used to understand, predict, and design them. Starting with the fundamental electronic properties of semiconductors and electrical measurements of semiconductor interfaces, this text introduces students to the importance of characterizing and controlling macroscopic electrical properties by atomic-scale techniques. The chapters that follow present the full range of surface and interface techniques now being used to characterize electronic, optical, chemical, and structural properties of electronic materials, including semiconductors, insulators, nanostructures, and organics. The essential physics and chemistry underlying each technique is described in sufficient depth for students to master the fundamental principles, with numerous examples to illustrate the strengths and limitations for specific applications. As well as references to the most authoritative sources for broader discussions, the text includes internet links to additional examples, mathematical derivations, tables, and literature references for the advanced student, as well as professionals in these fields. This textbook fills a gap in the existing literature for an entry-level course that provides the physical properties, experimental techniques, and theoretical methods essential for students and professionals to understand and participate in solid-state electronics, physics, and materials science research. An Essential Guide to Electronic Material Surfaces and Interfaces is an introductory-to-intermediate level textbook suitable for students of physics, electrical engineering, materials science, and other disciplines. It is essential reading for any student or professional engaged in surface and interface research, semiconductor processing, or electronic device design.
Download or read book Porous Silicon Science and Technology written by Jean-Claude Vial and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery of bright visible light emission from porous silicon has opened the door to various nanometer sized silicon structures where the confinement of carriers gives rise to interesting physical properties. While the high efficiency of the light emission in the visible range is the common and the most prominent feature, their structures display similar properties with other highly divided materials (even non semiconductors), and then justify a multidisciplinary approach. This along with potential applications has attracted a large number of researchers followed by students to be trained. Until now international conferences have provided the exchange of information but have remained highly specialised so it was time to give thought to the organisation of topical and advanced lectures where the multidisciplinarity and the didactic approach are paramount. L'ecole des Houches was ideally devoted to that purpose. The meeting : " Luminescence of porous silicon and silicon nanostructures" was the first international school on this topic but some aspects in the organisation and the attendance have given an international workshop flavor to it. The school by itself has trained 82 «students», most of them were students starting their Ph. D thesis. 50% were French citizens and the other represented countries were Germany, England, USA, Czechoslovakia, The Netherlands, Italy, Japan, Poland, Spain, Canada, Brazil, India and Russia.
Download or read book Handbook of Surfaces and Interfaces of Materials Five Volume Set written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-10-26 with total page 1915 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together, under a single cover, all aspects of the chemistry, physics, and engineering of surfaces and interfaces of materials currently studied in academic and industrial research. It covers different experimental and theoretical aspects of surfaces and interfaces, their physical properties, and spectroscopic techniques that have been applied to a wide class of inorganic, organic, polymer, and biological materials. The diversified technological areas of surface science reflect the explosion of scientific information on surfaces and interfaces of materials and their spectroscopic characterization. The large volume of experimental data on chemistry, physics, and engineering aspects of materials surfaces and interfaces remains scattered in so many different periodicals, therefore this handbook compilation is needed.The information presented in this multivolume reference draws on two decades of pioneering research on the surfaces and interfaces of materials to offer a complete perspective on the topic. These five volumes-Surface and Interface Phenomena; Surface Characterization and Properties; Nanostructures, Micelles, and Colloids; Thin Films and Layers; Biointerfaces and Applications-provide multidisciplinary review chapters and summarize the current status of the field covering important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniques with contributions from internationally recognized experts from all over the world. Fully cross-referenced, this book has clear, precise, and wide appeal as an essential reference source long due for the scientific community. The complete reference on the topic of surfaces and interfaces of materialsThe information presented in this multivolume reference draws on two decades of pioneering researchProvides multidisciplinary review chapters and summarizes the current status of the fieldCovers important scientific and technological developments made over past decades in surfaces and interfaces of materials and spectroscopic techniquesContributions from internationally recognized experts from all over the world
Download or read book Laser Induced Damage in Optical Materials written by Arthur H. Guenther and published by ASTM International. This book was released on 1977 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Dielectric Constant Materials written by Howard Huff and published by Springer Science & Business Media. This book was released on 2005 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues relating to the high-K gate dielectric are among the greatest challenges for the evolving International Technology Roadmap for Semiconductors (ITRS). More than just an historical overview, this book will assess previous and present approaches related to scaling the gate dielectric and their impact, along with the creative directions and forthcoming challenges that will define the future of gate dielectric scaling technology. Topics include: an extensive review of Moore's Law, the classical regime for SiO2 gate dielectrics; the transition to silicon oxynitride gate dielectrics; the transition to high-K gate dielectrics (including the drive towards equivalent oxide thickness in the single-digit nanometer regime); and future directions and issues for ultimate technology generation scaling. The vision, wisdom, and experience of the team of authors will make this book a timely, relevant, and interesting, resource focusing on fundamentals of the 45 nm Technology Generation and beyond.
