Download or read book Plate Stability by Boundary Element Method written by Abbas Elzein and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. 1 Historical Background Thin plates and shells are widely used structural elements in numerous civil, mechanical, aeronautical and marine engineering design applications. Floor slabs, bridge decks, concrete pavements, sheet pile retaining walls are all, under normal lateral loading circumstances, instances of plate bending in civil engineering. The problem of elastic instability of plates occurs when load is applied in a direction parallel to the plane of the plate. The deck of a bridge subjected to a strong wind loading, the web of a girder under the action of shear forces transmitted by the flanges, the turbine blade of a machinery undergoing longitudinal temperature differentials, would all eventually buckle when the applied load, or its temperature equivalent in the last case, exceeds a certain limit, that is the buckling load. Although the plate may exhibit a considerable post-buckling strength, the buckling load is considered in many design instances, especially in aeronautical and marine engineering, as a serviceability limit because of the abrupt and substantial change in the dimensions and shape of the buckled plate. Nevertheless, the post-buckling region retains its importance either as an essential safety margin or as a stage of loading actually reached under normal loading conditions. The design engineer will therefore need rigorous tools of analysis to predict, in addition to the buckling load, the deflections and stresses at both buckling and initial post-buckling stages.
Download or read book The Boundary Element Method for Plate Analysis written by John T. Katsikadelis and published by Elsevier. This book was released on 2014-07-16 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boundary Element Method for Plate Analysis offers one of the first systematic and detailed treatments of the application of BEM to plate analysis and design. Aiming to fill in the knowledge gaps left by contributed volumes on the topic and increase the accessibility of the extensive journal literature covering BEM applied to plates, author John T. Katsikadelis draws heavily on his pioneering work in the field to provide a complete introduction to theory and application. Beginning with a chapter of preliminary mathematical background to make the book a self-contained resource, Katsikadelis moves on to cover the application of BEM to basic thin plate problems and more advanced problems. Each chapter contains several examples described in detail and closes with problems to solve. Presenting the BEM as an efficient computational method for practical plate analysis and design, Boundary Element Method for Plate Analysis is a valuable reference for researchers, students and engineers working with BEM and plate challenges within mechanical, civil, aerospace and marine engineering. One of the first resources dedicated to boundary element analysis of plates, offering a systematic and accessible introductory to theory and application Authored by a leading figure in the field whose pioneering work has led to the development of BEM as an efficient computational method for practical plate analysis and design Includes mathematical background, examples and problems in one self-contained resource
Download or read book Boundary Element Analysis of Plates and Shells written by Dimitri E. Beskos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of plates and shells under static and dynamic loads is of greatinterest to scientists and engineers both from the theoretical and the practical viewpoint. The Boun- dary Element Method (BEM) has some distinct advantages over domain techniques such as the Finite Difference Method (FDM) and the Finite Element Method (FEM) for a wide class of structuralanalysis problems. This is the first book to deal specifically with the analysis of plates and shells by the BEM and to cover all aspects of their behaviour, and combi- nes tutorial and state-of-the-art articles on the BEM as ap- plied to plates and shells. It aims to inform scientists and engineers about the use and the advantages of this techni- que, the most recent developments in the field and the per- tinent literature for further study.
Download or read book Boundary Element Formulations for Thick Plates written by Youssef F. Rashed and published by Computational Mechanics. This book was released on 2000 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate bending problems have many applications in civil and mechanical engineering. The analysis of plates using the Boundary Element Method (BEM), however, has received little attention in existing research and literature. This book presents new Boundary Element formulations for plate bending problems in which the Reissner plate bending theory is used to model the bending behaviour of the plate. The author applies several integral equations to solve engineering problems relating to a building slab, beam, footing, and simple raft and the results are compared against analytical solutions such as a finite difference method, a finite element method and a three-dimensional boundary element method. These confirm that the Boundary Element formulations presented are a competitive alternative to existing numerical methods.
Download or read book Recent Advances in Boundary Element Methods written by George Manolis and published by Springer Science & Business Media. This book was released on 2009-05-12 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, dedicated to Professor Dimitri Beskos, contains contributions from leading researchers in Europe, the USA, Japan and elsewhere, and addresses the needs of the computational mechanics research community in terms of timely information on boundary integral equation-based methods and techniques applied to a variety of fields. The contributors are well-known scientists, who also happen to be friends, collaborators as past students of Dimitri Beskos. Dimitri is one the BEM pioneers who started his career at the University of Minnesota in Minneapolis, USA, in the 1970s and is now with the University of Patras in Patras, Greece. The book is essentially a collection of both original and review articles on contemporary Boundary Element Methods (BEM) as well as on the newer Mesh Reduction Methods (MRM), covering a variety of research topics. Close to forty contributions compose an over-500 page volume that is rich in detail and wide in terms of breadth of coverage of the subject of integral equation formulations and solutions in both solid and fluid mechanics.
Download or read book Plate Bending Analysis with Boundary Elements written by M. H. Aliabadi and published by Computational Mechanics. This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the application of the boundary element to plate bending problems has gained much popularity. This book brings together leading researchers in the field of BEM and plate bending to provide a comprehensive and detailed report of these advances.
Download or read book Buckling And Postbuckling Structures Experimental Analytical And Numerical Studies written by Brian G Falzon and published by World Scientific. This book was released on 2008-05-23 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth treatment of the study of the stability of engineering structures. Contributions from internationally recognized leaders in the field ensure a wide coverage of engineering disciplines in which structural stability is of importance, in particular the analytical and numerical modelling of structural stability applied to aeronautical, civil, marine and offshore structures. The results from a number of comprehensive experimental test programs are also presented, thus enhancing our understanding of stability phenomena as well as validating the analytical and computational solution schemes presented. A variety of structural materials are investigated with special emphasis on carbon-fibre composites, which are being increasingly utilized in weight-critical structures. Instabilities at the meso- and micro-scales are also discussed. This book will be particularly relevant to professional engineers, graduate students and researchers interested in structural stability./a
Download or read book The Boundary Element Method for Groundwater Flow written by Erwin K. Bruch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the application of the boundary element method to the solution of the Laplace equation is examined. This equation is of fundamental importance in engineering and science as it describes different types of phenomena, inclu- ding the groundwater flow applications highlighted in this book. Special subjects such as numerical integration, subdi- visionof the domain into regions and other computational aspects are discussed in detail in the first chapters. To demonstrate the accuracy and efficiency of the boundary ele- ment method, results obtained when solving the Laplace equa- tion have been compared against known analytical solutions. Other chapters deal with problems such as steady and unstea- dy flow in addition to infiltration problems. The applica- tions demonstrate that the boundary element method provides a powerful solution technique which can be effectively ap- plied to solve this type of problem.
Download or read book Introduction to Boundary Elements written by Friedel Hartmann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: to Boundary Elements Theory and Applications With 194 Figures Springer-Verlag Berlin Heidelberg New York London Paris Tokyo Hong Kong Dr.-Ing. Friedel Hartmann University of Dortmund Department of Civil Engineering 4600 Dortmund 50 FRG ISBN-13: 978-3-642-48875-7 e-ISBN-13: 978-3-642-48873-3 001: 10.1007/978-3-642-48873-3 Library of Congress Cataloging-in-Publication Data Hartmann, F. (Friedel) Introduction to boundary elements: theory and applications/Friedel Hartmann. ISBN-13: 978-3-642-48875-7 1. Boundary value problems. I. Title. TA347.B69H371989 515.3'5--dc19 89-4160 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, re-use of illustrations, recitation, broadcasting, reproduction on microfilms or in other ways, and storage in data banks. Duplication of this publication or parts thereof is only permitted under the provision of the German Copyright Law of September 9,1965, in its version of June 24,1985, and a copyright fee must always be paid. Violations fall under the prosecution act of the German Copyright Law. © Springer-Verlag Berlin Heidelberg 1989 Softcover reprint of the hardcover 1 st edition 1989 The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use.
Download or read book Boundary Element Methods in Structural Analysis written by D. E. Beskos and published by . This book was released on 1989 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Elements and Other Mesh Reduction Methods XXXIII written by C. A. Brebbia and published by WIT Press. This book was released on 2011 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Wessex Institute of Technology has been convening conferences on the Boundary Element Method since 1978. The now-annual conference series is recognised internationally as the premiere forum for sharing the latest advances on the boundary element method and other meshless techniques and their applications, which continue to evolve and grow in importance. The papers presented at the latest conference will cover topics such as Advanced meshless and mesh reduction methods; Heat and mass transfer; Electrical engineering and electromagnetics; Fluid flow; Advanced formulations; Computational techniques; Advanced structural applications; Dynamics and vibrations; Damage mechanics and fracture; Material characterisation; Financial engineering applications; Stochastic modelling; and Emerging applications..