Download or read book Laser Induced Damage in Optical Materials 1989 written by Harold Earl Bennett and published by . This book was released on 1990 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High k Gate Dielectric Materials written by Niladri Pratap Maity and published by CRC Press. This book was released on 2020-12-18 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores and addresses the challenges of high-k gate dielectric materials, one of the major concerns in the evolving semiconductor industry and the International Technology Roadmap for Semiconductors (ITRS). The application of high-k gate dielectric materials is a promising strategy that allows further miniaturization of microelectronic components. This book presents a broad review of SiO2 materials, including a brief historical note of Moore’s law, followed by reliability issues of the SiO2 based MOS transistor. It goes on to discuss the transition of gate dielectrics with an EOT ~ 1 nm and a selection of high-k materials. A review of the various deposition techniques of different high-k films is also discussed. High-k dielectrics theories (quantum tunneling effects and interface engineering theory) and applications of different novel MOSFET structures, like tunneling FET, are also covered in this book. The volume also looks at the important issues in the future of CMOS technology and presents an analysis of interface charge densities with the high-k material tantalum pentoxide. The issue of CMOS VLSI technology with the high-k gate dielectric materials is covered as is the advanced MOSFET structure, with its working structure and modeling. This timely volume will prove to be a valuable resource on both the fundamentals and the successful integration of high-k dielectric materials in future IC technology.
Download or read book Materials and Process Characterization written by Norman G. Einspruch and published by Academic Press. This book was released on 2014-12-01 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics: Microstructure Science, Volume 6: Materials and Process Characterization addresses the problem of how to apply a broad range of sophisticated materials characterization tools to materials and processes used for development and production of very large scale integration (VLSI) electronics. This book discusses the various characterization techniques, such as Auger spectroscopy, secondary ion mass spectroscopy, X-ray topography, transmission electron microscopy, and spreading resistance. The systematic approach to the technologies of VLSI electronic materials and device manufacture are also considered. This volume is beneficial to materials scientists, chemists, and engineers who are commissioned with the responsibility of developing and implementing the production of materials and devices to support the VLSI era.
Download or read book Springer Handbook of Crystal Growth written by Govindhan Dhanaraj and published by Springer Science & Business Media. This book was released on 2010-10-20 with total page 1823 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the years, many successful attempts have been chapters in this part describe the well-known processes made to describe the art and science of crystal growth, such as Czochralski, Kyropoulos, Bridgman, and o- and many review articles, monographs, symposium v- ing zone, and focus speci cally on recent advances in umes, and handbooks have been published to present improving these methodologies such as application of comprehensive reviews of the advances made in this magnetic elds, orientation of the growth axis, intro- eld. These publications are testament to the grow- duction of a pedestal, and shaped growth. They also ing interest in both bulk and thin- lm crystals because cover a wide range of materials from silicon and III–V of their electronic, optical, mechanical, microstructural, compounds to oxides and uorides. and other properties, and their diverse scienti c and The third part, Part C of the book, focuses on - technological applications. Indeed, most modern ad- lution growth. The various aspects of hydrothermal vances in semiconductor and optical devices would growth are discussed in two chapters, while three other not have been possible without the development of chapters present an overview of the nonlinear and laser many elemental, binary, ternary, and other compound crystals, KTP and KDP. The knowledge on the effect of crystals of varying properties and large sizes. The gravity on solution growth is presented through a c- literature devoted to basic understanding of growth parison of growth on Earth versus in a microgravity mechanisms, defect formation, and growth processes environment.