Download or read book Advances in Computer Technology and Applications in Japan written by Thirwalam K.S. Murthy and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains chapters written by eminent scientists on the latest development in computer technology and applica- tions in Japan. The objective of the book is to provide an awareness of the considerable advances being made by Japane- se scientists on the general area of information technology and in the so-called Fifth Generation Computer Systems. In the first chapter, Watanabe of the NEC Corporation, descri- bes advanced architecture and technology of supercomputing systems. This theme is followed by Nakamura of Tohoku Uni- versity in the next chapter. Another type of supercomputer for vector processing, the FACOM VP 2000 Series is then des- cribed by Uchida ofFujitsu Ltd in Chapter 3. Expert systems are presented in the next two chapters by Ue- no and Oomari of Tokyo Denki University and by Koseki and Goto of the NEC Corporation. Important applications in com- puter graphics are described in Chapter Six by Ishii and Mu- rakami of Fujitsu Laboratories. Hayahi from the same Labora- tory then discusses neurocomputers in Japan. The final chap- ter by Noguchi of Tohoku Universityillustrates an important application in communications.
Download or read book Stability of Structures by Finite Element Methods written by Z. Waszczyszyn and published by Elsevier. This book was released on 2013-10-22 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the consequence of research undertaken by the authors in the field of advanced problems of structural mechanics. Stability analysis of structures comes under this area because of the complex models and computational methods needed for analysis. In the mid seventies, a joint effort began between a group of researchers and teachers of the Department of Civil Engineering and Computer Center of the Cracow University of Technology. One of the important results of the collaboration has been this publication.
Download or read book Boundary Stabilization of Thin Plates written by John E. Lagnese and published by SIAM. This book was released on 1989-01-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents one of the main directions of research in the area of design and analysis of feedback stabilizers for distributed parameter systems in structural dynamics. Important progress has been made in this area, driven, to a large extent, by problems in modern structural engineering that require active feedback control mechanisms to stabilize structures which may possess only very weak natural damping. Much of the progress is due to the development of new methods to analyze the stabilizing effects of specific feedback mechanisms. Boundary Stabilization of Thin Plates provides a comprehensive and unified treatment of asymptotic stability of a thin plate when appropriate stabilizing feedback mechanisms acting through forces and moments are introduced along a part of the edge of the plate. In particular, primary emphasis is placed on the derivation of explicit estimates of the asymptotic decay rate of the energy of the plate that are uniform with respect to the initial energy of the plate, that is, on uniform stabilization results. The method that is systematically employed throughout this book is the use of multipliers as the basis for the derivation of a priori asymptotic estimates on plate energy. It is only in recent years that the power of the multiplier method in the context of boundary stabilization of hyperbolic partial differential equations came to be realized. One of the more surprising applications of the method appears in Chapter 5, where it is used to derive asymptotic decay rates for the energy of the nonlinear von Karman plate, even though the technique is ostensibly a linear one.
Download or read book Boundary Element Methods written by Masataka Tanaka and published by Elsevier Publishing Company. This book was released on 1996 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains research topics on the boundary element methods of both basic mathematical schemes and engineering applications. It aims to provide research workers in computational mechanics and engineering with up-to-date information on applied research in the field.
Download or read book Boundary Element Methods written by S. Kobayashi and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Element Methods (BEM) has become one of the most efficient tools for solving various kinds of problems in engineering science. The International Association for Boundary Element Methods (IABEM) was established in order to promote and facilitate the exchange of scientific ideas related to the theory and applications of boundary element methods. The aim of this symposium is to provide a forum for researchers in boundary element methods and boundary-integral formulations in general to present contemporary concepts and techniques leading to the advancement of capabilities and understanding of this com putational methodology. The topics covered in this symposium include mathematical and computational aspects, applications to solid mechanics, fluid mechanics, acoustics, electromagnetics, heat transfer, optimization, control, inverse problems and other interdisciplinary problems. Papers deal ing with the coupling of the boundary element method with other computational methods are also included. The editors hope that this volume presents some innovative techniques and useful knowl edge for the development of the boundary element methods. February, 1992 S. Kobayashi N. Nishimura Contents Abe, K.
Download or read book Boundary Element Analysis of Plates and Shells written by D. E. Beskos and published by Springer Verlag. This book was released on 1991 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
